Skip to main content
Kimberly-Clark Kimtech (06070) PURE W4 Presat 9" x 11" Wipes

Kimberly-Clark Kimtech (06070) PURE W4 Presat 9" x 11" Wipes

$130.00
(No reviews yet)
SKU:
06070
Availability:
Stock Item
Shipping:
Calculated at Checkout
Quantity Option (Case):
10 Packs of 40 Wipes (400 Wipes Total)
Kimtech™ 06070 PURE W4 PreSat Alcohol Wipes — 9" x 11"
One-step surface wiping with a controlled 70% IPA / 30% DI water saturation on a low-lint polypropylene substrate.
PreSat 70% IPA / 30% DI 100% Polypropylene ISO Class 4+ Use Resealable Pouch
What it is: Kimtech™ PURE W4 PreSat wipes (06070) are cleanroom-oriented, low-lint wipes made from a 100% polypropylene base sheet and delivered ready-to-use in a resealable pouch. Each wipe is pre-saturated with a 70% isopropyl alcohol / 30% deionized water solution to support fast, consistent wipe-downs of critical surfaces.
Why teams choose it: pre-saturation removes mixing variability, reduces open-container solvent exposure, and standardizes wetting so operators can focus on technique (coverage, directionality, and contact time) instead of bottle control.
Quick Specs
SKU: 06070
Wipe size: 9" x 11"
Substrate: 100% polypropylene (low lint)
Solution: 70% IPA / 30% DI water (semiconductor grade alcohol)
Packaging: 40 wipes per pack; 10 packs per case (400 wipes total)
Recommended environments: ISO Class 4 and higher
When “Wet Enough” Must Be Repeatable: How Pre-Saturated IPA Wipes Improve Coverage Consistency on Critical Surfaces
The Technical Vault By SOSCleanroom
Kimtech™ PURE W4 06070 • 9" x 11" 70% IPA / 30% DI 100% Polypropylene ISO Class 4+ Use
1) The process problem: variable wetting = variable results
In controlled environments, two operators can “wipe the same way” but leave different outcomes if the wipe is under-wet (poor soil pickup, streaking, uneven film) or over-wet (drips, pooling, longer dry-down, and re-deposition risk). Pre-saturated wipes reduce that variability by standardizing solvent loading per wipe and keeping the remaining inventory protected inside a resealable pouch.
2) Why this construction is used in cleanrooms
Substrate (100% polypropylene): selected for low-lint performance and broad solvent compatibility for routine wipe-down tasks.

Solution (70% IPA / 30% DI water): a widely adopted cleaning blend that supports fast evaporation while keeping enough aqueous fraction to help mobilize certain residues and improve wipe wetting across surfaces.
3) Technique that protects your surface (and your wipe)
A. Fold for control: fold into quarters to create a flat, stable wiping face. Maintain a single wiping face until it loads, then refold to a clean face.
B. Wipe directionally: use single-pass, overlapping strokes (e.g., “S-stroke” or straight-line) to move contamination away from the cleaned area—avoid circular wiping.
C. Keep it in contact: apply consistent, moderate pressure to maintain full-surface contact without forcing drips from the wipe.
D. Do not re-dip: once a wipe leaves the pouch and is used, discard it—re-wetting introduces uncontrolled variables and cross-contamination risk.
4) Where Kimtech 06070 fits best
Recommended for ISO Class 4 and higher cleanroom environments where teams need a ready-to-use IPA wipe for benches, carts, tools, non-porous equipment surfaces, and routine wipe-down steps in high-tech, biotech, medical device, and pharmaceutical workflows.
5) Safety and handling notes (read before deployment)
Flammability: IPA solutions are flammable—keep away from heat, sparks, and ignition sources; follow your facility’s solvent and EHS procedures.
Keep pouch sealed: reseal immediately after removing wipes to control evaporation and preserve saturation consistency.
Dispose properly: treat used wipes as solvent-contaminated waste per site policy.
Pack-out (ordering clarity)
Case configuration: 10 packs × 40 wipes (400 wipes per case) • Wipe size: 9" x 11" • Color: White