Teknipure TM-MD47 TekniMop Microdenier Mop Cover with Elastic, Integrated Pad, 4″x7″ (Refills) (Case Qty.) - SOSCleanroom Standard Specification
The Teknipure TM-MD47 TekniMop™ Microdenier Mop Cover is a dry, non-sterile cleanroom mop cover designed for high-efficiency small-surface cleaning in controlled environments. Its microdenier polyester construction provides enhanced surface contact for particle, residue, and microorganism capture, while the integrated absorbent pad adds cushioning, liquid retention, and solution delivery without requiring a separate mop pad.
Capture + absorbency in one cover: TM-MD47 combines a microdenier outer cleaning layer with an integrated absorbent pad and elastic fit. This design supports effective contamination pickup, controlled liquid release, and secure installation on the TKM47 frame while eliminating the need to purchase and install a separate mop pad.
Specifications:
- Part Number: TM-MD47
- Product Type: Microdenier mop cover with elastic and integrated pad
- Size: 4" x 7" (10 cm x 18 cm)
- Material: Microdenier polyester
- Pad: Integrated absorbent pad
- Attachment: Elastic edge
- Format: Dry
- Sterility: Non-sterile
- Cleanroom Environment: Designed for applications in ISO Class 5–8 environments as specified by Teknipure
- Packaging: 10 covers/bag, 20 bags/case
- Total Case Quantity: 200 covers/case
- Compatible Frame: TKM47 TekniMop™ 4" x 7" Carbon Fiber Flat Mop Frame
Where TM-MD47 Fits in Controlled Environments
TM-MD47 is designed for small-surface cleaning applications where effective particle, residue, and contamination pickup is a higher priority than simple liquid delivery alone. The high-density microdenier construction increases surface contact with the area being cleaned, helping capture and retain contamination during controlled wiping and mopping procedures.
The integrated absorbent pad provides a soft, cushioned cleaning surface while increasing liquid-holding capacity for disinfectant application, spill control, and wet-cleaning procedures. Because the pad is enclosed within the mop-cover construction, there is no need to install a separate pad beneath the cover.
Typical program fit: Isolator and RABS/BSC cleaning, gloveboxes, pass-through chambers, equipment and work surfaces, benches, residue removal, particulate pickup, disinfectant application, spill control, and other small-surface contamination-control procedures.
TM-MD47 is supplied dry and non-sterile. Final suitability should be determined according to the target surface, cleaning chemistry, contamination type, required absorbency, sterile/non-sterile workflow, compatible hardware, and facility SOP.
About the Manufacturer:
Teknipure develops contamination-control products for cleanrooms and other critical and controlled environments. The TekniMop™ platform combines specialized mop frames, interchangeable handles, and application-specific mop covers to create configurable cleaning systems for pharmaceutical and biologics manufacturing, medical device production, semiconductor and microelectronics manufacturing, optics, aerospace and defense, compounding pharmacies, laboratories, and other controlled environments.
Within the TekniMop™ mop-cover family, Teknipure offers polyester, microfiber, and microdenier constructions designed around different cleaning objectives. Microdenier options emphasize high surface contact and contamination capture, while integrated-pad designs add absorbency and cushioning without requiring a separate pad component.
TM-MD47 Features:
- Microdenier polyester cleaning surface
- 4" x 7" format for small-surface cleaning
- Integrated absorbent pad
- Pad enclosed within the cover to reduce direct particle generation from the pad material
- Elastic edge for quick and secure installation
- High surface-contact area for enhanced particle and residue pickup
- Good absorbency and liquid retention
- Controlled disinfectant release for uniform surface wetting
- Compatible with IPA, sporicidal agents, and common cleanroom disinfectants
- Dry configuration allows facility-controlled chemistry selection
- Non-sterile format
- Compatible with the TKM47 TekniMop™ carbon fiber flat mop frame
TM-MD47 Benefits:
- Enhanced contamination pickup: Ultra-fine microdenier construction increases surface contact to support effective capture of particles, residues, and other contamination.
- Integrated-pad convenience: The built-in absorbent pad eliminates the need for a separate mop pad, simplifying setup and reducing the number of system components.
- Improved liquid handling: The absorbent pad provides additional fluid-holding capacity for disinfectant application, wet cleaning, and spill-control procedures.
- Controlled solution release: The cover is designed to distribute cleaning or disinfecting solution across the surface while maintaining consistent contact.
- Secure frame fit: Elastic edging helps keep the cover positioned securely on the compatible TKM47 frame during cleaning.
- Flexible chemistry selection: The dry format allows facilities to choose the cleaning or disinfecting chemistry and saturation level required by their SOP.
- Reduced component handling: Integrating the pad into the cover removes a separate assembly step and reduces an additional potential contamination source.
Common Applications:
- Cleaning isolators and RABS/BSC areas
- Cleaning gloveboxes and pass-through chambers
- Cleaning equipment surfaces, work surfaces, and benches
- Reaching confined and difficult-to-access areas
- Particle and residue removal
- Precleaning before disinfectant application
- Application of disinfectants and sanitizers
- Controlled surface wetting
- Spill control and liquid pickup
Best-Practice Use:
- Install securely: Fit the elastic cover fully over the compatible TKM47 frame so the integrated pad remains evenly positioned beneath the cleaning surface.
- Select the appropriate chemistry: Because TM-MD47 is supplied dry, apply the cleaning or disinfecting solution according to the chemistry manufacturer's instructions and facility SOP.
- Control saturation: Wet the cover and integrated pad sufficiently for the procedure without unnecessary oversaturation or dripping.
- Use controlled strokes: Follow the directional wiping or mopping pattern established by the facility and avoid moving contamination back into previously cleaned areas.
- Maintain surface contact: Allow the cushioned integrated pad and microdenier surface to maintain even contact rather than relying on excessive downward pressure.
- Observe required contact time: When applying disinfectants or sanitizers, maintain the required surface wetness and contact time specified by the chemistry manufacturer and facility procedure.
- Change covers as required: Replace the cover according to contamination load, room transition, surface area, chemistry condition, or other changeout criteria established by the facility.
- Follow non-sterile material controls: TM-MD47 is supplied non-sterile and should be introduced and used according to the facility's material-transfer and contamination-control procedures.
Selection Notes (TM-MD47 vs. Other TekniMop™ Options)
- TM-MD47: Choose this microdenier version when enhanced particle and residue pickup, high surface contact, and an integrated absorbent pad are priorities.
- TM-QP47: Select the 2-ply polyester cover when liquid retention, solution delivery, and general-purpose wet cleaning are the primary requirements.
- TM-PFM-47: Select the microfiber knit cover with integrated foam pad when a microfiber cleaning surface and cushioned contact are preferred.
- TM-PFM70G-47: Select the presaturated microfiber option when a ready-to-use 70% IPA configuration is preferred.
- Microdenier vs. 2-ply polyester: Microdenier emphasizes surface contact and contamination capture, while 2-ply polyester places greater emphasis on liquid handling and general wet-cleaning performance.
- Integrated pad vs. separate pad: TM-MD47 incorporates the absorbent pad into the cover itself, simplifying assembly and eliminating the need to source a separate pad.
Compatible TekniMop™ Products
Compatible Carbon Fiber Frame
- TKM47: 4" x 7" carbon fiber flat mop frame for small-surface cleaning, equipment, isolators, RABS, and confined areas
Building a TM-MD47 TekniMop™ System
The TM-MD47 is the microdenier mop-cover component of a modular TekniMop™ small-surface cleaning system. Pair the cover with the compatible TKM47 carbon fiber frame and select a TekniMop™ carbon fiber handle according to the reach required for the cleaning procedure.
System configuration:
TM-MD47 Microdenier Mop Cover with Integrated Pad + TKM47 Carbon Fiber Frame + Compatible TekniMop™ Carbon Fiber Handle
Select the handle according to required reach and operator position, then apply the cleaning chemistry and saturation level appropriate for the surface, contamination type, and facility procedure.
Workflow note: TM-MD47 is supplied dry and non-sterile. The integrated pad is already built into the cover, so no separate mop pad is required. Cleaning chemistry, saturation, material transfer, cover changeout, use, and disposal should follow the applicable facility SOP.
Notes: Looking for application guidance or qualification context for the Teknipure TM-MD47 TekniMop™ Microdenier Mop Cover with Integrated Pad? Open the SOSCleanroom Technical Vault tab above for detailed small-surface cleaning guidance, microdenier material selection, mop-cover changeout considerations, system configuration, cleaning technique, chemistry application, and compatibility information.
SOSCleanroom.com supports contamination-control programs with cleanroom mop covers, frames, handles, cleaning solutions, and critical-environment consumables backed by responsive product support and reliable supply.
Product page updated: Oct. 26, 2026 (SOS Technical Staff)
© 2026 Specialty Optical Systems, Inc. (dba SOSCleanroom) All rights reserved.
