Skip to main content
Grab-EEZ Cleanroom Wipe Stainless Steel Dispenser for 9" x 9" Wipes

Grab-EEZ Cleanroom Stainless Steel Wipe Dispenser for 9-Inch Square Sheets

$278.50
(No reviews yet)
SKU:
GE-DISP-SS
Availability:
7 - 10 Business Days
Shipping:
Calculated at Checkout
Quantity Option (Each):
1 Dispenser
Grab-EEZ® Cleanroom Stainless Steel Wipe Dispenser — for 9" x 9" C-Folded Wipes (GE-DISP-SS)
GE-DISP-SS is a stainless steel wipe dispenser designed to dispense 9" x 9" C-folded wipes one sheet at a time. In controlled environments, that single-sheet control reduces wipe waste and helps limit cross-contamination from repeatedly grabbing into an exposed stack. The unit can be used on a tabletop or mounted to a wall to keep wipe presentation consistent at the bench, cart, pass-through, or staging area.

Operationally, the value is repeatability: one wipe, one pull, minimal handling of the remaining wipes. That supports cleaner work habits, less countertop clutter, and fewer handling-driven contamination events when gloves are wet, solvent-exposed, or particulate-loaded.
Published configuration (GE-DISP-SS)
  • SKU: GE-DISP-SS
  • Dispenser material (as published): Stainless steel (Grade 316 stainless steel)
  • Compatible wipe format (as published): 9" x 9" C-folded wipes
  • Dispenser dimensions (as published): 14.5" x 9.75" x 5.75"
  • Mounting (as published): Countertop or wall mountable
  • Cover / loading features (as published): Redesigned cover for easier loading; optional plastic shield to protect wipes inside
  • Cleanroom positioning (as published): Up to ISO Class 5 (Class 100) cleanroom compatibility
  • USP positioning (as published): Meets USP <797> and USP <800> requirements
  • Available quantity option: Each
  • Each unit: 1 dispenser
  • Weight (as published on SOSCleanroom): 18.00 lbs
  • Availability (as published on SOSCleanroom): 7 - 10 business days
  • Note: 9" x 9" wipes are sold separately
Contamination control is mostly handling control
A dispenser does not make a wipe “cleaner” — it makes the handling more consistent. Single-sheet dispensing reduces hand contact with the remaining stack, helps keep wipes protected from the environment, and lowers the chance of dragging particulate or residue into the pack when gloves are damp or solvent-exposed.
Practical cleanroom use guidance (technicians and engineers)
  • Define a “wipe station” location: Mount or place the dispenser where wipe retrieval is natural but does not force operators to reach over product or critical surfaces.
  • Load with clean gloves only: Loading is when most cross-contamination occurs. Treat loading as a controlled step: clean gloves, clean bench zone, and keep spare refills sealed until use.
  • Enforce one-wipe pulls: The system is intended to prevent bunching. Train operators to pull straight and release the remaining stack immediately.
  • Control solvent exposure: If wipes are used with IPA or other solvents at the bench, keep solvent-wet gloves from contacting the dispenser opening and interior.
  • Clean to a cadence: Add the dispenser to your routine surface cleaning schedule so the exterior does not become a transfer point between tasks.
Compatibility and wipe-down notes
  • Solvent tolerance (as published): Stainless steel is stated to withstand a variety of cleaning solvents without degrading or breaking down. Validate your exact disinfectant/solvent set for streaking, residue, and contact-time effects per site SOP.
  • Corrosion control (as published): Stainless steel is described as corrosion resistant and easier to clean/disinfect due to a smooth, non-porous surface. After harsh chemistries, remove residues per your SOP to avoid staining or surface film buildup.
  • IPA / DI water wipe-down specifics: Not stated as a formal compatibility list for this dispenser. If your program requires documented compatibility, qualify using your approved wipe-down chemistry, contact times, and dry-time rules.
  • ESD: Not stated for the stainless steel dispenser on the SOSCleanroom page. If ESD controls are critical at the station, confirm grounding/bonding expectations with your ESD program owner.
Typical performance characteristics 
These are published functional characteristics intended to support deployment planning and station standardization.
Property Typical value Basis (as published)
Material Grade 316 stainless steel Manufacturer literature
Compatible wipe size 9" x 9" C-folded wipes SOSCleanroom product page / manufacturer literature
Mounting Countertop or wall mountable SOSCleanroom product page / manufacturer literature
Cleanroom positioning Up to ISO Class 5 (Class 100) compatible SOSCleanroom product page / manufacturer literature
External dimensions 14.5" x 9.75" x 5.75" Manufacturer literature
USP positioning Meets USP <797> and USP <800> requirements Manufacturer literature
Typical contamination characteristics 
Property Typical value Basis (as published)
Particle / extractables metrics Not published for the dispenser Not stated
Contamination risk drivers (practical) Handling contact, wet gloves, loaded wipe stacks, and exterior surface buildup Use practice
Common failure modes 
  • Multi-wipe pulls / bunching: Usually from angled pulling or overpacked refills. Prevent with correct loading orientation and straight pulls.
  • Cross-contamination into the stack: Caused by touching inside surfaces with wet/dirty gloves. Prevent with clean-glove loading discipline and keeping solvent-wet gloves away from the opening.
  • Residue film on the exterior: Happens when the dispenser is not included in routine wipe-down. Prevent with a defined cleaning cadence and dry-time discipline so residues do not build up.
  • Corrosion/staining symptoms: Often from chemistry residues left to dry or incompatible contact times. Prevent by following site-approved chemistry and rinse/wipe sequences where required.
  • Improper wipe selection: If a refill sheds excessively for your application, the dispenser will not solve the root cause. Prevent by qualifying the wipe media (particles/extractables) for the intended zone.
Storage and handling best practices
  • Stage the dispenser in a clean area until introduction; keep it protected to avoid shipping dust transfer to the exterior.
  • Assign ownership for refills and cleaning (who loads, who wipes down, and how often) so the station stays consistent across shifts.
  • Avoid placing the dispenser under direct airflow or near high-traffic zones where exterior surfaces load quickly.
  • Keep spare refills sealed; open only at point-of-use and load with clean gloves to protect the remaining stack.
Documentation 
Manufacturer datasheet (Grab-EEZ Stainless Steel Dispenser): Click Here
Manufacturer product page (High-Tech Conversions GRAB-EEZ Dispenser): Click Here
If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574.

OR check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try!
 
THIS IS NEW FOR 2026!

© 2026 SOS Supply. All rights reserved.