Skip to main content
Ansell S-BCPM BioClean Sterile Chem Prep Mats Class 100 (ISO 5)

Ansell S-BCPM BioClean Sterile Chem Prep Mats Class 100 (ISO 5)

$545.70
(No reviews yet)
SKU:
S-BCPM
Availability:
7 - 10 Business Days
Shipping:
Calculated at Checkout
Quantity Option (Case):
100-200 Mats
Inner Packaging:
See Below
Ansell BioClean™ ChemPrep™ Sterile Prep Mats (S-BCPM) — Class 100 / ISO 5, EU GMP Grade A, Gamma-Sterilized (SAL 10-6), 3-Layer Absorbent / Leak-Proof Barrier Mat (Blue)
Sterile Class 100 / ISO 5 EU GMP Grade A Gamma Irradiated (Min. 25 kGy) SAL 10-6 3-Layer Leak Defense Latex-free Low-linting
Overview

BioClean™ ChemPrep™ Prep Mats (S-BCPM) are sterile, three-layer, highly absorbent work-surface mats designed to support hazardous drug preparation and other critical workflows where controlling leaks, drips, and contamination transfer matters. The construction uses a distribution layer to spread liquid, an absorbent core to capture it, and an impermeable layer to help defend the underlying surface.

Why Ansell through SOSCleanroom: When safety programs and audits demand consistency, it pays to standardize with best-in-class manufacturers. SOSCleanroom works closely with Ansell to support continuity of supply, documentation access, and dependable fulfillment for critical environments.

Why this mat matters in critical environments
  • Leak-proof barrier design: Three-layer construction is intended to distribute, absorb, and block liquids from reaching the bench.
  • Sterility assurance you can document: Gamma irradiation with a stated minimum dose and SAL supports sterile-area staging and work-surface controls.
  • Lower contamination risk at the work surface: Low-linting and individually wrapped presentation help minimize introduced contamination and handling issues.
  • Cleanroom alignment: Listed as Class 100 / ISO 5 and EU GMP Grade A compatible in published manufacturer information.
Typical tasks supported
  • Chemotherapy drug preparation and handling work-surface protection
  • Sterile staging and prep areas where drips/leaks must be contained at the bench interface
  • Controlled transfer zones (tray/bench protection during material setup)
  • Worksurface barrier protection for tasks that involve liquids and exposure-sensitive materials
Key specifications (published)
Cleanroom compatibility ISO Class 5 (Class 100) & EU GMP Grade A
Sterility / method Sterile; gamma irradiation (minimum dose 25 kGy); SAL 10-6
Construction Top: polyolefin apertured film; Middle: air-laid paper; Bottom: polyethylene
Color Blue
Basis weight 210 gsm
Sorptive capacity (typical) 852 ml/m2 and 83.3 ml/prep mat (IEST-RP-CC004.3)
Sizes / reorder codes 40cm x 25cm (S-BCPM-4025B) or 56cm x 40cm (S-BCPM-5640B)
Shelf life / storage 3 years from manufacture; store dry/cool (< 40°C) away from direct and fluorescent light
Quality standards (facility/process) Manufactured in ISO 9001:2015 facility; processed in NEBB certified ISO Class 5 environment

Note: Worksurface mats are a control—not a containment system. Always follow your facility SOPs for engineering controls, spill response, and hazardous waste handling.

Packaging and handling (sterile presentation)
Available quantity option Case (100–200 mats, depending on size)
S-BCPM-4025B (40cm x 25cm) 1 piece/inner PE bag; inner bag in a second PE bag; 50 double-bags/outer PE bag; 4 outer bags/lined carton (200 pieces)
S-BCPM-5640B (56cm x 40cm) 1 piece/inner PE bag; inner bag in a second PE bag; 25 double-bags/outer PE bag; 4 outer bags/lined carton (100 pieces)

Practical tip: Keep cases closed until needed and transfer only the quantity required for the shift to reduce unnecessary handling and packaging disruption.

USP <800> alignment notes (practical)

USP <800> focuses on reducing exposure risk to hazardous drugs through engineering controls, procedures, PPE, and cleaning/decontamination practices. A prep mat supports the work surface as part of the workflow, but you should still follow your validated deactivation, decontamination, and cleaning steps.

  • Change triggers: replace the mat when wet, damaged, after task completion, or per time-based SOP requirements.
  • Disposal: treat used mats as hazardous waste when used in HD workflows, per your facility program and local regulations.
  • Documentation: maintain lot/expiry traceability when required for audits and investigations.
EU GMP Annex 1 alignment notes (sterile manufacturing)

Annex 1 programs commonly manage work surfaces within a Contamination Control Strategy (CCS). If mats are used in Grade A zones, define how they are introduced, positioned, changed, and removed without disrupting aseptic discipline.

  • Validated transfer: bring mats into Grade A/B using your approved transfer method and packaging controls.
  • Controlled handling: avoid touching the working surface; stage and open packs using sterile technique.
  • Change control: lock size/spec substitutions through change management to prevent process drift.
Standards and references (where applicable)
Documentation

Use these documents for qualification packets, SOP support, and change-control review.

If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574. OR check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try! THIS IS NEW FOR 2026! © 2026 SOSCleanroom. All rights reserved.
The Technical Vault By SOSCleanroom
Hazardous Drug Workflows Aseptic Surface Control ISO 5 / Grade A Best-in-Class: Ansell + SOSCleanroom
The work surface is a risk boundary

In chemotherapy drug preparation and other exposure-sensitive workflows, the bench is not just “where the work happens”—it is an interface where spills, drips, and contact transfer can create downstream safety and contamination problems. A sterile prep mat is one of the simplest controls available: it creates a dedicated work zone that helps contain liquids at the point of use and reduces the chance of spreading contamination to trays, gloves, sleeves, countertops, and adjacent equipment.

Why the S-BCPM 3-layer build matters

The BioClean™ ChemPrep™ mat is designed around a practical reality: liquids rarely stay where they land. The top layer is intended to distribute liquid, the center layer provides absorption capacity, and the bottom layer helps prevent leakage through to the surface below. The result is a mat that behaves like a controlled “sink” for incidental fluids—not by magic, but by layered engineering.

Operational takeaway: The mat is most effective when it is treated as a consumable control—placed intentionally, changed proactively, and removed using the same discipline you would apply to gloves and wipes in a hazardous drug program.

Cleanroom and sterile-zone fit: ISO 5 / EU GMP Grade A

S-BCPM mats are published as suitable for ISO Class 5 / Class 100 environments and EU GMP Grade A contexts, and are gamma sterilized with a stated SAL. In practice, that means the mat can be staged as part of sterile-area workflow design—provided you define how it is introduced and handled under your contamination control strategy.

A practical use pattern (non-prescriptive)
  1. Stage: Bring in only the quantity needed for the session; keep the rest sealed to reduce unnecessary handling.
  2. Place: Position the mat to capture expected drip paths (primary work zone), not at the perimeter where it can be bypassed.
  3. Work: Avoid touching the working surface during setup; treat it like a controlled surface, similar to sterile field discipline.
  4. Change: Replace at task completion, if wet, or if compromised (tears, folds, punctures) per SOP triggers.
  5. Remove & dispose: Remove carefully to avoid “wicking” or spreading contamination; dispose per hazardous drug waste controls when applicable.
Why customers buy S-BCPM from SOSCleanroom
  • Standardization: two practical sizes with defined sterile packaging and published performance data help reduce “equivalent swap” risk.
  • Documentation-first support: product data sheets are easy to access for qualification, validation packets, and change control.
  • Best-in-class partnership: SOSCleanroom works closely with Ansell to support critical-environment customers who cannot afford supply disruption.
  • One-vendor efficiency: pair mats with cleanroom PPE, sterile gloves, wipes, and swabs to reduce POs and simplify receiving.
Common add-ons (frequently purchased together)
  • Ansell sterile cleanroom gloves: support a consistent, documented operator interface (sterile glove + controlled work surface).
  • Ansell BioClean chemo-protective sleeves/aprons: when programs require added garment protection at the forearm and torso interfaces.
  • Texwipe sterile wipes and swabs: for surface prep and cleaning steps as defined by your validated deactivation/decontamination/cleaning program.
If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574. OR check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try! THIS IS NEW FOR 2026! © 2026 SOSCleanroom. All rights reserved.