TX3212 SterileWipe LP10 12" x 12" 100% Polyester Cleanroom Wiper

TX3212 SterileWipe LP10 is low-linting (no wiper is truly ‘zero-lint’ in every process condition), cleanroom-laundered 100% continuous-filament polyester knit wiper with thermally sealed borders designed to control particle and fiber contamination. Each package is gamma irradiated to a 10⁻⁶ Sterility Assurance Level for cleaning critical sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.

• Size: 12" x 12" (31 cm x 31 cm) nominal
• Material: 100% continuous-filament polyester knit
• Edge: Thermally sealed borders (sealed border)
• Sterile: Yes — gamma irradiated to 10⁻⁶ Sterility Assurance Level (SAL)
• Packaging: 100 wipers/bag (5 inner bags of 20); 5 bags/case (Case Only)
• Type: Dry Wiper
• Wiper family: Vectra Alpha 10
• Wiper material: Polyester
• ISO Class (site listing): ISO 2–8 (Class < 1 to Class 100,000)
• Use environments: Critical sterile environments (final suitability depends on your process, chemistry, and cleaning method)

Texwipe (an ITW company) positions sterile wiping materials as engineered inputs for contamination-control programs where sterility assurance, lot traceability, and documentation discipline are part of routine quality review. SterileWipe™ LP10 pairs cleanroom laundering with thermally sealed borders intended to control particle and fiber release, then applies gamma irradiation to support use in critical sterile environments.

Texwipe also emphasizes lot-specific documentation for sterile programs (including processing/compliance paperwork and expiration dating). SOSCleanroom (SOS) supports that documentation posture with continuity of supply and practical application support—so customers can standardize sterile wiping materials with predictable handling and procurement reliability while maintaining audit readiness.

• Gamma irradiated to 10⁻⁶ Sterility Assurance Level, according to AAMI Guidelines
• Lot-specific information on each shipment simplifies record keeping
• Certificate of Processing confirming radiation dosage
• Certification of Compliance
• Expiration date marked on each package
• Cleanroom-laundered 100% polyester knit with thermally sealed borders
• Independent quality control audits for sterility assurance

• Chemical-use flexibility: Withstands exposure to common cleaning and disinfecting solutions including bleaches, phenols and quaternary ammonium compounds (verify compatibility to your chemistry and SOP).
• Sterile contamination control: Extremely low levels of releasable particles and fibers consistent with requirements for sterile Class 100 cleanroom environments (process-dependent).
• Bag introduction control: Packaging permits alcohol wipe down of exterior bag before introduction of the inner bag into sterile suites.
• Strength under load: Superior strength allows for rigorous wiping with minimal release of fibers and particles.
• Surface glide: Wiper glides smoothly over surfaces.
• Traceability: Assures quality of individual lots and lot-to-lot traceability.

• Developed to clean sterile environments without compromising the sterile nature of those environments
• Designed for cleaning and polishing equipment and environmental surfaces during and following the production flow
• Ideal for applying cleaning, sterilizing and disinfecting solutions

• Control pack entry: Wipe down the exterior bag per your sterile suite entry practice; open only when you are ready to transfer the inner bag.
• Fold for control: Fold into consistent pads to create multiple clean faces; rotate faces instead of re-wiping with a loaded surface.
• Wipe pattern: Use straight-line, overlapping strokes (top-to-bottom or left-to-right) to reduce redeposition.
• Wet-load control: Apply disinfectant/solution per SOP intent; avoid over-wetting to reduce drips and solvent pooling.
• Change-out triggers: Replace the wiper when a face becomes visibly loaded, starts smearing, or leaves residue.

• TX3212 vs. TX3211: Same SterileWipe™ LP10 sterile polyester concept, but TX3212 is the larger 12" x 12" format for coverage and wet wipe-downs; TX3211 is often chosen when a 9" x 9" format improves control in tight areas.
• Dry vs. pre-wetted sterile: If you want consistent wetting and reduced solvent handling, consider sterile pre-wetted AlphaSat® 10 formats built on the SterileWipe™ LP platform (commonly 70% IPA options for routine sterile wipe-downs).
• Sealed-border strategy: If perimeter shedding risk is part of your particulate control strategy, prioritize sealed-border/laser-sealed constructions and confirm acceptance criteria (particles, fibers, NVR, ions) during receiving/qualification.

Sterile Polyester Wipers

• TX3211: SterileWipe LP 9" x 9" polyester knit wiper, sealed border
• TX3215: SterileWipe AS10 12" x 12" sterile polyester knit, sealed border
• TX3042: Sterile Vertex 12" x 12" polyester sealed-edge wiper

Sterile Blended/Pre-Wetted Alternatives

• TX3210: SterileWipe HSII 12" x 12" cellulose/polyester sterile wiper
• TX3285: Sterile AlphaSat 10 9" x 9" pre-wetted 70% IPA (sterile)
• TX3214: Sterile TechniSat 9" x 11" pre-wetted 70% IPA (sterile)