Skip to main content
Texwipe TX1004 AlphaWipe 4x4 polyester cleanroom wiper bag (front)

Texwipe TX1004 AlphaWipe 4" x 4" Polyester Cleanroom Wiper

$60.61
SKU: TX1004 BAG Stock Item
(No reviews yet)
Availability:
Stock Item
Shipping:
Calculated at Checkout
International Shipping::
Available for this product
Type:
Dry Wiper
Family:
AlphaWipe
Material:
Polyester
Wiper Size:
4" x 4"
Wiper Edge:
Cut Edge
ISO Class:
ISO 4 (Class 10) - ISO 8 (Class 100,000)
Country of Origin::
Made in USA

TX1004 AlphaWipe 4" x 4" 100% Polyester Cleanroom Wiper

Texwipe TX1004 AlphaWipe is a low-linting (no wiper is truly ‘zero-lint’ in every process condition), high-absorbency polyester knit cleanroom wiper designed for precision wiping, controlled solvent application, and localized cleaning tasks in controlled environments. It is constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern to help maintain integrity under wiping force while reducing snagging and fiber release.

Use-positioning note: TX1004 is commonly selected when smaller wipe geometry improves control, reduces redeposition risk, and supports precision work on tools, fixtures, and tight surfaces.

Specifications:
  • Size: 4" x 4" (10 cm x 10 cm) nominal
  • Material: 100% continuous-filament polyester
  • Construction: Double-knit, no-run interlock
  • Edge: Laundered cut edge
  • Packaging: 300 wipers/bag; 10 bags/case
  • Use environments: ISO-class cleanrooms and controlled areas; final suitability depends on surface criticality, chemistry, and SOP
Where TX1004 Fits in ISO Cleanrooms 

Cleanroom classifications under ISO 14644 are based on airborne particle limits, but day-to-day cleanroom performance is strongly influenced by surface cleanliness. Localized contamination on tools, fixtures, ports, and work surfaces can transfer by touch and migrate into more critical zones through routine movement and airflow.

TX1004 is commonly used in ISO-controlled environments when precision matters more than coverage. Its smaller format allows operators to maintain tighter control over wipe-face rotation, solvent loading, and contact area, reducing the likelihood of redeposition or streaking during detailed cleaning tasks.

Typical program fit: TX1004 is widely used across ISO Class 4–8 controlled areas for precision wipe-downs, tool cleaning, and small-surface solvent application. It is often used alongside larger AlphaWipe formats to match wipe size to task risk.

About the Manufacturer:

Texwipe (an ITW company) treats cleanroom wiping as an engineered contamination-control input rather than a commodity consumable. Its manufacturing approach controls fabric selection, knit structure, edge construction, laundering, and packaging to reduce variability and support consistent cleanroom performance.

 

SOSCleanroom supports that manufacturing discipline with continuity of supply, documentation support, and practical application guidance so customers can standardize wiping materials while maintaining audit readiness and operational consistency.

TX1004 Features:
  • 100% continuous-filament polyester knit construction
  • Double-knit, no-run interlock for durability
  • Cleanroom laundered and packaged
  • Solvent-safe packaging
  • Lot-to-lot traceability
TX1004 Benefits:
  • Precision control: Smaller format supports detailed wiping and controlled solvent use
  • Reduced redeposition risk: Limited surface area per wipe helps maintain clean wipe faces
  • Low-linting performance: Designed to help minimize particle and fiber contribution
  • Chemical compatibility: Polyester knit commonly used with IPA and other cleanroom solvents (verify compatibility with your SOP)
Common Applications:
  • Precision cleaning of tools, fixtures, ports, and small components
  • Localized wipe-downs of benches and equipment
  • Applying and removing solvents, disinfectants, and cleaning agents
  • Cleaning corners, edges, and tight geometries
  • Controlled wiping of sensitive surfaces
Best-Practice Use:
  • Use TX1004 when wipe size and control are more critical than coverage
  • Dampen lightly; avoid over-saturating small wipes
  • Fold to create multiple clean faces and rotate after each pass
  • Wipe in straight, overlapping strokes to prevent redeposition
  • Discard when faces are consumed or streaking is observed
Selection Notes
  • TX1004 vs. TX1009: TX1004 is preferred for precision tasks; TX1009 is preferred for larger surface coverage and general wipe stations.
  • Dry vs. pre-wetted: Pre-wetted AlphaSat options can improve consistency where solvent handling variability is a concern.
  • Edge strategy: Laundered cut edge is suitable for many daily tasks; sealed-edge options are used when edge-driven releasables dominate risk.

Link to Texwipe Technical Datasheet: Click Here

Recommended Glove Pairing 

Workflow note: TX1004 is a non-sterile wiper. Always follow facility SOPs for sterile vs. non-sterile material flow.

Product page updated: Jan. 20, 2026 (SOS Technical Staff)

© 2026 SOS Supply. All rights reserved.

The Technical Vault By SOSCleanroom
ISO 14644 Operations Control Polyester Knit (Low-Lint) Small Format (4" x 4") Tight-Space Wipe Control Spill Pickup & Solution Application Lot Traceability
Texwipe TX1004 AlphaWipe® 4" x 4": swab-like control in a low-lint polyester knit wipe

Texwipe TX1004 AlphaWipe® is a 100% continuous-filament polyester cleanroom wiper constructed in a double-knit, no-run interlock pattern and processed as a cleanroom laundered and packaged wipe. The 4" x 4" format is commonly selected when operators want tight-space control for localized cleaning steps, small components, fixtures, and precision wipe-downs—without the bulk of a 9" x 9" wiper.

Operations takeaway: TX1004 is most effective when it is treated as part of your ISO 14644 operations control program—defined wipe technique, defined wetness (damp-film vs. wet), defined change-out triggers, and controlled introduction/storage so wipes do not become a contamination source.

ISO-first context: why small-format wipes can improve method control

ISO 14644-5:2025 frames cleanroom performance around a documented Operations Control Programme (OCP) governing cleaning methods, materials, and handling. Small-format wipes support operations control when they help standardize contact area, pressure, and stroke length for localized cleaning steps. The advantage is realized only when operators avoid over-wetting and re-wiping with a loaded face.

Control point: Most “wiper failures” are technique failures—over-wetting, backtracking into clean areas, re-wiping with a loaded face, or using a wiper beyond its change-out point.

Specifications (SKU controls for RFQs, SOPs, and receiving)
  • Product: Texwipe AlphaWipe® TX1004
  • Size: 4" x 4" nominal (10 cm x 10 cm)
  • Material / structure: 100% continuous-filament polyester; double-knit, no-run interlock pattern
  • Edge construction: Laundered cut edge (cut-edge knit processed for cleanroom use)
  • Processing: Cleanroom laundered and packaged; solvent-safe packaging; lot traceability
  • Typical ISO positioning: ISO Class 4–8 (process dependent; confirm for your method)
  • Packaging: Verify current bag/case counts and inner-pack configuration per current manufacturer documentation

Documentation rule: For controlled/validated programs, base acceptance criteria on the current manufacturer datasheet revision and lot records (not web summaries).

What TX1004 is designed to do (typical use cases)
  • Localized wiping of tools, fixtures, small parts, and tight clearances in controlled environments
  • Spill pickup and small-area cleanup where a compact wipe reduces spread
  • Applying/removing cleaning solutions with controlled damp-film wetness (when specified by the SOP)
  • Wiping around edges, fasteners, ports, and corners where a 9" x 9" wipe reduces control
  • General bench wiping when operators need smaller, repeatable contact area and stroke length

Selection tip: Small wipes reduce waste and increase control in precision steps, but only if the method defines fold pattern, stroke count, and change-out point.

Best-practice use (reduce residues, particles, and rework)
  1. Control introduction: bring wipes into the cleanroom per your OCP rules (outer packaging removal, staging, and storage).
  2. Fold for control: create multiple clean faces; use one face per pass, then refold—do not re-wipe with a loaded face.
  3. Damp-film technique: wet to a controlled damp state (not dripping). Over-wetting drives streaking/tide marks and redeposit.
  4. Straight-line strokes: use unidirectional passes with consistent pressure; avoid circular scrubbing.
  5. Clean-to-less-clean flow: in zoned areas, wipe from the cleanest zone to the dirtiest zone; do not backtrack.
  6. Dispose correctly: discard used wipes immediately into the designated waste stream; do not stage used wipes on benches/carts.

Method standardization tip: If outcomes differ by operator, lock four variables in the SOP: wetness target, stroke count, fold pattern, and change-out point.

Misuse controls & when not to use TX1004
  • If sterility is required: do not substitute a non-sterile wipe. Use the sterile wipe required by your workflow and transfer rules.
  • If ultra-low residues are gating: confirm NVR/ionic requirements against the current datasheet and your internal limits.
  • If the surface is easily scratched: validate on delicate finishes; use a low-risk validated method and avoid excessive pressure.
  • If aggressive chemistry is used: verify compatibility for your solvents/cleaners; do not assume universal compatibility.
Recommended cleanroom glove pairing (ISO-aligned)

For ISO-controlled wiping applications, pair this Texwipe cleanroom wiper with a cleanroom-processed, low-particle nitrile glove that matches the contamination sensitivity of the wipe and the environment.

Why this matters: Wipers and gloves function as a system. Using a cleanroom-grade wipe with a non-cleanroom glove introduces particles, fibers, and ionic contamination that can negate the benefit of low-lint polyester construction and controlled wiping methods.

Glove discipline: Change gloves when contaminated, solvent-wet, torn, or after contacting non-controlled surfaces. Treat gloves as a primary contamination vector during wiping operations.

Why buy ITW Texwipe AlphaWipe® TX1004 from SOSCleanroom
  • Configuration control: TX1004 is often standardized for small-format wiping; buying by exact SKU reduces unintended substitutions.
  • Audit readiness support: We help customers locate current manufacturer documentation aligned to receiving controls and traceability expectations.
  • One-cart procurement: Pair AlphaWipe® with cleanroom gloves, swabs, solvents/IPA, and facility consumables so your method stays consistent.
Manufacturer documentation (authoritative references)
  • SOSCleanroom TX1004 product page: Click Here
  • AlphaWipe® Dry Wipers datasheet (SOS hosted PDF): Click Here
  • ISO 14644-5:2025 operations standard overview (ISO listing): Click Here
If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574. OR check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try! THIS IS NEW FOR 2026! © 2026 SOSCleanroom. All rights reserved.