TX8727 PolySat 6" x 11" Polypropylene Cleanroom Wiper Pre-Wetted 70% IPA

TX8727 PolySat is a soft, low-linting (no wiper is truly ‘zero-lint’ in every process condition) pre-wetted cleanroom wipe designed for cleaning sensitive surfaces and small, confined work areas in controlled environments. It uses a 100% melt-blown polypropylene substrate with a cut edge and is pre-wetted with a 0.2 µm filtered 70% USP-grade isopropyl alcohol (IPA) / 30% deionized water (DIW) solution to deliver consistent wetness and repeatable cleaning performance while reducing solvent handling at the point of use.

• Size: 6" x 11" (15 cm x 28 cm) open; 6" x 4" folded
• Material: 100% melt-blown polypropylene
• Construction: Pre-wetted wipe; dove-folded format for controlled dispensing
• Edge: Cut edge
• Wetting solution: 0.2 µm filtered 70% IPA / 30% DIW (USP-grade IPA)
• Packaging: 75 wipers/refill bag; case unit = 20 refill bags of 75 wipers and 1 reclosable container (1,500 total wipers/case)
• Container: Polypropylene case with secure tabs; secure, locking container to reduce evaporation; recyclable polypropylene
• Use environments: ISO 5–8 are commonly referenced for PolySat pre-wetted wipers (some product literature references ISO 5–9; final suitability depends on your process and cleaning method)
• Shipping note: Consumer Commodity ORM-D; Ground shipping only (per SOSCleanroom listing)

Texwipe (an ITW company) differentiates itself in cleanroom wiping by treating the wiper as an engineered product, not a commodity consumable. Its manufacturing approach starts with substrate selection and conversion controls, then aligns packaging formats (bags, tubs, and flexpacks) to preserve wetness consistency and reduce handling-driven contamination risk for the intended cleanroom tier.

For pre-wetted programs, Texwipe emphasizes controlled filling (USP-grade alcohol, filtration, and repeatability) and lot coding/traceability. SOSCleanroom (SOS) supports that documentation discipline with continuity of supply, clean certificate handoff (as applicable), and practical application support—so customers can standardize wiping materials with predictable performance while maintaining procurement reliability and audit readiness.

• 100% melt-blown polypropylene substrate
• Pre-wetted with 0.2 µm filtered 70% IPA / 30% DIW (USP-grade IPA)
• 6" x 4" folded, 6" x 11" open; dove-folded for controlled dispensing
• Polypropylene case with secure tabs; secure, locking container to reduce evaporation
• Low particle generation and low levels of solvent extractables (process-dependent)
• Enhanced traceability (lot coding/identification per PolySat program literature)

• Reduced solvent handling: Consistent wetness and VOC levels help standardize wipe-down results vs. ad-hoc wetting (validate for your SOP)
• Small-space friendly: Designed for confined work areas and easy storage, with one-hand operation from package to application
• Evaporation control: Locking container helps preserve wetness level between uses
• Gentle on sensitive surfaces: Soft polypropylene substrate is commonly selected where surface sensitivity matters

• Small spaces and confined work areas
• Cleaning sensitive surfaces
• Final cleaning of products and surfaces
• Gowning rooms, work surface cleaning, parts cleaning, injection mold cleaning
• Wiping/cleaning surfaces, equipment, and parts; removing lubricants, adhesives, and other process aids (process-dependent)

• Control the fold: Keep the dove-fold intact until dispense; once opened, refold into workable panels to expose fresh faces and reduce re-deposition.
• Wipe pattern: Use straight-line strokes (one direction) and avoid circular wiping that can redistribute residues.
• Evaporation discipline: Reseal the container immediately after removing a wipe to preserve wetness consistency.
• Change-out triggers: Replace when the wipe face becomes visibly soiled, begins to drag, or leaves streaks/residue.
• Compatibility check: Validate surface compatibility and residue expectations for your specific material set and cleaning acceptance criteria.

• TX8727 vs. TX8723: Same nominal open size (6" x 11") and PolySat pre-wetted 70% IPA concept; TX8723 is positioned as the current alternative and is referenced as NSF-rated in PolySat literature.
• Need a larger wipe? Consider TX1040 (7" x 11") or TX1051 (9" x 11") when coverage per wipe matters.
• Need sterile? Consider sterile PolySat options (TX3213 or TX3216) when your process requires sterile presentation and supporting documentation.

PolySat Pre-Wetted Wipers (70% IPA)

• TX8723: 6" x 11" pre-wetted 70% IPA (commonly referenced as the current alternative in this size)
• TX1040: 7" x 11" pre-wetted 70% IPA
• TX1051: 9" x 11" pre-wetted 70% IPA

Sterile PolySat Pre-Wetted Wipers (70% IPA)

• TX3213: sterile 9" x 11" pre-wetted 70% IPA (flexpack format)
• TX3216: sterile 9" x 11" pre-wetted 70% IPA (flexpack format)