TX1008 AlphaLite 9" x 9" 100% Polyester Cleanroom Wiper

TX1008 AlphaLite is a lightweight, high-absorbency knitted polyester cleanroom wiper used for spill control and general wiping when you need low-linting performance (no wiper is truly ‘zero-lint’ in every process condition) with an economical, ultraclean presentation. It is constructed from 100% continuous-filament polyester and is cleanroom laundered and packaged to help maintain low contamination levels for controlled-environment wipe-downs.

Value note: TX1008 is commonly selected when teams want a lightweight knit for routine wipe-downs and spill pickup while keeping contamination contribution low and controlling consumable spend.

Specifications:

Size: 9" x 9" (23 cm x 23 cm) nominal
Material: 100% continuous-filament polyester
Construction: Lightweight, knitted polyester wiper
Edge: Cut edge
Packaging: 150 wipers/bag (2 inner bags of 75); 10 bags/case
Use environments: ISO 4–8 listed on SOSCleanroom; commonly used for spill control and general wiping in ISO Class 5–6 workflows (final suitability depends on your process and cleaning method)
Typical performance data (datasheet): Basis weight 121 g/m²; sorptive capacity 350 mL/m²; sorptive rate 0.5 seconds; LPC > 0.5 µm: 14 x 10⁶ particles/m²; fibers > 100 µm: 1,400 fibers/m²; NVR (IPA): 0.05 g/m²; NVR (DIW): 0.01 g/m² (typical values, not specifications)

About the Manufacturer:

Texwipe (an ITW company) differentiates itself in cleanroom wiping by treating the wiper as an engineered product, not a commodity consumable. Its manufacturing approach starts with fabric and yarn selection (often continuous-filament polyester for lower shedding), then controls edge construction (cut-edge, sealed-edge, and patented sealed-border options), controlled cleaning/laundering, and packaging aligned to cleanroom application tiers.

Texwipe also emphasizes verification through fibers/particles/ions/residue testing and describes automation-forward processes—such as Vectra® continuous cleaning with inspection controls—to improve lot-to-lot consistency and reduce handling-driven contamination risk. SOSCleanroom (SOS) supports that manufacturing discipline with a close working relationship with Texwipe focused on continuity of supply, clean documentation handoff (certs, lot traceability), and practical application support—so customers can standardize wiping materials with predictable performance while maintaining procurement reliability and audit readiness.

TX1008 Features:

100% polyester fiber — continuous-filament, lightweight knit
Cleanroom laundered and packaged
Solvent-safe Bag-Within-A-Bag® cleanroom packaging
Economical packaging options (stacked or bulk packaged options by family)
Statistical quality control
Lot-to-lot traceability

TX1008 Benefits:

Ultra-low contamination positioning: Designed for very low particulates and extractables to support rigorous wipe-downs with minimal fiber/particle release (process-dependent).
Lightweight handling: A lighter knit format that supports quick wipe-downs and spill pickup without excess bulk.
Economical program fit: Often selected where teams need consistent cleanroom performance while managing consumable cost.
Traceability discipline: Lot traceability supports documentation and standardization programs.

Common Applications:

Spill control and pickup of process fluids
General wiping of benches, carts, tools, equipment exteriors, and fixtures
Reducing particulate contamination during routine wipe-downs (process-dependent)
Cleaning and burnishing magnetic media surfaces
Cleaning and wiping sensitive surfaces in need of protection from contamination

Best-Practice Use:

Fold for control: Fold into quarters to create multiple clean faces; rotate faces instead of re-wiping with a loaded surface.
Wipe pattern: Use straight-line strokes (top-to-bottom or left-to-right) to avoid re-depositing contamination.
Wet vs. dry: For solvent wipe-downs, dampen—do not over-saturate—so you maintain control and reduce dripping.
Pressure discipline: Use light, even pressure on sensitive surfaces; increase pressure only as needed for spill pickup to avoid driving residues across finishes.
Change-out triggers: Replace the wiper when the face becomes visibly soiled, tacky, or leaves streaks/residue.

Selection Notes (TX1008 vs. Other Options)

TX1008 vs. TX1008B: Same AlphaLite family and nominal size; TX1008B is typically selected when a bulk-packed presentation is preferred for dispensing or staging.
AlphaLite vs. AlphaWipe (TX1009): Choose AlphaLite when you want a lightweight knit and economical program fit; step up to AlphaWipe when higher durability on rougher fixtures/equipment is the driver.
Cut edge vs. sealed-edge/border: If fiber release control at edges is a key risk in your process, consider sealed-edge or sealed-border options aligned to your contamination budget and validation requirements.

Link to Texwipe Technical Datasheet: Click Here

Other Similar Products Available From SOSCleanroom.com

AlphaLite Dry Wipers

TX1008: 9" x 9" nominal (23 cm x 23 cm), 150 wipers/bag
TX1008B: 9" x 9" nominal (23 cm x 23 cm), 150 wipers/bulk packed bag

Related 9" x 9" Polyester Wipers

TX1009: 9" x 9" polyester knit wiper, 150 wipers/bag
TX1009B: 9" x 9" polyester knit wiper, bulk packed presentation
TX2069: 9" x 9" sealed-edge polyester wiper
TX1029: 9" x 9" sealed-border polyester wiper
TX1080: 9" x 9" sealed-border polyester wiper

Notes: Looking for application guidance or qualification context for Texwipe TX1008 AlphaLite 9" x 9" polyester cleanroom wipers? Open the SOSCleanroom Technical Vault tab above for practical wiping technique, selection notes (TX1008 vs. alternatives), and the documentation details teams typically review when standardizing cleanroom wipes across ISO-class controlled environments.

SOSCleanroom.com supports contamination-control programs with cleanroom consumables in stock, fair pricing, and responsive technical support—backed by same-day shipping options and customer service that understands real cleanroom workflows.

Product page updated: Jan. 2, 2026 (SOS Technical Staff)

© 2026 SOS Supply. All rights reserved.

The Technical Vault By SOSCleanroom

ISO 14644 Operations Control AlphaLite® 100% Continuous-Filament Polyester Value-Focused General Wiping 9" x 9" Standard Format Lot Traceability

Texwipe TX1008 AlphaLite® 9" x 9": economical polyester knit wiping for routine cleanroom wipe-downs and controlled handling

Texwipe TX1008 AlphaLite® is a 100% continuous-filament polyester cleanroom wiper in a standard 9" x 9" format, commonly selected for routine wiping and general cleanroom cleaning where teams want the handling benefits of a polyester wipe and need an economical program option. In many operations, AlphaLite® is used for benches, tools, fixtures, and equipment wipe-downs, spill pickup, and controlled application/removal of cleaning solutions when the method does not require a sealed edge or an ultra-low residue specialty grade. As always, the performance outcome is driven by method control: wetness, directionality, fold discipline, and discard triggers.

Operations takeaway: AlphaLite® is most effective when your SOP defines wipe technique and change-out rules. Most “wiper failures” are technique failures—not material failures.

ISO-first context: wipers are part of operations control, not just a commodity

ISO 14644-5:2025 frames cleanroom performance around an Operations Control Programme (OCP) that governs cleaning, maintenance, material transfer, and personnel practices. Wipers belong in that system because the wipe, chemistry, and technique directly affect residue control, particle redistribution, and recontamination risk. If the wipe step is not repeatable operator-to-operator, the OCP needs more definition: wetness target (damp-film vs. wet), wipe pattern (straight-line, overlapping passes), fold pattern, and a defined discard trigger.

Control point: Avoid backtracking. Always wipe clean-to-less-clean and discard loaded faces before they become redeposit tools.

Specifications (SKU controls for RFQs, SOPs, and receiving)

Product: Texwipe AlphaLite® TX1008
Size: 9" x 9" nominal (23 cm x 23 cm)
Material / structure: 100% continuous-filament polyester (verify knit/construction per current manufacturer documentation)
Edge: Cleanroom-processed cut edge (verify edge treatment per current manufacturer documentation)
Processing: Cleanroom laundered/processed and packaged; lot traceability
Typical ISO positioning: Process dependent; commonly used for general wiping across controlled environments
Packaging: Verify current bag/case counts and configuration per current manufacturer documentation

Receiving rule: If TX1008 is written into SOPs, lock the exact SKU to avoid “equivalent” substitutions that change handling, absorbency, and residue performance.

What TX1008 is designed to do (typical use cases)

Routine wiping of benches, tools, fixtures, and equipment in controlled environments
General spill pickup and wipe-down tasks where a polyester program wipe is suitable
Applying and removing common cleanroom chemistries (e.g., IPA; confirm compatibility to SOP)
Bulk wipe steps prior to a defined finishing pass (when required by the method)
Staging/lining tasks where allowed by contamination controls (validate to your process)

Selection note: If your method requires sealed edges, ultra-low residues, or sterile presentation, choose the validated wipe grade required by the SOP rather than substituting a general program wipe.

Best-practice use (reduce residues, particles, and rework)

Control introduction: bring wipes into the cleanroom per OCP rules (outer packaging removal, staging, and storage).
Fold for faces: create multiple clean faces; use one face per pass, then refold.
Damp-film technique: wet to a controlled damp state (not dripping) to reduce pooling and streaking.
Straight-line strokes: parallel, overlapping passes; avoid circular scrubbing that redistributes contamination.
Clean-to-less-clean flow: wipe from cleanest to dirtiest; do not backtrack.
Change-out triggers: discard when loaded, smeary, tacky, or when surface-quality requirements are at risk.

Method standardization tip: If outcomes differ by operator, lock four variables in the SOP: wetness target, stroke count, fold pattern, and change-out point.

Misuse controls & when not to use TX1008

If sterility is required: do not substitute a non-sterile wipe for sterile workflows.
If ultra-low residues/ions are gating: confirm extractables requirements against current manufacturer documentation and internal limits.
If the surface is easily scratched: validate on delicate finishes; avoid excessive pressure and unapproved chemistries.
If chemistry is aggressive: verify compatibility and safety for solvents/cleaners; do not assume universal compatibility.

Recommended cleanroom glove pairing (ISO-aligned)

For ISO-controlled wiping applications, pair this cleanroom wipe with a cleanroom-processed, low-particle nitrile glove to reduce contamination transfer during handling and routine wipe-downs.

Ansell Nitrilite® 93-311 Cleanroom Nitrile Gloves — ISO Class 5 (Class 100), cleanroom processed and packaged

Why this matters: Wiping is only as clean as the hand that holds the wipe. Cleanroom-grade gloves reduce transfer contamination and support repeatable technique.

Glove discipline: Change gloves when contaminated, solvent-wet, torn, or after contacting non-controlled surfaces. Treat gloves as part of the wipe system.

Why buy ITW Texwipe AlphaLite® TX1008 from SOSCleanroom

Configuration control: Polyester wipes vary by construction and edge finish; ordering by exact SKU supports method consistency.
Audit readiness support: We help customers locate current manufacturer documentation aligned to receiving controls and lot traceability expectations.
One-cart procurement: Pair AlphaLite® wipes with cleanroom gloves, swabs, and facility consumables so cleaning methods stay consistent.

Manufacturer documentation (authoritative references)

SOSCleanroom TX1008 product page: Click Here
ITW Texwipe AlphaLite® documentation portal (search TX1008): Click Here
ISO 14644-5:2025 operations standard overview (ISO listing): Click Here

If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574. OR check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try! THIS IS NEW FOR 2026! © 2026 SOSCleanroom. All rights reserved.