TX515A Cleanroom Labels 1.5" Round Autoclave

Autoclave labeling looks simple until it fails in the places that matter: labels lift after steam exposure, ink washes out, or packs cannot be tied back to a load record. TX515A is designed for cleanroom and lab programs that need legible, durable identification through steam sterilization without introducing high-shedding stationery into controlled areas.

The biggest performance gain is standardization. When every team uses the same label stock, writing method, and placement rules, you reduce “mystery packs,” speed up post-cycle release checks, and tighten traceability across shifts.

• Labeling wrapped packs, trays, tools, and containers intended for steam autoclave processing
• Maintaining readable identification (date/load/operator/contents) through steam exposure
• Cleanroom-compatible labeling where low outgassing and controlled packaging are part of the selection criteria
• Programs that print or write on labels and need predictable adhesion and legibility post-cycle

• Autoclave durability: Label stock is designed to prevent the removal of written data during the autoclave process.
• Material choice: Teslin® label stock with matte finish supports printing and writing readability (per TDS).
• Adhesion control: Permanent adhesive supports reliable bond to the intended surface after steam exposure (surface prep still matters).
• Cleanroom program packaging: Cleanroom-processed and double-bagged for controlled introduction and storage.
• Workflow fit: 1.5" round format is ideal for small packs, bags, and container IDs without consuming excessive space.
• Supply efficiency: Bulk case packaging supports standardized labeling without “grab bag” substitutions that derail traceability.

• Label type: Autoclavable cleanroom label stock (blank)
• Material: Teslin® (per TDS)
• Finish: Matte (per TDS)
• Adhesive: Permanent adhesive (per TDS)
• Size: 1.5" round
• Core: 3" polyethylene core

Label performance depends on three controllables: (1) the substrate condition (clean/dry), (2) how the label is applied (pressure + edge contact control), and (3) the writing/printing method (ink/marker compatibility). TX515A provides a stable label stock and adhesive system for steam exposure, but the program outcome still hinges on defined handling rules.

Cleanroom label programs are selected as much for contamination control as for adhesion. TX515A is part of Texwipe’s cleanroom stationery approach where controlled packaging and material selection reduce particulate transfer and help protect sensitive areas and product contact surfaces.

Practical note: If you see edge lift, don’t start by swapping labels. Start by checking surface prep, condensation, and adhesive-edge touch events.

• Packaging: 500 labels/roll; 4 rolls/case; 2,000 labels/case
• Core: 3" polyethylene core
• Sterility: Non-sterile label product (use within your program controls)
• Traceability: Control part number/lot at receiving; store sealed; reseal/overbag after opening per facility SOP

• Stage with intent: Treat label rolls like other cleanroom stationery — keep them overbagged, and open only at designated points-of-use.
• Surface prep before labeling: Clean and dry the substrate. Oils, residues, and condensation are the top drivers of adhesion failure.
• Write/print controls: Standardize the pen/marker or printer method and allow ink to dry before the load is wrapped or staged.
• Placement discipline: Apply to a flat, low-abrasion area; avoid corners, folds, and high-touch zones that can peel edges during handling.
• Recordkeeping consistency: Define required fields (date, load ID, operator, contents) so every pack is releasable without interpretation.

• Labeling on damp surfaces: Condensation drives edge lift during heat/steam exposure and handling.
• Residues under adhesive: Oils, silicone films, or cleaning residues reduce bond strength and create intermittent failures.
• Adhesive-edge touch contamination: Finger/glove contact at the adhesive perimeter is a repeat offender for edge peel.
• Ink/marker not standardized: Some inks smear or fade under steam; define the approved pen/marker or print method.
• Poor placement: Corners, folds, and high-abrasion handling zones peel labels even when the label stock is correct.

These alternatives are commonly evaluated when programs standardize cleanroom labeling across multiple use cases (general ID vs. sterilization indicators vs. larger data fields).

• Texwipe TX522A Pre-Printed Sterilization Indicator Labels (2" x 2"): When you want a pre-printed indicator format with defined fields instead of a blank label.
• Texwipe TX542 Cleanroom Labels (4" x 2"): Larger format for more data fields, tray IDs, or equipment labels where space is limited with round labels.
• Texwipe PVC Cleanroom Tape (TVR Series): For temporary marking/segregation controls when labels aren’t the right tool (confirm residue tolerance and SOP).

• Sterilization traceability: Supports clearer linkage between packs and load documentation when fields and placement are standardized.
• Contamination control: Cleanroom-processed, double-bagged packaging supports controlled introduction and storage discipline.
• Audit readiness: Reduces illegible IDs and missing information that slow release checks and investigations.
• Practical scalability: Bulk packaging supports consistent use across departments without “substitute label” variability.