Skip to main content
Kimberly-Clark Kimtech A8 Lab Coat

Kimberly-Clark Kimtech (10071) A8 Lab Coat (Medium)

$254.36
(No reviews yet)
SKU:
10071
Availability:
5 - 7 Business Days
Shipping:
Calculated at Checkout
Quantity Option (Case):
25 Lab Coats

 

Kimtech™ 10071 A8 Certified Lab Coat — Medium
Disposable lab coat  ·  White  ·  Mid-calf  ·  3-layer SMS  ·  Knit cuffs  ·  6-snap front
Mfr Part #: 10071
Series: Kimtech™ A8 Certified Lab Coats
What it is

Kimtech™ 10071 is an A8 Certified disposable lab coat built on a 3-layer SMS (spunbond-meltblown-spunbond) nonwoven barrier platform. It is designed for laboratory and light industrial environments where the anticipated exposure is low-to-moderate for chemicals or fluids. The mid-calf length provides extended torso and lower-body coverage compared to hip-length jacket formats — the right choice when the risk assessment requires more coverage area without stepping up to a full coverall.

Construction & design
Material 3-layer SMS nonwoven (spunbond-meltblown-spunbond)
Size / fit Medium (unisex)
Length Mid-calf
Front closure 6-snap front
Cuffs Elastic knit — maintains sleeve position at the glove interface
Back vent Yes — supports airflow during extended wear
Pockets 3 reinforced
Neck loop Yes
Pack configuration 25 lab coats/case
Performance intent

Designed for general laboratory PPE in research, QA/QC, and industrial lab settings. Mid-calf length extends protection to the lower leg versus hip-length jacket formats. Knit cuffs reduce sleeve migration and wrist exposure during overhead and lateral movement. Elastic knit cuff and 6-snap front together define the garment's controlled-interface intent — both must be used correctly per SOP for the barrier to perform as positioned.

Hazard boundary: This garment is positioned for low-to-moderate chemical and fluid exposure. It is not a substitute for task-validated chemical splash PPE. Specify PPE per your EHS hazard assessment for higher-exposure tasks.
Brand note: The Kimtech™ PPE business was acquired by Ansell from Kimberly-Clark's KCPPE division. Part numbers and specifications remain aligned with manufacturer documentation under Ansell stewardship. For regulated or audit-controlled environments, always reference the current technical data sheet for this SKU.
Kimtech 10071 A8 Lab Coat Technical Vault | SOSCleanroom
The Technical Vault By SOSCleanroom
Kimtech™ A8 Certified 3-Layer SMS Barrier Mid-Calf Coverage Knit Cuffs 6-Snap Front 3 Reinforced Pockets 25/Case
Kimtech™ 10071 A8 Lab Coat (Medium): mid-calf SMS coverage for lab and industrial PPE programs

The Kimtech™ 10071 is an A8 Certified disposable lab coat built on a 3-layer SMS (spunbond-meltblown-spunbond) nonwoven barrier platform for laboratory and light industrial environments where the anticipated exposure is low-to-moderate for chemicals or fluids. The mid-calf length increases lower torso and upper leg coverage compared to hip-length jacket formats — the right selection when the risk assessment requires more coverage area without stepping up to a full coverall.

Knit cuffs maintain sleeve position at the glove interface, a 6-snap front closure runs the full garment length, and a back vent supports airflow during extended wear. Three reinforced pockets and an integrated neck loop round out the functional design for active bench and production environments.

Operations takeaway: Coverage failures on disposable lab coats typically occur at two points — the wrist gap and the front opening. Standardize the glove-over-cuff interface and all-snaps-closed rule in your SOP, and train to both.
Quick-reference specifications (SKU-level control for SOPs, RFQs, and receiving)
Parameter10071 Value / Detail
Product nameKimtech™ A8 Certified Lab Coat with Knit Cuffs
Manufacturer part #10071
BrandKimtech™ (Kimberly-Clark PPE, now part of Ansell)
ColorWhite
Size / fitMedium (unisex)
LengthMid-calf
Material / structure3-layer SMS nonwoven (spunbond-meltblown-spunbond)
CuffsElastic knit
Front closure6-snap
Pockets3 reinforced
VentilationBack vent
Neck loopYes
Pack configuration25 lab coats/case
Documentation rule: For validated or audit-controlled programs, base acceptance criteria on current manufacturer documentation and lot records — not web summaries, including this one.
Performance characteristics
Barrier & protection positioning
PropertyDetail
Barrier platform3-layer SMS nonwoven; designed for low-to-moderate chemical and fluid exposure environments
Certification levelKimtech™ A8 Certified — confirm current scope against manufacturer documentation
Coverage advantage vs. jacketMid-calf length reduces incidental lower-body contamination transfer during leaning, reaching, and seated work
Hazard boundary: This garment is positioned for low-to-moderate chemical and fluid exposure. It is not a substitute for task-validated chemical splash PPE. Specify PPE per your EHS hazard assessment for higher-exposure tasks.
Comfort & fit features
FeatureFunctional benefit
Elastic knit cuffsMaintains sleeve position at glove interface; reduces wrist gap during overhead and lateral movement
6-snap front closureFull-length closure from collar to hem; all snaps should be engaged during active work
Back ventSupports airflow to reduce heat buildup during extended wear
Neck loopAllows garment to be hung at the workstation without bench or floor contact
3 reinforced pocketsSupports tool and instrument staging; reinforcement reduces pocket tear-out under load
Corporate transition: Kimberly-Clark PPE → Ansell

The Kimtech™ and KleenGuard™ PPE portfolio was acquired by Ansell from Kimberly-Clark's KCPPE division. Product part numbers and specifications remain aligned with published manufacturer documentation. For regulated or audit-controlled environments, always reference current technical data under Ansell stewardship.

Intended use cases
  • Routine bench work, sample handling, and general lab operations requiring torso and sleeve protection
  • Environments where mid-calf coverage is required by risk assessment versus hip-length jacket formats
  • Workflows where knit cuffs improve glove interface control and reduce sleeve migration
  • Extended-wear settings where back vent reduces heat buildup during long shifts
  • Light industrial settings where low-to-moderate splash or fluid contact is the anticipated hazard
Length selection guide: Choose mid-calf (10071) when lower-body coverage is required by your risk assessment. Choose a hip-length jacket (10069) when mobility is the priority and the risk assessment permits reduced coverage area.
Best-practice use
  1. Size for full closure: Confirm the snap front closes without tension across the full length and sleeves maintain coverage during reaching and overhead work.
  2. Close all 6 snaps: All snaps from collar to hem must be engaged during any task where the garment's barrier is relied upon.
  3. Glove-over-cuff rule: Pull gloves over knit cuffs per SOP. This is the primary wrist-exposure control — confirm it is written, trained, and observed.
  4. Don/doff per procedure: Avoid touching the garment exterior with ungloved or contaminated hands during removal. Define a doffing sequence and train to it.
  5. Use the neck loop: When temporarily removed at the workstation, hang via the neck loop to avoid exterior surface contact with bench tops, chairs, or floors.
  6. Change-out triggers: Replace immediately if torn, visibly soiled, fluid-wet, or after any spill or splash event. Define trigger points in the SOP.
SOP standardization tip: If protection outcomes vary by operator, close the gap with four written controls: size selection criteria, all-snaps-closed rule, glove-over-cuff requirement, and documented change-out triggers.
When Kimtech 10071 is not the right choice
  • Sterile or aseptic workflows requiring sterile garments: 10071 is non-sterile. Specify the garment class required by your protocol and applicable standard.
  • High-splash or chemical permeation-hazard tasks: Specify PPE validated for the hazard per your EHS assessment.
  • Environments where pockets are contamination-control risks: Choose a no-pocket garment configuration when pocket-as-contamination-trap risk is unacceptable.
  • Full lower-body coverage required: Select a coverall when the hazard boundary extends below mid-calf.
  • Reuse after soiling or fluid contact: This is a single-use disposable garment. Do not launder or reuse after any compromise event.
Recommended glove pairing (process-aligned)

Lab coats and gloves function as a system. The knit cuff on the 10071 is only effective as a wrist-exposure control when paired with a glove that is consistently pulled over it per procedure. Select a glove appropriate for your chemical and contamination risk, then standardize the interface.

Glove interface rule: Knit cuffs control sleeve position — the glove is the actual wrist barrier. If gloves are loose, torn, or contaminated, knit-cuff coverage provides no additional protection. Treat glove integrity as a first-order control during all operations.
Why source Kimtech™ 10071 from SOSCleanroom
  • Exact SKU + case configuration control: Ordering by part number 10071 and confirmed case pack (25/case) reduces the risk of receiving a non-equivalent substitute garment.
  • Brand continuity after acquisition: Kimtech™ PPE is now under Ansell. SOSCleanroom sources the current product line under the correct successor SKUs, reducing procurement confusion during the brand transition.
  • Audit-readiness support: We help customers locate current TDS documentation, certification records, and lot continuity information to support receiving qualification and audit evidence packages.
  • Consolidated procurement: Pair garments with Ansell cleanroom gloves, Texwipe wipers, IPA, and other facility consumables in a single order.
Authoritative reference documents
Questions? Contact SOSCleanroom:
Email: Sales@SOSsupply.com  |  Phone: (214) 340-8574
Or try our AI ChatBot powered by SOSCleanroom data libraries — new for 2026!
© 2026 SOSCleanroom. All rights reserved.