Product Summary
by SOSCleanroom
The TekniClean Pro® ESD Polyester Knit Wiper, Sealed Border, 9" x 9" is a dry cleanroom wiper packaged in an ESD static shield resealable bag for controlled use in static-sensitive environments. Designed for process-facing surfaces where both contamination control and electrostatic discipline matter, this polyester knit wiper supports low-lint wiping, strong absorbency, and consistent surface preparation in critical workflows.
Constructed from polyester knit material and finished with a sealed border, the wipe is intended to reduce edge-driven fiber release during wiping and abrasion. That combination helps operators maintain cleaner wipe-down performance on benches, carts, fixtures, tools, equipment exteriors, and other surfaces where loose particles, residue carryover, or static-related handling issues can increase rework risk.
The ESD-oriented platform makes this wipe well suited for electronics, semiconductor, and other static-sensitive operations where triboelectric charging during wiping can become part of the process risk. For teams implementing documentation-forward contamination control programs, TekniClean Pro ESD offers a practical balance of polyester durability, chemical compatibility, absorbency, and controlled handling.
Typical applications include routine wipe-downs, residue removal, controlled solvent or solution application/removal, equipment surface preparation, and general cleaning in ISO Class 3–8 controlled environments where ESD-sensitive workflows are part of the operating method.
TekniClean Pro® ESD Polyester Knit Wiper — 9" x 9" Sealed Border (ISO Class 3–8) | SOSCleanroom Standard Specification
The Teknipure TekniClean Pro® ESD 9" x 9" wiper in an ESD Static Shield resealable bag (SOS SKU: TC3PB1S-99 BAG) is a dry polyester knit cleanroom wipe built for ESD-sensitive wipe stations where teams must control both surface contamination and static-related process risk. The sealed border helps reduce edge-driven fiber release during wiping, while the polyester knit platform supports low-lint wiping, absorbency, and repeatable handling across critical cleaning workflows.
SOS SOP disclaimer (read before standardizing): ISO classification describes the room air, not the product. Final suitability depends on your surface criticality, residue sensitivity, ESD control plan, and validated wiping method. Always follow your facility SOP for material introduction, folding/face rotation, wetness targets, and change-out triggers. In ESD areas, consumables support your program but do not replace grounding controls.
Specifications:
- Manufacturer / Series: Teknipure – TekniClean Pro® (ESD)
- Manufacturer Part Number: TC3PB1S-99
- SOS SKU: TC3PB1S-99 BAG
- Size: 9" x 9" (23 cm x 23 cm) nominal
- Material / Construction: Polyester knit dry wipe
- Edge Construction: Sealed border for perimeter fiber-control intent
- Packaging (bag): 100 wipers in ESD Static Shield resealable bag
- Packaging (case): 10 bags of 100 wipers (1,000 wipers/case)
- Cleanroom environment positioning: commonly used in ISO Class 3–8 controlled environments (confirm to SOP)
- Shelf life: Dry, non-sterile: 5 years from date of manufacture
- Availability: 7–10 business days
Where This Wiper Fits in ISO Cleanrooms (and Why)
ISO cleanroom classification is based on airborne particle concentration, but many contamination issues originate on surfaces. Benches, carts, tools, fixtures, and equipment exteriors accumulate particles and films that transfer during handling and become secondary contamination sources. A disciplined wipe program reduces those reservoirs and helps stabilize operating conditions across shifts.
In ESD-sensitive areas, wiping introduces an additional consideration: triboelectric charging can increase the chance of particle re-attraction and raise static-related handling risk. TekniClean Pro® ESD is often selected when teams want the repeatable wiping behavior of polyester knit together with a sealed-border design intended to reduce edge shedding under routine wiping pressure.
Typical program fit: routine wipe-downs, residue removal, and controlled solvent or solution application/removal in ISO Class 3–8 environments where static control is part of the operational method.
Reality check: many “wiper problems” are technique problems — inconsistent wetness, re-wiping with a loaded face, backtracking into cleaner zones, or leaving resealable bags open. Lock the method before changing materials.
Competitive Comparison:
| Performance Category |
TekniClean Pro ESD 9"x9" (Sealed Border) |
Contec Polyester ESD (Comparable) |
Berkshire ESD Polyester (Comparable) |
| Polyester knit substrate |
Yes |
Yes (model dependent) |
Yes (model dependent) |
| Edge strategy to reduce shedding |
Sealed border |
Sealed edge/border options (varies) |
Sealed edge/border options (varies) |
| ISO program fit |
ISO 3–8 positioning |
Model dependent |
Model dependent |
| ESD-oriented use |
Yes |
Yes |
Yes |
| Packaging discipline |
ESD Static Shield resealable bag |
Varies by SKU |
Varies by SKU |
Comparison note: Equivalent performance depends on the exact SKU, construction method, cleanliness level, ESD requirements, and packaging configuration. Confirm against current manufacturer documentation and your internal acceptance criteria.
About the Manufacturer:
Teknipure develops and manufactures contamination-control consumables for critical and controlled environments, including cleanroom wipers, swabs, and mops used in semiconductor, electronics, pharmaceutical, medical device, aerospace, and precision manufacturing applications.
SOSCleanroom supports standardization with configuration control, continuity of supply, and practical wipe-program guidance aligned to real wipe station workflows.
Key Features:
- Polyester knit platform for low-lint, absorbent cleanroom wiping
- Sealed border to help reduce edge-driven fiber release
- ESD Static Shield resealable bag for controlled dispensing and storage
- Designed for ESD-sensitive wipe stations and critical cleaning workflows
- Good chemical compatibility typical of polyester knit wipes (verify to your chemistry and SOP)
Operational Benefits:
- Better ESD workflow support: built for wipe stations where static control is part of the process method
- Cleaner perimeter behavior: sealed borders help reduce fraying compared with unsealed edges
- Repeatable handling: polyester knit supports consistent wipe behavior during solvent and dry wiping tasks
- Controlled storage: resealable ESD packaging reduces unnecessary exposure between uses
Common Applications:
- ESD-sensitive wipe stations in semiconductor and electronics manufacturing
- Routine wipe-downs of benches, carts, tools, fixtures, and equipment exteriors
- Residue removal and surface preparation in controlled environments
- Applying and removing solvents or process solutions per SOP
- General cleanroom wiping where static-related handling risk must be considered
Best-Practice Use:
- Open → dispense → reseal: use the resealable bag as a contamination-control point; do not leave packs open.
- Fold for control: fold into quarters or eighths and rotate wipe faces instead of re-wiping with a loaded surface.
- Wipe pattern: use straight-line strokes with consistent pressure; avoid circular scrubbing that can redistribute contamination.
- Wetness control: when using solvents, target a controlled damp-film rather than an over-saturated wipe.
- Change-out triggers: replace when loaded, tacky, or when visible film or streaking appears.
- ESD discipline: maintain grounding compliance at the wrist, footwear, mat, and work-surface level; consumables support the system.
Selection Notes (ESD Polyester Knit Wipers)
- 9" x 9" vs. 12" x 12": choose 9" x 9" for tighter work areas, smaller fixtures, and controlled wipe-face rotation.
- Sealed border vs. sealed edge: sealed-border constructions are often selected when edge shedding is a known contributor under wiping pressure or abrasion.
- Dry vs. pre-wetted: if your SOP requires fixed solvent loading, consider validated pre-wetted wipes when available and approved.
Other Similar Products Available From SOSCleanroom.com
Related Teknipure ESD Wipers (same wipe-station intent)
Recommended Glove Pairings (ESD) for ISO 3–5 Wipe Stations
In ESD-sensitive wiping operations, gloves and wipers function as a system. Pair this polyester knit ESD wiper with a cleanroom-processed, powder-free ESD nitrile glove aligned to ISO 3–5 contamination sensitivity and your facility ESD program. Using a cleanroom-grade wipe with a non-cleanroom glove often cancels out contamination-control gains.
Glove discipline (what keeps wipe stations stable):
- Change gloves after contacting non-controlled surfaces such as handles, doors, or keyboards to help prevent recontamination.
- Replace gloves when torn, contaminated, solvent-wet, or when drag increases during wiping.
- Maintain grounding compliance per your ESD program — consumables support the system.
SOS's SOP disclaimer: ESD outcomes are system-dependent. Validate glove and wiper pairing to your ESD control plan and cleanliness acceptance limits.
Notes: Want deeper process guidance and manufacturer-typical performance values? Open the SOSCleanroom Technical Vault tab for method controls, ESD workflow notes, and documentation expectations teams typically review when standardizing ESD polyester knit wipes.
SOSCleanroom supports contamination-control programs with responsive technical support, configuration control, and cleanroom consumables matched to real wipe station workflows.
Product page updated: Mar. 7, 2026 (SOS Technical Staff)
© 2026 Specialty Optical Systems, Inc. (dba SOSCleanroom) All rights reserved.
Technical Summary
by SOSCleanroom
This technical overview is structured for documentation-forward cleanroom programs and process-facing contamination control evaluation.
Polyester Knit Wiping Performance: Polyester knit wipers are commonly selected where teams need low-lint wiping, good absorbency, and dependable compatibility with many cleanroom solvents and process solutions. The knit structure provides repeatable wipe behavior and reliable surface contact across benches, carts, fixtures, tools, and equipment exteriors where controlled contaminant removal matters.
Sealed Border Technology: The sealed border is intended to reduce edge-driven particle and fiber release during routine wiping and abrasion. By stabilizing the wipe perimeter, this construction helps control one of the most common failure points in surface-cleaning workflows: loose fibers originating from the wipe edge under pressure or repeated passes.
Electrostatic Discharge Considerations: In static-sensitive operations, wiping can generate triboelectric charge and increase the chance of particle re-attraction or handling risk. An ESD-oriented wipe platform and ESD protective packaging help support controlled handling, but final performance depends on the total ESD control system, including grounding, work surfaces, humidity, operator practices, and SOP discipline.
Controlled Environment Applications: TekniClean Pro ESD polyester knit wipes are commonly used in semiconductor, electronics, pharmaceutical, medical device, optical, and precision manufacturing environments where both surface cleanliness and static-aware handling practices are part of the operating method.
The Technical Vault
By SOSCleanroom
ISO Surface Control
ESD-Sensitive Workflows
Polyester Knit
Sealed Border
ESD Static Shield Bag
Lot / SKU Control
TekniClean Pro® ESD 9" x 9" sealed border: what this wipe is designed to control
TekniClean Pro® ESD Polyester Knit Wiper in an ESD Static Shield resealable bag (SOS SKU: TC3PB1S-99 BAG) is positioned for critical wipe stations where teams need repeatable polyester-knit wiping performance together with a perimeter-control strategy intended to reduce edge-driven particle and fiber release. In static-sensitive workflows, it is used where both surface cleanliness and electrostatic discipline are part of the process method.
SOS SOP disclaimer (control beats product swaps):
Most failures in wiping programs come from uncontrolled technique — inconsistent wetness, re-wiping with a loaded face, backtracking into clean zones, or leaving resealable bags open. Lock down your method (fold pattern, stroke count, wetness target, change-out triggers) before changing consumables.
Specifications (SKU controls for RFQs, SOPs, and receiving)
- Product: Teknipure TekniClean Pro® ESD Polyester Knit Wiper, Sealed Border
- SOS SKU: TC3PB1S-99 BAG
- Manufacturer part #: TC3PB1S-99
- Size: 9" x 9" (23 cm x 23 cm) nominal
- Material / structure: 100% polyester knit dry wipe
- Edge construction: Sealed border
- Packaging (bag): 100 wipers in ESD Static Shield resealable bag
- Packaging (case): 10 bags/case (1,000 wipers/case)
- Cleanroom positioning: ISO Class 2–7 on manufacturer platform; confirm fit to your SOP and critical surfaces
- Shelf life (dry, non-sterile): 5 years from date of manufacture
Receiving control tip: If this wipe is referenced in a controlled method, verify exact part number, bag/case pack, and that the ESD Static Shield resealable bag configuration matches your approved SOP language.
Where this wipe is commonly used
- Wiping and cleaning surfaces and parts in cleanroom environments
- Disinfectant residue removal
- Applying and removing solvents and solutions, including disinfectants, lubricants, and adhesives
- Semiconductor and electronics manufacturing
- Pharmaceutical cleanrooms and medical device production
- Optical component cleaning and precision engineering
- Laboratories and academia
Best-practice use (ESD-sensitive wipe stations)
- Control introduction: remove outer packaging per SOP and stage wipes in the correct zone.
- Open → dispense → reseal: resealable ESD bag is part of your control plan — do not leave it open.
- Fold for clean faces: use one face per pass and refold to a new face to avoid redeposit.
- Wetness control: target a controlled damp-film when using solvents rather than an over-saturated wipe.
- Stroke discipline: use straight-line strokes and consistent pressure; avoid circular scrubbing.
- Change-out triggers: replace when loaded, tacky, or when visible film begins to develop.
- ESD discipline: maintain grounding compliance at the straps, footwear, mats, and work-surface level.
Misuse controls & when to select a different wipe
- If sterility is required: do not substitute a non-sterile wipe.
- If the surface is extremely finish-sensitive: validate on your exact coating or finish with your chemistry and method.
- If your SOP requires fixed solvent loading: consider validated pre-wetted wipes when available and approved.
- If your process has tighter ESD limits: validate the full glove + wipe + grounding system, not the wipe alone.
SOS SOP disclaimer: ISO class is not a product spec. Your process sensitivity, cleanliness acceptance limits, and ESD control plan decide whether this wipe is appropriate.
Recommended glove pairing (ESD-aligned)
In ESD-sensitive wiping, gloves and wipes operate as a system. Pair this wipe with a cleanroom-processed ESD glove aligned to your contamination sensitivity and grounding program.
Manufacturer documentation (authoritative references)
If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574.
OR check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try! THIS IS NEW FOR 2026!
© 2026 SOSCleanroom. All rights reserved.
