Skip to main content

18.5"W x 7"H x 13"D - Cleanroom 3-Compartment Dispenser (with Lid)

$234.29
(No reviews yet)
SKU:
BD-03 L (Acrylic)
Availability:
Made to Order, 14 - 21 Business Days
Shipping:
$25.00 (Fixed Shipping Cost)
Quantity Option (Each):
1 Dispenser
18.5" W × 7" H × 13" D Cleanroom 3-Compartment Dispenser with Lid
This low-profile, three-compartment cleanroom dispenser with integrated lid is designed to protect stored consumables from airborne particulate while maintaining organized, point-of-use access. The shallow 7" height allows installation beneath benches or equipment lines, while the deeper 13" profile supports higher-capacity loading without compressing folded wipers, glove inner packaging, or lightweight PPE.

Lidded dispensers are commonly selected for ISO-classified environments where additional protection from passive particle fallout is required between use cycles.

Published configuration
  • Overall size: 18.5" W × 7" H × 13" D
  • Compartments: Three isolated dispensing chambers
  • Lid: Integrated hinged lid for passive contamination protection
  • Profile: Low-height, deep configuration
  • Design intent: Multi-consumable storage with added environmental shielding
  • Construction material: Rigid clear polymer (non-porous, cleanroom-compatible)
  • Mounting: Wall-mounted or shelf placement (hardware dependent)
  • Cleanability: IPA wipe-down compatible per facility SOP
  • Intended environments: ISO Class 4–8; EU GMP Grade B–D (application-dependent)
Why add a lid?
A lidded dispenser helps reduce passive particle deposition on stored consumables during idle periods. This is especially beneficial in gowning rooms and process areas where airflow patterns or personnel movement can contribute to airborne contamination.

Compatible cleanroom consumables 

Use and handling guidance
  • Assign each compartment to a single consumable type or size.
  • Keep the lid closed when the dispenser is not actively in use.
  • Load materials using clean gloves in a controlled environment.
  • Clean lid and exterior surfaces routinely per cleanroom SOP.
Questions? Email Sales@SOSsupply.com or call (214) 340-8574.
© 2026 SOS Supply. All rights reserved.
The Technical Vault Low-Profile Lidded Dispensing for Enhanced Cleanroom Control

Why lids matter in controlled environments
Even in ISO-classified cleanrooms, airborne particles can settle on exposed consumables during idle periods. Lidded dispensers provide a simple, passive barrier that reduces particle fallout without introducing additional handling steps.
Combining low profile with deeper capacity
The low 7" height minimizes interference with airflow and equipment, while the deeper 13" internal geometry allows facilities to stage sufficient consumables for continuous operation without overstocking.
Material construction and cleanroom suitability
  • Rigid clear polymer housing and lid: Non-porous, low-shedding, compatible with IPA wipe-down protocols.
  • Smooth internal surfaces: Reduce abrasion and particle generation during dispensing.
  • Transparent design: Allows inventory checks without opening the lid.
Waste reduction and workflow consistency
Keeping consumables covered reduces accidental disposal due to suspected contamination. Controlled, lidded dispensing supports predictable usage rates and more stable restocking intervals.
Recommended placement
  • Gowning benches and prep areas
  • Process support walls beneath equipment lines
  • ISO zones with elevated airflow or personnel movement
SOSCleanroom technical perspective
Lidded, low-profile dispensers add an extra layer of control without increasing complexity. SOSCleanroom evaluates these systems alongside validated Texwipe, Ansell, and Kimtech consumables to help customers maintain contamination control from storage through point of use.
© 2026 SOS Supply. All rights reserved.