TX515A Cleanroom Lables - 1.5" Round Autoclave

ITW Texwipe is proud to introduce the Ready-to-Order Cleanroom Label Program. Texwipe’s pressure-sensitive cleanroom labels are designed for critical environments and are made from material that is low out-gassing, has ultra-low leachables and low particulates. Wound on a recyclable 3” high-impact polyethylene core, each label is tested for surface particles, cleaned, double bagged and packaged in a controlled environment.

 

Texwipe Autoclavable label stock is a Teslin® material designed for label printing and can be used with most conventional inks*. The label is also designed to prevent the removal of written data during the autoclave process. Texwipe autoclave label stock has a matte finish and permanent adhesive to provide excellent adhesion. Ideal for applications requiring label and label data to maintain integrity through autoclave process.

 

TX515A Cleanroom Lables Technical Data:
  - Label Composition: Teslin®
  - Film Thickness: 7.0 mil. ± 10%
  - Opacity: 92%
  - Adhesive Composition: Acrylic-based
  - Adhesive Thickness: .9 mil - 1.0 mil ± 0.1
  - Avg. Adhesive Peel P (*): 58
  - Top Coat Thickness: N/A
  - Release Liner: Clear Polyester
  - Release Liner Thickness: 1.4 mil. ± 10%
  - Min. Application Temp.: 50°F (10°C)
  - Service Temp.: -40°F to 250°F (-40°C to 121°C)
  - Stability: Two years stored at 70°F (21°C)

  - Packaging: Cleaned and double bagged in Class 10 cleanroom.Wound on 3" ID polyethylene core.

 

(*) This data represents test averages conducted on polished stainless steel / 72 hr. dwell.Peel adhesion tests should be conducted on the end-use application in end-use conditions to ensure adhesion requirements are met.