TX3225 Sterile TexTra10 12" x 12" Polyester Cleanroom Wiper

TX3225 Sterile TexTra10 is a low-linting (no wiper is truly ‘zero-lint’ in every process condition), high-absorbency, sealed-border polyester knit wiper engineered for sterile and aseptic cleaning workflows. It is a single-ply, double-knit, 100% continuous-filament polyester wiper designed to deliver two-ply-like liquid capacity while helping reduce particle and fiber release at the edges through thermally sealed borders. Each case is gamma irradiated to a Sterility Assurance Level (SAL) of 10-6 in accordance with ANSI/AAMI/ISO 11137.

• Size: 12" x 12" (31 cm x 31 cm) nominal
• Material: 100% continuous-filament polyester
• Construction: Single-ply, double-knit (high-capacity absorption vs. typical single-ply)
• Edge: Sealed border (thermally sealed)
• Sterility: Gamma irradiated to SAL 10-6; expiration date marked on each package
• Packaging: 100 wipers/bag (5 inner bags of 20); 5 bags/case (500 wipers/case); double-bagged in solvent-safe bags; header strip protects remaining wipers after opening
• Use environments: Commonly specified for sterile ISO Class 3-5 environments (and used across broader ISO 3-8 controlled areas depending on your process and cleaning method)

Texwipe (an ITW company) differentiates itself in cleanroom wiping by treating the wiper as an engineered product, not a commodity consumable. Its manufacturing approach starts with fabric and yarn selection (often continuous-filament polyester for lower shedding), then controls edge construction (cut-edge, sealed-edge, and patented sealed-border options), controlled cleaning/laundering, and packaging aligned to cleanroom application tiers.

Texwipe also emphasizes verification through fibers/particles/ions/residue/endotoxin testing and describes automation-forward processes—such as Vectra® continuous cleaning with 100% machine-vision inspection and hands-free sterile manufacturing steps—to improve lot-to-lot consistency and reduce handling-driven contamination risk. SOSCleanroom (SOS) supports that manufacturing discipline with a close working relationship with Texwipe focused on continuity of supply, clean documentation handoff (certs, lot traceability), and practical application support—so customers can standardize wiping materials with predictable performance while maintaining procurement reliability and audit readiness.

• Cleanroom-laundered 100% polyester knit with thermally sealed borders
• Absorbency of a two-ply wiper (in a single-ply format)
• Good abrasion resistance
• Gamma irradiated to a Sterility Assurance Level of 10-6
• Double-bagged in solvent-safe bags
• Header strip protects wipers that remain in bag after opening
• Lot-specific information attached to each case
• Certificate of Processing confirms radiation dosage
• Certificate of Compliance
• Expiration date marked on each package
• Independent quality control audits for sterility assurance

• Pre-sterilized for aseptic and sterile environments: Supports validated sterile workflows without in-house sterilization steps.
• Reduces prep burden: Helps eliminate the preparation, documentation, and validation overhead associated with autoclaving wipers.
• Built for large-volume wet processing: Large size and liquid capacity simplify application and removal of cleaning and disinfecting solutions.
• Strength on surfaces: Supports rigorous wiping with minimal release of particles and fibers (process-dependent).
• Chemical exposure tolerance: Withstands exposure to many common cleaning/disinfecting solutions (including bleaches, phenols, and quats) when aligned to your SOP and compatibility checks.
• Transfer-friendly packaging: Packaging permits alcohol wipe-down of the exterior bag before introducing the inner bag to sterile environments.
• Lot traceability: Assures quality of individual lots and lot-to-lot traceability for audits and investigations.

• Engineered for high-absorption use in ISO Class 3-5 environments
• Designed for sterile wiping of environmental surfaces and production equipment in aseptic fill areas
• Ideal for applying and removing large volumes of cleaning and disinfecting solutions
• Spill control
• Absorptive work surface

• Bag wipe-down discipline: In sterile workflows, wipe down the exterior bag per site practice before bringing the inner bag into the cleaner zone.
• Use the header strip: After opening, use the header strip to help protect remaining wipers in the bag from incidental contact and splash exposure.
• Fold for control: Fold into quarters to create multiple clean faces; rotate faces instead of re-wiping with a loaded surface.
• Wipe pattern: Use straight-line strokes (top-to-bottom or left-to-right) to reduce re-deposition.
• Wet vs. dry: For disinfectants/solvents, dampen—do not over-saturate—to maintain control and reduce dripping.
• Change-out triggers: Replace the wiper when the face becomes visibly soiled, tacky, or begins to streak.

• TX3225 vs. TX3224: Same Sterile TexTra10 family and sealed-border construction; choose TX3224 when a 9" x 9" format is preferred for smaller work zones and tighter reach.
• TX3225 vs. TX3220: TX3225 is Sterile TexTra10 (sealed border) and is often chosen when edge control and sterile ISO Class 3-5 use is the priority; TX3220 is a different sterile TexTra variant frequently selected for broader sterile wipe-down needs where cut-edge presentation is acceptable.
• TexTra10 vs. Vertex sterile: If you need the highest edge control and premium sterile wipe-down positioning, sealed-edge sterile Vertex wipers are commonly evaluated alongside Sterile TexTra10 (process- and SOP-dependent).

TexTra 10 Dry Wipers

• TX2452: 12" x 12" nominal (31 cm x 31 cm), polyester wipers with thermally sealed borders, 100 wipers/bag

Sterile TexTra 10 Dry Wipers

• TX3224: 9" x 9" nominal (23 cm x 23 cm), polyester wipers with thermally sealed borders, 100 wipers/bag
• TX3225: 12" x 12" nominal (31 cm x 31 cm), polyester wipers with thermally sealed borders, 100 wipers/bag