Skip to main content
2 oz. ESD-Safe Flux Dispenser (26 ga.)

2 oz. ESD-Safe Flux Dispenser (26 ga.)

$353.57
(No reviews yet)
SKU:
FD-1-ESD
Availability:
7 - 10 Business Days
Shipping:
Calculated at Checkout
Quantity Option (Case):
50 Flux Dispensers
2 oz ESD-Safe Flux Dispenser with 26 Gauge Precision Tip
This 2 oz ESD-safe flux dispenser with a 26 gauge precision tip is designed for ultra-fine, highly controlled application of flux in electronics assembly, rework, and micro-soldering processes. The 26 ga tip enables extremely precise placement, making it ideal for fine-pitch components and densely populated circuit boards where excess flux must be avoided.

Constructed from static-dissipative materials, the dispenser helps minimize electrostatic charge accumulation during handling and use. Its small-capacity format supports disciplined material control while maintaining immediate access at ESD-protected workstations.
Published configuration
  • Capacity: 2 oz (60 mL)
  • Dispensing method: Needle-style precision tip
  • Tip size: 26 gauge
  • Material: ESD-safe static-dissipative construction
  • Flow control: Ultra-fine, low-volume application
  • Intended environments: ISO Class 3–8 (Class 1–100,000); ESD-sensitive areas
Why 26 gauge flux tips matter
Finer gauge tips deliver significantly smaller volumes of flux per actuation. A 26 ga tip is ideal for microelectronics, fine-pitch solder joints, and applications where residue control and placement accuracy are critical to yield and reliability.
Typical cleanroom applications
  • Fine-pitch and micro-SMT soldering
  • High-density PCB assembly and rework
  • Microelectronics and advanced packaging processes
  • ESD-controlled workstations requiring minimal flux volume
Use and handling guidance
  • Fill dispenser with low- to medium-viscosity flux approved for needle dispensing.
  • Label contents per site SOP (flux type, date, lot).
  • Cap tip immediately after use to prevent clogging or drying.
  • Clean exterior regularly using approved IPA wipe-down procedures.
Questions? Email Sales@SOSsupply.com or call (214) 340-8574.
© 2026 SOS Supply. All rights reserved.
The Technical Vault Flux Dispensers, Fine-Gauge Tips & Precision Control in ESD Environments
Why fine-gauge flux dispensing is critical
As component density increases, flux placement tolerance decreases. Fine-gauge needle dispensers allow operators to apply flux only where required, reducing residue spread, post-solder cleaning, and risk of electrical interference.
26 gauge tip selection considerations
  • Ultra-low flow rate: Ideal for micro-joints and fine-pitch components.
  • High placement accuracy: Supports repeatable application at joint level.
  • Viscosity sensitivity: Best used with lower-viscosity flux formulations.
ESD-safe construction and process consistency
Static-dissipative dispenser materials help prevent electrostatic discharge during handling. Combined with fine-gauge tips, this supports consistent application across operators while protecting sensitive electronic assemblies.
Best-practice placement
  • ESD-protected micro-soldering and rework stations
  • High-density PCB assembly and inspection benches
  • Advanced electronics manufacturing environments
SOSCleanroom technical note
SOSCleanroom offers multiple flux dispenser tip sizes to match application precision and flux viscosity. The 26 gauge dispenser is typically selected for the most demanding fine-pitch applications where minimal flux volume and maximum control are required.
© 2026 SOS Supply. All rights reserved.