Product Summary
by SOSCleanroom
The TekniClean Pro® Presat ESD Polyester Knit Wiper, Sealed Border, 100% IPA, 9" x 9" is a pre-wetted cleanroom wiper designed for static-sensitive wipe stations and controlled environments where both contamination control and solvent consistency matter. Designed for process-facing surfaces that require repeatable wetness, low-lint wiping, and dependable surface preparation, this presaturated wipe combines a polyester knit substrate with a controlled 100% IPA loading.
Constructed from polyester knit material and finished with a sealed border, the wipe is intended to reduce edge-driven fiber release during wiping and abrasion while supporting strong particle pickup and effective surface cleaning. Because the wipe arrives pre-wetted, it helps reduce operator variability compared with manually sprayed wipes, which can improve wipe-station discipline and make wetness targets easier to standardize.
The ESD-oriented platform makes this wipe well suited for electronics, semiconductor, optical, medical device, pharmaceutical, and other static-sensitive operations where triboelectric charging and inconsistent solvent application can both become process risks. For teams implementing documentation-forward contamination control programs, TekniClean Pro Presat ESD offers a practical balance of polyester durability, controlled solvent loading, absorbency, and repeatable handling.
Typical applications include wipe-downs, residue removal, controlled solvent application and removal, equipment surface preparation, and general cleaning in ISO Class 2–7 controlled environments where ESD-sensitive workflows are part of the operating method.
TekniClean Pro® Presat ESD Polyester Knit Wiper — 100% IPA, 9" x 9" Sealed Border (ISO Class 2–7) | SOSCleanroom Standard Specification
The Teknipure TekniClean Pro® Presat ESD 9" x 9" wiper (SOS SKU: TS3PBI100S-99 BAG) is a pre-wetted polyester knit cleanroom wipe engineered for ESD-sensitive wipe stations where teams must control both surface contamination and solvent consistency. Pre-saturated with 100% IPA, the wipe supports repeatable wetness control and fast evaporation, while the sealed border helps reduce edge-driven fiber release during wiping.
SOS SOP disclaimer (read before standardizing): ISO classification describes the room air, not the product. Final suitability depends on your surface criticality, residue sensitivity, ESD control plan, contact time requirements, and validated wiping method. Always follow your facility SOP for material introduction, folding/face rotation, wetness targets, and change-out triggers. In ESD areas, consumables support your program but do not replace grounding controls.
Specifications:
- Manufacturer / Series: Teknipure – TekniClean Pro® Presat ESD
- Manufacturer Part Number: TS3PBI100S-99
- SOS SKU: TS3PBI100S-99 BAG
- Size: 9" x 9" (23 cm x 23 cm) nominal
- Construction: Polyester knit wipe
- Edge / Border: Sealed border (edge control intent)
- Saturation: 100% IPA (pre-saturated)
- Packaging (bag): 100 wipers in ESD Static Shield resealable bag
- Packaging (case): 5 bags of 100 wipers (500 wipers/case)
- Product Type: Non-sterile presaturated cleanroom wipe
- Cleanroom environment positioning: commonly used in ISO Class 2–7 controlled environments (confirm to SOP)
- Availability: 7–10 business days
Where This Wiper Fits in ISO Cleanrooms (and Why)
ISO cleanroom classification is based on airborne particle concentration, but many yield and quality problems start on surfaces. Benches, carts, fixtures, tools, equipment exteriors, and staging areas collect particles and films that transfer by touch. A disciplined wipe program reduces those reservoirs and helps stabilize conditions across shifts.
In ESD-sensitive areas, static adds another failure mechanism: charged surfaces can attract particles back onto cleaned areas, and uncontrolled discharge can create risk during device handling. TekniClean Pro Presat ESD products are used when teams need repeatable solvent delivery, edge control, and a wipe platform aligned to ESD wipe-station discipline.
Typical program fit: wipe-downs, residue removal, and controlled solvent application and removal across ISO Class 2–7 environments where method repeatability and ESD handling discipline are part of the operations control program.
Reality check: many “wiper problems” are technique problems — over-wetting, re-wiping with a loaded face, backtracking into clean zones, or leaving resealable packaging open. Lock the method before changing materials.
Competitive Comparison:
| Performance Category |
TekniClean Pro Presat ESD 9x9 |
Contec Presat (Comparable) |
Berkshire Presat (Comparable) |
| Polyester knit substrate |
Yes |
Yes (model dependent) |
Yes (model dependent) |
| Sealed border / edge control intent |
Yes (sealed border) |
Available (varies by SKU) |
Available (varies by SKU) |
| Presaturated solvent delivery |
Yes (100% IPA) |
Model dependent |
Model dependent |
| Controlled packaging for wipe stations |
ESD Static Shield resealable bag |
Available on select offerings |
Available on select offerings |
Comparison note: Equivalent performance depends on the exact SKU, solvent system, packaging configuration, cleanliness level, and your internal acceptance criteria.
About the Manufacturer:
Teknipure develops contamination-control consumables for critical and controlled environments, including cleanroom wipers, swabs, and mops. TekniClean Pro platforms focus on repeatable surface cleaning, sealed-border edge control, and packaging intended to support wipe-station discipline and lot traceability.
SOSCleanroom supports standardization with configuration control, continuity of supply, and practical wipe-program support aligned to real cleanroom workflows.
Key Features:
- Polyester knit substrate for repeatable wipe behavior and controlled pickup
- Pre-saturated with 100% IPA to reduce operator variability versus manual spraying
- Sealed border to reduce edge fray and edge-driven fiber release (process-dependent)
- Packaging designed to support wipe station discipline (open → dispense → reseal)
- Commonly used in ISO Class 2–7 controlled environments (confirm to SOP)
Operational Benefits:
- Repeatable wetness: controlled presaturation supports consistent damp-film wiping (method-dependent)
- Reduced edge failure modes: sealed border helps minimize fray compared to cut-edge wipes (process-dependent)
- Fast-drying solvent step: 100% IPA is commonly chosen for quick evaporation and low water-content workflows (validate to SOP)
- Wipe station stability: packaging discipline reduces exposure compared to open stacks or loose wipes
Common Applications:
- ESD-sensitive wipe stations in semiconductor and electronics manufacturing
- Routine wipe-downs of benches, carts, tools, fixtures, and equipment exteriors
- Residue removal and final wipe-down steps where quick evaporation matters
- Applying and removing solvents or process solutions per SOP
- General cleanroom wiping where static-related handling risk and wetness consistency must be considered
Best-Practice Use:
- Use one face per pass: fold and rotate wipe faces instead of re-wiping with a loaded surface.
- Control contact time: match wipe method and dwell expectations to your SOP and chemistry requirements.
- Wipe pattern: use straight-line strokes with consistent pressure; avoid circular scrubbing that can redistribute contamination.
- Do not overwork a drying wipe: replace once effective wetness drops below your process target.
- Change-out triggers: replace when loaded, drying out, tacky, or when visible film or streaking appears.
- ESD discipline: maintain grounding compliance at the wrist, footwear, mat, and work-surface level; consumables support the system.
Notes: Want deeper process guidance and manufacturer-typical platform details? Open the SOSCleanroom Technical Vault tab for method controls, ESD workflow notes, and documentation expectations teams typically review when standardizing presaturated ESD polyester knit wipes.
SOSCleanroom supports contamination-control programs with responsive technical support, configuration control, and cleanroom consumables matched to real wipe station workflows.
Product page updated: Mar. 9, 2026 (SOS Technical Staff)
© 2026 Specialty Optical Systems, Inc. (dba SOSCleanroom) All rights reserved.
Technical Summary
by SOSCleanroom
This technical overview is structured for documentation-forward cleanroom programs and process-facing contamination control evaluation.
Polyester Knit Wiping Performance: TekniClean Pro Presat sealed-border wipers are positioned on Teknipure’s platform as cleanroom-made polyester knit wipes with sealed borders for critical environments that demand low-linting, low-shedding, and highly effective wiping solutions. The knit structure supports repeatable wipe behavior and dependable surface contact across benches, tools, fixtures, and equipment exteriors.
Sealed Border Technology: The sealed border is intended to significantly reduce particles and fibers from the wipe edges. By stabilizing the wipe perimeter, this construction helps control one of the most common failure points in surface-cleaning workflows: loose fibers originating from the wipe edge under pressure or repeated passes.
Presaturated 100% IPA System: This format is positioned for controlled-environment wipe-down steps where teams need repeatable solvent delivery, edge control, and a wipe format aligned to ESD-sensitive handling. Presaturated 100% IPA can help reduce spray variability, over-wetting, and inconsistent damp-film behavior when compared with manually wetted wipes.
Controlled Environment Applications: SOS positions this SKU for wipe-downs, residue removal, and controlled solvent application and removal across ISO Class 2–7 environments where method repeatability and ESD handling discipline are part of the operations control program.
The Technical Vault
By SOSCleanroom
ISO Surface Control
Presaturated 100% IPA
Polyester Knit
Sealed Border
ESD Wipe Station Discipline
Lot / SKU Control
TekniClean Pro® Presat ESD 100% IPA 9" x 9": what this sealed-border presaturated wipe is engineered to do
TekniClean Pro® Presat ESD (Part #: TS3PBI100S-99) is designed for controlled-environment wipe-down steps where teams need repeatable solvent delivery, edge control, and a wipe format aligned to ESD-sensitive handling. The polyester knit substrate supports consistent wipe behavior, while the sealed border helps reduce edge fray and loose fibers that can show up as “mystery fibers” on benches, tooling, and finish-critical parts.
SOS SOP disclaimer (control beats product swaps): Most failures in wiping programs come from uncontrolled technique — inconsistent wetness, re-wiping with a loaded face, backtracking into clean zones, or leaving packaging open. Lock your method (fold pattern, stroke count, wetness target, change-out triggers) before changing consumables.
Specifications (SKU controls for RFQs, SOPs, and receiving)
- Product: Teknipure TekniClean Pro® Presat ESD Polyester Knit Wiper, Sealed Border
- Manufacturer part #: TS3PBI100S-99
- SOS SKU: TS3PBI100S-99 BAG
- Size: 9" x 9" (23 cm x 23 cm) nominal
- Substrate: polyester knit
- Border: sealed border (edge control intent)
- Saturation: 100% IPA (presaturated)
- Packaging: 100 wipes per bag
- Case quantity: 5 bags/case (500 wipes/case)
- Bag type: ESD Static Shield resealable bag
- Cleanroom positioning: ISO Class 2–7 (confirm to SOP and acceptance limits)
Receiving control tip: If this wipe is referenced in a controlled method, verify exact part number, solvent concentration, bag/case pack, and that the ESD resealable format matches your approved SOP language.
Best-practice use (ESD-sensitive presaturated wipe stations)
- Control introduction: remove outer packaging per SOP and stage wipes in the correct zone.
- Open → dispense → reseal: resealable packaging is part of your control plan — do not leave it open.
- Fold for clean faces: use one face per pass; refold to a new face to avoid redeposit.
- Wetness control: use the wipe while it still meets the damp-film target for your process.
- Stroke discipline: straight-line strokes, consistent pressure, clean-to-less-clean flow; avoid circular scrubbing.
- ESD discipline: maintain grounding compliance (straps, footwear, mats). Consumables support the system but do not replace it.
Misuse controls & when to select a different wipe
- If sterility is required: do not substitute a non-sterile presaturated wipe.
- If your process is sensitive to aggressive solvent exposure: validate 100% IPA against your surface, coating, adhesive, and contact-time limits.
- If your SOP calls for a different solvent ratio: do not substitute 100% IPA without approval.
- If your process has tighter ESD or residue limits: validate the full glove + wipe + grounding system and current manufacturer documentation, not the wipe alone.
SOS SOP disclaimer: ISO class is not a product spec. Your process sensitivity, chemistry requirements, and acceptance limits decide whether this wipe is appropriate.
Manufacturer documentation (authoritative references)
If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574.
OR check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try! THIS IS NEW FOR 2026!
© 2026 SOSCleanroom. All rights reserved.
