Skip to main content

Cleanroom EGV Industrial Grade Vinyl Support Tape

$378.51 - $480.69
(No reviews yet)
SKU:
EGV
Availability:
7 - 10 Business Days
Shipping:
Calculated at Checkout
Quantity Option (Case 1" x 36 Yards):
36 Rolls
Quantity Option (Case 2" x 36 Yards):
24 Rolls
Micronova EGV™ Industrial Grade Vinyl Support Tape (EGV) — Clean-Peel Vinyl Tape with Rubber Adhesive for Aisle Marking, Labeling, Batching & Clean-Build Tasks (36 Yards / Roll)
Vinyl Tape Rubber Adhesive Clean-Peel / Low Residue Write-On Surface Sleeve-Bagged 36 Yards / Roll

Overview

Micronova EGV™ is an industrial grade vinyl support tape designed for controlled-environment use cases where ultra-clean specialty tape is not required. It uses a rubber adhesive on a vinyl backing and is specified to form a strong bond on common facility surfaces while helping reduce adhesive residue when removed.

SOSCleanroom stocks proven, best-in-class consumables so teams can standardize materials, reduce substitutions, and keep maintenance and visual-management programs consistent.


Why this tape matters
  • Cleaner visual management: supports aisle marking, batching, and labeling with a tape intended for controlled environments.
  • Strong bond + clean-peel intent: rubber adhesive is specified for reliable adhesion with reduced residue on removal (when used correctly).
  • Cleaner handling: specified as sleeve-bagged and wound on a plastic core for better receiving and staging discipline.
  • Traceability support: part number and lot number are specified to print on each bag and case.

Typical applications
  • Aisle and zone marking (support corridors, staging zones, and controlled work areas)
  • Batch/lot identification, visual controls, and status labeling
  • Clean-build projects and facility maintenance tasks
  • General labeling where a write-on tape surface is preferred

Key specifications (published)
Material / adhesive Vinyl / Rubber adhesive
Roll length / core 36 yards (33 m) / 3" plastic core
Autoclavability Not autoclavable
Chemical compatibility Good compatibility with common solutions (manufacturer statement)
Packaging / traceability Sleeve-bagged (individual); part number and lot number printed on each bag and case
Irradiation Not irradiated

Practical tip: Clean-peel performance improves when surfaces are wiped and dried before application, and when tape is removed slowly at a low angle.


Ordering (SOSCleanroom case packs)
Available quantity option Case
Tape sizes (this listing) 1" x 36 yards or 2" x 36 yards
Case unit — 1" x 36 yards 36 rolls per case
Case unit — 2" x 36 yards 24 rolls per case
Available color options (this listing) Orange, White

Need additional widths or colors? The manufacturer lists more options; SOSCleanroom can help source the right configuration for your program.


Documentation

Use manufacturer documents for internal review, change control, and qualification packets.


If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574. OR check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try! THIS IS NEW FOR 2026! © 2026 SOSCleanroom. All rights reserved.
The Technical Vault
By SOSCleanroom
Micronova EGV™ Cleanroom Vinyl Support Tape — Industrial Grade Vinyl Tape with Rubber Adhesive (Clean-Peel / Low-Residue Intent), Sleeve-Bagged, Write-On Surface, 36 Yards/Roll (Non-Sterile)
Vinyl backing Rubber adhesive Clean-peel / low residue intent Write-on surface Sleeve-bagged 36 yards / roll Non-sterile

1. Practical solutions in a critical environment

Support-area tape is a control point, not a convenience item. It defines walkways, separates zones, flags status, seals bags, and reduces mix-ups during maintenance and clean-build work. When tape selection drifts to “whatever was nearby,” teams inherit residue events, rework, and inconsistent markings that undermine visual management.

Micronova EGV™ is built for controlled-environment support where ultra-clean specialty tape is not required. The intent is dependable adhesion on common facility surfaces with improved clean-peel behavior when removed correctly — and packaging that supports receiving and staging discipline.


2. What this tape is for
  • Aisle and zone marking (support corridors, staging zones, controlled work areas)
  • Batch/lot identification, visual controls, and status labeling
  • Clean-build projects and facility maintenance tasks
  • General labeling where a write-on tape surface is preferred

3. Selection rationale
  • Strong bond + clean-peel intent: Rubber adhesive is positioned for reliable adhesion with reduced residue on removal when used correctly.
  • Vinyl backing for support work: Useful for facility marking and general clean-build tasks where durability and conformability matter.
  • Write-on surface: Supports quick field marking for status and identification without improvising with uncontrolled materials.
  • Sleeve-bagged handling: Individually sleeve-bagged rolls support cleaner receiving/staging and point-of-use control.
  • Traceability-friendly: Packaging supports part/lot control at receiving and point-of-use per quality system.
SOSCleanroom selection philosophy
Tape success is station discipline: approved tape + approved surface prep + approved writing tool + defined dwell-time/removal practice. That is how you prevent residue surprises and “random tape” substitutions.

4. Materials and construction
  • Backing: Vinyl
  • Adhesive: Rubber
  • Core: 3" plastic core
  • Roll length: 36 yards (33 m)
  • Packaging: Sleeve bagged (individual)
  • Sterility: Non-sterile tape product

5. Specifications in context

Tape performance is a system outcome: surface condition, pressure/burnish, dwell time, chemistry exposure, and removal technique. EGV is positioned as a practical support-area tape; predictable results come from controlling the station, not from changing tape brands midstream.

Specification Value Operational meaning
Material / adhesive Vinyl / Rubber adhesive Workhorse combination for support marking and clean-build tasks; validate on your surfaces and cleaning chemistry.
Roll length / core 36 yards (33 m) / 3" plastic core Standard roll length supports consistent replenishment; 3" core fits common dispensers.
Autoclavability Not autoclavable Do not use for steam-cycle applications; choose validated autoclave indicator/high-temp tapes when required.
Chemical compatibility Good compatibility with common solutions (manufacturer statement) Confirm with your disinfectants/solvents and dwell times; chemical exposure is a primary residue driver.
Packaging / traceability Sleeve-bagged; part number + lot number printed on each bag and case Supports receiving controls and lot traceability at point-of-use.
Irradiation Not irradiated If your program requires irradiation, select an irradiated tape family instead.

Practical note: Clean-peel behavior improves when surfaces are wiped and fully dried before application, and when tape is removed slowly at a low peel angle.


6. Cleanliness metrics

EGV is positioned for cleanroom support use and is specified as sleeve-bagged for improved receiving and staging discipline. In practice, cleanliness outcomes depend heavily on roll exposure control and operator touch points at the tape station.

Practical control: Keep rolls in their sleeve until use, avoid touching adhesive edges, and reseal/overbag after opening per facility SOP.


7. Packaging, sterility, and traceability
  • Sterility: Non-sterile tape product
  • Packaging discipline: Sleeve-bagged rolls support staged introduction and reduced handling contamination
  • Traceability: Control part number/lot at receiving and at point-of-use per your quality system

8. Best-practice use
Customer SOP disclaimer
This guidance is provided as a suggested starting point for customer SOP development and operator training. Every facility and process is different. Customers must evaluate risk, validate procedures, and obtain appropriate QA approval before implementation.
  • Prep the surface: Wipe and dry the application area to remove oils and dust that reduce adhesion and increase residue risk.
  • Apply with firm pressure: Seat the adhesive evenly, especially along edges and corners.
  • Standardize overlap: If using tape for seam control, define overlap widths so barriers are repeatable.
  • Remove correctly: Peel slowly at a low angle to reduce adhesive transfer.
  • Know the limit: Not autoclavable — use validated high-temp/autoclave tapes when steam cycles are required.
Suggested pairings: tape-station items that improve adhesion consistency and traceability
These pairings reduce the two most common tape failures: poor surface condition and uncontrolled handling/writing tools at the tape station.
Use case Recommended item Why it pairs well
Surface prep before marking / floor-edge work Texwipe TX1009 AlphaWipe® 9" x 9" Polyester Cleanroom Wiper Removes films and dust that drive edge lift and residue at removal.
Detail cleaning at seams, corners, textured surfaces Texwipe TX761 Alpha Polyester Cleanroom Swab (Long Handle) Improves coverage in tight geometries where residues persist under tape edges.
Operator handling control at tape stations Ansell 93-311 Nitrilite™ Cleanroom Nitrile Gloves (ISO 5 / Class 100) Reduces oil transfer and uncontrolled touch points on tape and surfaces.
Write-on identification (batch, zone, status) Cleanroom Pens (Black or Blue) Keeps office pens out of controlled areas and supports consistent documentation practices.
High-contrast marking where a pen is not sufficient Cleanroom Irradiated Sharpie Markers Controlled marker option for fast ID on tape and packaging.
When a tape mark should become a structured label Texwipe TX515 Cleanroom Labels (1.5" x 1.5") Upgrades traceability with defined fields and cleaner presentation vs. handwritten tape notes.
Guardrail: Define dwell-time limits and a removal method (slow peel, low angle). Time-in-place + chemistry exposure drives most residue events.

9. Common failure modes
  • Residue at removal: Typically driven by long dwell time, chemistry exposure, or aggressive peel angle/speed.
  • Edge lift: Usually surface oils/dust/moisture or insufficient burnish pressure along edges.
  • Contamination at the tape station: Rolls left exposed or adhesive edges touched during use.
  • Wrong tape in an EPA/ESD area: If your program requires anti-static/ESD tape, confirm suitability before introducing general-purpose tape inside the zone.

10. Other tapes and marking tools to consider

Programs typically standardize multiple tape families: one for sealing/masking, one for facility marking, one for safety/striping, and labels for structured traceability.


11. Program fit for regulated cleanrooms
  • Visual management consistency: Standardizing tape families reduces substitutions that create residue, rework, and inconsistent markings.
  • Contamination control: Sleeve-bagged packaging supports controlled introduction when combined with station discipline.
  • Audit readiness: Defined tape selection + controlled writing tools + documented dwell/removal practice reduces “unknown materials” deviations.

12. Source basis
Product documentation
  • Micronova Product Specification / Technical Data Sheet (vinyl tape with rubber adhesive; 3" plastic core; 36 yards; sleeve bagged; not autoclavable; traceability statements): EGV Cleanroom Tape, Vinyl — Product Specification (PDF)
  • Micronova manufacturer product page (program intent, controlled-environment processing, sleeve-bagging, write-on usage): EGV™ Industrial Grade Vinyl Tape — Manufacturer Page
  • Pairing product listings used for station standardization: wipers, swabs, gloves, pens/markers, labels, and related tape families (linked in Sections 8 and 10).
Standards & guidance references
These references are included to support terminology and program alignment. Customers should confirm applicability to their processes and approved SOPs.

Technical Vault Notice
Important disclaimer: This entry is provided for general process support and reference only. It is not regulatory, legal, medical, or validation advice.
Customers must evaluate risk, confirm applicability to their processes, and follow their approved SOPs, QA requirements, and the manufacturer’s instructions for use.
Questions or documentation requests: Sales@SOSsupply.com  |  (214) 340-8574
Last reviewed: February 1, 2026
© 2026 SOSCleanroom.com