AlphaSat® with Vectra® AlphaSorb® 10 Pre-Wetted Cleanroom WipersHigh-absorbency sealed-border polyester wipes with precision wet-out.AlphaSat® with Vectra® AlphaSorb® 10 pairs Texwipe’s AlphaSorb® 10 sealed-border wiper with controlled, ready-to-use saturation for critical cleaning. Each wipe is 100% continuous-filament, two-ply double-knit polyester sealed on all four sides, then processed on the automated Vectra® cleaning system to deliver very low particles, fibers, ions, and non-volatile residues (NVR/extractables). The two-ply construction adds extra sorption capacity, making this a go-to option for spill control and general wiping in ISO Class 3–5 mini-environments and semiconductor tools where absorbency and contamination control both matter. These wipes are pre-wetted to optimized, repeatable levels with 0.2 μm-filtered semiconductor-grade IPA and DI water (10% IPA / 90% purified water in standard TX1057 configuration), so every wipe delivers uniform solvent load and contact time. That consistency reduces squirt-bottle handling, lowers VOC exposure, and tightens SOP repeatability, while the reclosable flatpack bag preserves wetness and cleanliness between uses. Browse AlphaSat® with Vectra® AlphaSorb® 10 options below for high-precision solvent wipe-downs, spill pickup, and ultra-low-particle cleaning in critical cleanroom environments. |