Texwipe TX8723 PolySat® 6" x 11" Polypropylene Cleanroom Wipers - Pre-Wetted 70% IPA / 30% DIW - 75/Bag - 1,800/Case
Texwipe TX8723 PolySat® is a non-sterile, pre-wetted cleanroom wiper manufactured from 100% melt-blown polypropylene with a cut-edge construction. Designed for controlled surface cleaning, the narrow 6" x 11" format is particularly convenient for smaller workspaces, equipment housings, drawers, fixtures, pass-through areas, and other locations where a larger wiper may be difficult to handle.
Each TX8723 wiper is factory pre-wetted with 70% USP-grade isopropyl alcohol (IPA) and 30% deionized water (DIW). The wetting solution is filtered to 0.2 µm before packaging. This ready-to-use presentation helps reduce manual alcohol dilution, individual-wiper wetting, and the need to apply free liquid using spray bottles or squeeze bottles in restricted working areas.
The soft, melt-blown polypropylene substrate is manufactured for low particle and extractables contribution during appropriate cleaning operations. Its flexible nonwoven structure supports wiping of compatible sensitive surfaces while resisting snagging during normal use on suitable equipment and components.
TX8723 is supplied in easy-to-use peel-and-reseal bags containing 75 pre-wetted wipers each. A manufacturer case contains 24 bags, totaling 1,800 individual wipers. The reclosable packaging helps reduce IPA evaporation and unnecessary exposure of unused material between dispensing events.
Texwipe identifies TX8723 for ISO Classes 5 through 8 and EU GMP Grades B through D. The product is non-sterile and should be selected according to the facility's approved cleaning procedures, surface-compatibility requirements, particle and residue limits, and contamination-control program.
TX8723 is also NSF-certified as an A1 general cleaner for qualifying cleaning applications in and around food-processing areas. This classification is subject to specific use restrictions and does not authorize unrestricted direct food contact. All food products and packaging materials must be removed or protected before use, and cleaned surfaces must receive a potable-water rinse after application.
Narrow-Format Cleaning Advantage: TX8723 combines a compact 6" x 11" polypropylene substrate with manufacturer-prepared 70% IPA / 30% DIW, controlled solution filtration, and convenient peel-and-reseal packaging. Its narrow geometry helps operators clean smaller areas and constrained equipment surfaces without relying on oversized wipers or separately applied solvent.
Specifications:
- Manufacturer: Texwipe, an ITW company
- Manufacturer Part Number: TX8723
- Product Family: PolySat®
- Product Type: Non-Sterile Pre-Wetted Cleanroom Wiper
- Material: 100% melt-blown polypropylene
- Fabric Construction: Soft nonwoven
- Edge Treatment: Cut edge
- Color: White
- Nominal Open Size: 6" x 11" (15 cm x 28 cm)
- Primary Configuration: Narrow-format pre-wetted wiper
- Wetting Solution: 70% isopropyl alcohol / 30% deionized water
- IPA Quality: USP grade
- Solution Filtration: 0.2 µm
- Presentation: Factory pre-wetted, ready to use
- Quantitative Solvent Loading: No specific mL/wiper or g/wiper loading established by the reviewed TDS
- Sterility: Non-sterile
- Manufacturer Cleanroom Classification: ISO Classes 5-8
- Traditional Cleanroom Classes: Class 100-100,000
- EU GMP Environment: Grades B-D, subject to site qualification
- NSF Classification: A1 general cleaner
- Food-Processing Use: Subject to NSF A1 conditions and required potable-water rinse
- Direct Food Contact: Not an unrestricted direct food-contact cleaning product
- Typical Particles ≥0.5 µm: 13 x 106 particles/m²
- Typical Fibers >100 µm: 4,500 fibers/m²
- Typical Sorptive Capacity: 360 mL/m²
- Typical Sorptive Rate: Less than 0.3 seconds
- Typical Basis Weight: 34 g/m²
- Packaging: Peel-and-reseal bag
- Wipers per Bag: 75
- Bags per Manufacturer Case: 24
- Total Wipers per Case: 1,800
- SOSCleanroom Quantity Options: Individual bag or full manufacturer case
- Manufacturer Lot Identification: Lot coded
- Published Shelf Life: 3 years from date of manufacture
- Country of Manufacture: USA
- Manufacturer Quality Registration: ISO 9001
- Primary Application: General controlled-environment surface cleaning
- Use: Disposable, single-use wiper
- Disinfectant Status: No independently established registered disinfectant or sporicidal claim
- Manufacturer Technical Reference: TEX-LIT-TDS-013 Rev. 00-05/18
Packaging and Manufacturer Case Configuration:
Texwipe TX8723 is packaged in a convenient peel-and-reseal bag intended for controlled dispensing of pre-wetted wipes. The reclosable format helps minimize solution evaporation during normal use, provided the package is closed properly between dispensing events.
| Purchase Configuration |
Packaging |
Total Wipers |
| Individual Bag |
1 peel-and-reseal bag containing 75 wipers |
75 |
| Manufacturer Case |
24 bags of 75 wipers each |
1,800 |
The 75-count bag offers a compact point-of-use format for controlled workplaces. The 24-bag manufacturer case provides convenient quantities for recurring cleaning programs and distribution to multiple approved work areas.
Packaging Confirmation: TX8723 contains 75 wipes per peel-and-reseal bag and 24 bags per manufacturer case, totaling 1,800 wipes. TX8727 is a related 6" x 11" PolySat® refill configuration and should not be confused with the standard TX8723 bag presentation.
About the Manufacturer:
Texwipe, an ITW company, manufactures cleanroom wipers, swabs, cleaning-validation products, and contamination-control supplies for pharmaceutical manufacturing, biotechnology, medical devices, semiconductor processing, laboratories, food-processing environments, and other controlled industries.
The PolySat® product family uses soft melt-blown polypropylene with factory-prepared IPA/DIW wetting chemistry. Different sizes and packaging configurations allow customers to select a suitable wiping format for their equipment and cleaning needs.
SOSCleanroom is an authorized Texwipe distributor, providing manufacturer product documentation, wiper-selection assistance, packaging information, and procurement support for contamination-controlled facilities.
TX8723 Features:
- 100% melt-blown polypropylene substrate
- Soft nonwoven construction
- Cut-edge wiping material
- Narrow 6" x 11" nominal dimensions
- Convenient handling for constrained workspaces
- Low-linting material designed for general cleanroom cleaning
- Pre-wetted with 70% USP-grade IPA / 30% DIW
- 0.2 µm filtered wetting solution
- Factory-prepared, ready-to-use chemistry
- Controlled wetness for repeatable wiping
- Non-sterile presentation
- ISO Classes 5-8 manufacturer positioning
- EU GMP Grades B-D environmental positioning
- NSF A1 general-cleaner listing
- Manufactured for low levels of particles and extractables
- Designed to resist snagging during appropriate wiping of abrasive surfaces
- Peel-and-reseal dispensing package
- Reduced need for manual alcohol dilution and wetting
- Lot-coded manufacturer packaging
- Three-year manufacturer-published shelf life
- 75 wipers per bag
- 24 bags per case
- 1,800 wipers per manufacturer case
TX8723 Benefits:
- Narrow-Format Access: The 6" width helps operators manage wiping tasks in drawers, equipment sections, and constrained work areas.
- Controlled Surface Coverage: The 11" length provides wiping reach while maintaining a narrower working profile.
- Soft Polypropylene: Supports cleaning of compatible sensitive surfaces when used with an appropriate procedure.
- Low Particle Design: Manufactured to control particle and extractables contribution during general cleaning.
- Repeatable Cleaning Chemistry: Factory-prepared 70% IPA / 30% DIW helps reduce mixing variability.
- Less Free-Liquid Handling: Pre-wetted wipes reduce the need to spray or pour alcohol onto work surfaces.
- Convenient Dispensing: Peel-and-reseal bags allow access to the required quantity without opening a separate bulk container.
- Evaporation Management: Proper closure helps maintain the wetness of unused wipes.
- Reduced Solvent Application Variability: Pre-wetted material reduces differences associated with individual operators manually wetting wipes.
- Suitable for General Residue Removal: Helps collect compatible light soils, lubricants, and processing aids.
- NSF A1 Listing: Provides a documented general-cleaner classification for qualified food-processing uses.
- Traceability: Manufacturer lot coding supports receiving and quality records.
- Flexible Purchasing: Individual 75-count bags and full manufacturer cases accommodate different operating volumes.
Common Applications:
- Wiping smaller or confined equipment workspaces
- Cleaning compatible production equipment surfaces
- Wiping drawers, fixtures, carts, and staging surfaces
- General cleanroom workstation cleaning
- Cleaning pass-through accessories under approved procedures
- Removal of compatible lubricants and handling residues
- Cleaning small components and production parts
- Wiping cleanroom equipment housings
- Routine cleaning in qualified ISO Class 5-8 environments
- Controlled cleaning of tools and accessories
- Cleaning compatible items before controlled-area introduction
- Selected electronics and microelectronics support-area cleaning
- General laboratory and medical-device production support
- Approved cleaning in food-processing areas under NSF A1 conditions
- Applications where a full-width 9" x 11" wipe is unnecessarily large
- Cleaning procedures requiring factory-prepared 70% IPA wiping chemistry
Narrow-Format Polypropylene Construction:
TX8723 combines a narrow 6" x 11" format with a soft melt-blown polypropylene substrate. This construction is intended to help operators control wiping contact in smaller workspaces while maintaining sufficient wiping length for suitable surfaces.
- Melt-Blown Polypropylene: Provides a soft, flexible synthetic wiping material.
- Cut-Edge Construction: Suitable for general wiping but does not provide sealed-border edge containment.
- Narrow Geometry: Helps reduce folding and handling of oversized wipers in confined areas.
- Surface Contact: The material is designed for compatible sensitive surfaces.
- Normal Abrasion Resistance: Texwipe identifies PolySat® as resistant to easy snagging during appropriate wiping of abrasive surfaces.
- Particle and Extractables Control: Manufactured to provide low contamination contribution under the applicable test methods.
- Critical Surfaces: Evaluate a sealed-edge polyester alternative when the procedure has more demanding fiber or particulate limits.
- Material Compatibility: Confirm compatibility between polypropylene, IPA, the surface, and any residue being removed.
Size Selection Guidance: TX8723's narrower geometry is beneficial where working room and wipe handling are limited. It is not automatically the best choice for every large-surface cleaning task. Select the wipe size according to access, surface coverage, contamination requirements, and approved wiping procedures.
70% IPA / 30% DIW Chemistry and Solvent Loading:
TX8723 is pre-wetted with 70% USP-grade IPA and 30% DIW using a solution filtered to 0.2 µm. Texwipe identifies the PolySat® formulation as providing repeatable wetness and volatile organic compound (VOC) levels under its manufacturing controls.
- 70% IPA: Supports removal of compatible oils, processing aids, and light surface residues.
- 30% DIW: Supplies the water component of the formulated wetting solution.
- USP-Grade IPA: Confirmed by Texwipe for TX8723.
- 0.2 µm Filtration: Applied to the solution used in pre-wetting.
- Factory Pre-Wetting: Reduces variability associated with manual dilution and wipe saturation.
- Controlled Wetness: Supports repeatable cleaning when the package is handled correctly.
- Quantitative Loading: A specific volume or mass of solution per wipe is not stated in the reviewed manufacturer TDS.
- Evaporation: IPA can be lost from exposed wipes and improperly closed bags.
- Material Compatibility: Evaluate coatings, adhesives, plastics, labels, finishes, and other IPA-sensitive materials.
- Non-Sterile Presentation: Solution filtration does not establish sterility of the finished wiper.
- Disinfectant Claims: The 70% IPA concentration alone does not establish a validated disinfectant contact time or organism-specific efficacy.
- Sporicidal Requirements: Use an appropriately qualified sporicide when specified by the procedure.
Solvent Loading Guidance: Texwipe confirms the 70% IPA / 30% DIW formulation and controlled pre-wetting, but the referenced TDS does not publish a fixed milliliter-per-wipe loading for TX8723. When a qualified process requires an exact quantitative solvent-loading specification, request the applicable information directly from Texwipe.
NSF A1 Food-Processing Cleaner Classification:
Texwipe TX8723 PolySat® is NSF-certified as an A1 general cleaner for permitted applications on surfaces in and around food-processing areas. This classification carries specific handling and rinse requirements.
- NSF Category: A1 general cleaner.
- Application Area: Qualifying surfaces in and around food-processing areas.
- Direct Food Contact: Not intended for direct contact with food.
- Food Protection: Remove or protect all food products before cleaning.
- Packaging Protection: Remove or protect food-packaging materials before use.
- Post-Cleaning Requirement: Rinse cleaned surfaces with potable water after application.
- Procedure Compliance: Follow the applicable food-facility cleaning and sanitation procedures.
- No Automatic Sanitizer Claim: NSF A1 general-cleaner listing does not independently establish registered sanitizer or disinfectant efficacy.
- Residue Conditions: Texwipe reports no noticeable odor or visible residue when the product is used according to its instructions.
Important NSF A1 Use Requirement: Before using TX8723 in food-processing or food-handling facilities, remove or protect food products and packaging materials. After cleaning, rinse the cleaned surfaces with potable water. Do not interpret NSF A1 as unrestricted authorization for direct food-contact use.
Recommended Wiping Procedure:
TX8723 is designed for convenient controlled wiping. In narrow workspaces, proper dispensing, folding, wipe replacement, and solvent management help prevent contamination from being pushed into corners or redeposited on cleaned surfaces.
- Confirm the Application: Verify the wiper, chemistry, and cleanroom classification are appropriate for the task.
- Inspect the Bag: Check for damage, leakage, or compromised closure.
- Prepare the Workspace: Follow the facility's approved equipment cleaning and safety instructions.
- Use Appropriate PPE: Wear approved cleanroom gloves and other required protective equipment.
- Open the Package: Peel back only the necessary portion of the closure.
- Remove a Wiper: Avoid touching or contaminating the remaining wipes.
- Reseal Immediately: Limit evaporation and environmental exposure.
- Fold for Control: Create manageable wiping faces where the approved SOP permits.
- Wipe Systematically: Use straight, overlapping strokes in the prescribed direction.
- Avoid Excessive Pressure: Prevent unnecessary abrasion on sensitive surfaces.
- Change Wiping Faces: Avoid returning contaminated portions of the wipe to cleaned areas.
- Replace as Needed: Discard wipes that are dry, soiled, damaged, or unsuitable for the next area.
- Prevent Reuse: Never return a used wiper to its original bag.
- Apply Special Requirements: Follow the potable-water rinse requirement where NSF A1 food-processing use applies.
- Document Cleaning: Complete required production or environmental cleaning records.
Wiping Guidance: Narrow equipment areas can make cross-contamination and solvent pooling more difficult to manage. Use the facility's approved cleaning pattern, avoid excessive wetting, and replace wipes before contamination is transferred to another surface.
Peel-and-Reseal Packaging and Evaporation Control:
TX8723's peel-and-reseal bag allows operators to remove individual wipers while keeping the remaining contents enclosed. Maintaining proper closure helps preserve the manufacturer-prepared solvent condition and supports consistent wiping throughout normal use.
- Open Only When Needed: Minimize unnecessary exposure of unused wipers.
- Reseal Promptly: Close the package securely after dispensing.
- Protect the Opening: Prevent contact with contaminated gloves, tools, and equipment.
- Limit Heat Exposure: Avoid conditions that accelerate evaporation.
- Inspect Wetness: Do not use inadequately wetted wipers when a defined wetness is required.
- Do Not Re-Wet Without Authorization: Adding solvent may change the approved chemistry and package condition.
- Follow Open-Pack Limits: Apply the facility's approved in-use requirements.
- Maintain Lot Information: Retain manufacturer identification when required for traceability.
- Use Appropriate Storage: Follow the applicable manufacturer SDS and flammable-material requirements.
Packaging Guidance: Resealable packaging reduces evaporation but does not prevent all solvent loss after opening. If wipers become unexpectedly dry, inspect closure integrity, storage conditions, handling, and the approved open-package use period.
Typical Particle, Fiber, Ionic and Extractables Performance:
Texwipe publishes typical analytical data for the PolySat® polypropylene substrate. These values may assist material selection but are not guaranteed TX8723 lot-specific acceptance criteria.
| Typical Manufacturer Characteristic |
Reported Value |
| Particles ≥0.5 µm |
13 x 106 particles/m² |
| Fibers >100 µm |
4,500 fibers/m² |
| Nonvolatile Residue - IPA Extractant |
0.001 g/m² |
| Nonvolatile Residue - DIW Extractant |
0.005 g/m² |
| Sodium |
0.3 ppm |
| Potassium |
0.2 ppm |
| Chloride |
0.15 ppm |
| Sorptive Capacity |
360 mL/m² |
| Sorptive Rate |
Less than 0.3 seconds |
| Basis Weight |
34 g/m² |
These values describe typical PolySat® material characteristics under referenced test methods. Actual cleaning results depend on the substrate, surface, chemistry, contamination levels, and wiping technique.
Performance Data Guidance: Manufacturer typical analyses are not lot-specific specifications or guarantees that a particular cleaning process will meet its acceptance criteria. For critical surface requirements, evaluate the current TDS and applicable facility validation or qualification data.
Selection Notes: TX8723 vs. Other PolySat® Wipers:
Texwipe provides different PolySat® sizes and packaging formats. TX8723 is distinguished by its narrow 6" x 11" size and 75-count peel-and-reseal bag. Other products may be more suitable for larger surfaces, alternative dispensing systems, or sterile cleaning procedures.
| Product |
Size |
Presentation |
Manufacturer Packaging |
| TX8723 |
6" x 11" |
Non-sterile, 70% IPA, NSF A1 |
75/bag; 24 bags/case; 1,800 wipers |
| TX8727 |
6" x 11" |
Non-sterile, 70% IPA, refill configuration |
75/refill bag; 20 bags and 1 container/case |
| TX1040 |
7" x 11" |
Non-sterile, 70% IPA |
200/bag; 4 bags/case; 800 wipers |
| TX1051 |
9" x 11" |
Non-sterile, 70% IPA |
50/flexpack; 24 packs/case; 1,200 wipers |
| TX3213 |
9" x 11" |
Sterile, 70% IPA |
50/flexpack; 20 packs/case; 1,000 wipers |
- Choose TX8723: When narrow-format wiping and compact 75-count bags are preferred.
- Choose TX8727: When the related refill format and reclosable container are preferred.
- Choose TX1040: For a slightly wider 7" x 11" wiper supplied in 200-count slider bags.
- Choose TX1051: For larger 9" x 11" general-purpose polypropylene wiping.
- Choose TX3213: Where a sterile polypropylene wipe is required by the approved procedure.
- Confirm Food-Processing Conditions: Do not transfer TX8723's NSF A1 listing to other PolySat® SKUs without verifying their separate approvals.
- Check Substrate and Case Count: Similar IPA chemistry does not make different configurations automatically interchangeable.
Product Selection Guidance: TX8723 is the narrow 6" x 11" PolySat® format with 75 wipes per bag and NSF A1 general-cleaner listing. Choose the correct product according to surface access, sterility, contamination-control requirements, packaging, and the facility's approved cleaning program.
Safety and Chemical Compatibility:
TX8723 contains IPA, a flammable solvent. The pre-wetted format helps reduce separate liquid handling but does not eliminate chemical hazards, surface-compatibility requirements, or the need for approved cleaning procedures.
- Flammability: Keep away from sparks, open flames, heat, and ignition sources.
- Ventilation: Follow workplace controls for alcohol vapor exposure.
- Personal Protective Equipment: Use gloves, eye protection, and other equipment required by the current SDS and facility procedures.
- Surface Compatibility: Evaluate coatings, adhesives, plastics, labels, and sensitive finishes before use.
- Electrical Equipment: Follow equipment-approved cleaning and electrical safety instructions.
- Non-Sterile Material: Do not substitute for sterile wiping consumables when sterile presentation is required.
- Disinfection: Do not assume registered disinfectant efficacy or a universal microbial contact time.
- Sporicidal Requirements: Use a separately qualified sporicide where required.
- Food-Processing Areas: Follow NSF A1 use restrictions and complete the required potable-water rinse.
- Hazardous Drug Residues: Do not assume IPA wiping alone provides validated hazardous-drug deactivation or decontamination.
- Shipping: Subject to applicable current dangerous-goods classification, package quantity, transportation mode, and carrier requirements.
- Waste Disposal: Follow procedures for solvent-containing and contaminated wiping materials.
Safety Guidance: TX8723 is non-sterile and pre-wetted with flammable 70% IPA. Use only on compatible surfaces and follow the applicable Safety Data Sheet, facility cleaning procedures, and NSF A1 instructions when used in food-processing environments.
Shelf Life, Storage and Disposal:
- Manufacturer Part Number: TX8723
- Individual Package: 75 pre-wetted polypropylene wipers
- Manufacturer Case: 24 bags / 1,800 wipers
- Supplied Sterility: Non-sterile
- Published Shelf Life: 3 years from manufacture
- Expiration: Follow manufacturer labeling
- Traceability: Manufacturer lot identification
- Packaging Condition: Inspect for damage, leakage, or compromised seals
- Storage: Follow applicable manufacturer SDS and flammable-material requirements
- Ignition Sources: Keep away from sparks, flames, and excessive heat
- Material Introduction: Follow facility requirements for controlled areas
- Dispensing: Protect unused material from unnecessary contact
- Evaporation Control: Reseal immediately after dispensing
- Opened-Bag Handling: Apply approved in-use limits
- Food-Processing Use: Observe NSF A1 conditions and the potable-water rinse requirement
- Wiper Condition: Discard dry, soiled, damaged, or otherwise compromised wipes
- Reuse: Single use only
- Disposal: Follow approved alcohol-containing waste procedures
Manufacturer Technical Documents:
Other Similar Products Available From SOSCleanroom.com
PolySat® Pre-Wetted and Alternative Cleanroom Wipers
Notes: Need assistance choosing narrow-format pre-wetted wipes, comparing PolySat® packaging options, or confirming NSF A1 cleaning requirements? SOSCleanroom can help with product selection, manufacturer technical documentation, packaging quantities, and procurement requirements.
SOSCleanroom.com supports pharmaceutical, biotechnology, medical device, semiconductor, laboratory, food-processing, and other controlled environments with cleanroom wipers, pre-wetted cleaning products, and contamination-control supplies.
Product description updated: November 3, 2026 (SOS Technical Staff)
© 2026 SOS Supply. All rights reserved.