Texwipe TX8270 Sterile 70% Isopropanol (IPA) Solution — 8 oz Trigger Spray (12/Case)

Texwipe TX8270 is a sterile, ready-to-use 70% isopropanol (IPA / isopropyl alcohol) and 30% USP-purified water solution packaged in fully assembled 8 fl oz (237 mL) trigger-spray bottles for controlled-environment wipe-downs, pass-through prep, and routine cleaning where consistent wetting, extremely low residue expectations, and lot-level traceability matter. The solution is sub-micron filtered, filled into cleaned containers, double-bagged in solvent-safe packaging, and gamma-irradiated; each bottle is lot coded with an expiration date to simplify recordkeeping and audits.

• Part number: TX8270
• Solution type: 70% Isopropyl Alcohol (IPA)
• Sterile: Yes (gamma irradiated)
• Composition: 70% by volume USP-grade isopropanol + 30% USP-purified water
• Filtration: 0.2 µm filtered (per product listing)
• Container: 8 fl oz (237 mL) trigger spray bottle (fully assembled)
• Case pack: 12 poly bottles per case (8 fluid ounce trigger spray bottles)
• Packaging: Double-bagged in solvent-safe packaging
• Sprayer: Adjustable spray head offers stream delivery or coarse spray (non-atomizing adjustable spray)
• Identification: 5 color indicator dots (for identification)
• Endotoxin guideline: Meets FDA guideline for medical device bacterial endotoxin limit of not more than 20 EU/device
• Traceability: Each bottle is lot coded with expiration date for easy recordkeeping; Certificates of Compliance and Analysis available

TX8270 is produced by ITW Texwipe, a worldwide leader in contamination-control supplies and critical cleaning products for controlled environments. In sterile IPA solutions, Texwipe emphasizes repeatable execution and documentation discipline: controlled filtration, cleaned-container filling, double-bag packaging for controlled entry, gamma irradiation, and lot/expiration coding to support compliance and audit readiness.

In practice, an 8 oz sterile trigger spray is often selected for point-of-use control: predictable wetting without open-container pouring, a spray head designed for stream delivery or coarse spray, and a small bottle that’s easy to stage at benches, carts, and pass-throughs. Pair with compatible low-linting cleanroom wipers (no wiper is truly “zero-lint” in every process condition) and straight-line wipe patterns to reduce re-deposition.

• 0.2 µm filtered 70% USP-grade isopropanol (isopropyl alcohol)
• Non-atomizing adjustable spray
• 5 color indicator dots (for identification)
• Double-bagged in solvent-safe packaging
• Meets FDA guideline for medical device bacterial endotoxin limit of not more than 20 EU/device

• Maintains sterility by design: Ready-to-use sprayer eliminates handling and assembly steps that can introduce contamination.
• Removes many surface contaminants: Commonly used for wipe-down steps and residue removal (process-dependent).
• Extremely low residue expectation: Designed to evaporate and leave extremely low residue on compatible surfaces.
• Pass-through ready: Prefiltered and sterilized for pass-through and use in critical environments.
• Reduces in-house burden: Eliminates mixing, filtration, processing, and QC expense of in-house production of sterile IPA.

• Surface cleaning
• Use on gloved hands in sterile suites (per site SOP)
• Wipe down for pass through to controlled environments
• Ideally suited for use with sterile cleanroom wipers

• Spray onto the wipe for critical work: Wet a compatible low-linting cleanroom wiper first to reduce overspray and airborne droplets.
• Wipe pattern discipline: Use straight-line, overlapping strokes; rotate to a fresh wipe face frequently to avoid re-depositing contamination.
• Stream vs. coarse spray: Use stream delivery for precise application; use coarse spray for broader wetting, then wipe to distribute evenly.
• Compatibility check: Confirm compatibility with plastics, elastomers, coatings, adhesives, and sensitive finishes before broad deployment.
• Change-out triggers: Replace wipes when visibly soiled or when they begin leaving streaks/residue (process-dependent).

• 8 oz vs. 16 oz / 32 oz trigger spray: Choose 8 oz when lighter handling and tight point-of-use control matter; choose 16 oz or 32 oz to reduce change-outs at higher-consumption stations.
• Sterile vs. non-sterile alcohol: Choose sterile when your SOP requires sterile packaging/irradiation documentation for controlled entry and critical environments.
• Trigger spray vs. bulk gallon: Trigger spray supports controlled, repeatable application; bulk formats can be preferred for higher-volume wetting or refill programs (where permitted by SOP).

Sterile 70% Isopropanol (IPA)

• TX3270: Sterile 70% isopropanol trigger spray, 16 fl oz (473 mL), 12 bottles/case
• TX3273: Sterile 70% isopropanol trigger spray, 32 fl oz (946 mL), 12 bottles/case
• TX3290: Sterile 70% isopropanol bulk container, 1 gallon (3.8 L), 4 bottles/case