Texwipe TX1067 TechniSat® 7" x 11" Cellulose/Polyester Cleanroom Wipers - Pre-Wetted 70% IPA / 30% DIW - 800 Wipers/Case
Texwipe TX1067 TechniSat® is a non-sterile, pre-wetted cleanroom wiper manufactured from a hydroentangled nonwoven blend of 55% cellulose and 45% polyester. Designed for routine cleaning in controlled environments, TX1067 combines the liquid sorption characteristics of cellulose with the added mechanical strength of polyester to support consistent wiping of compatible work surfaces, manufacturing equipment, tools, fixtures, and production accessories.
Each nominal 7" x 11" wiper features a cut-edge construction and is factory pre-wetted with 70% USP-grade isopropyl alcohol (IPA) and 30% deionized water (DIW). The manufacturer-prepared wetting solution is filtered to 0.2 µm. This ready-to-use formulation reduces the need for manual alcohol dilution, separate spray bottles, and uncontrolled wetting of dry wipes at the point of use.
The TechniCloth® nonwoven material combines absorbency, strength, and softness for general cleanroom wiping. Its hydroentangled cellulose/polyester construction is designed to provide low levels of particles and extractables while maintaining sufficient durability for compatible routine cleaning operations. The blended substrate helps collect light surface soils, handling residues, lubricants, and processing aids when used with an approved cleaning procedure.
TX1067's 7" x 11" dimensions provide a practical balance between surface coverage and handling. Compared with smaller wipes, the extended length supports efficient wiping of benches, equipment exteriors, carts, and workstations. The 7" width also makes the material convenient to fold and control around compatible equipment features, fixtures, and intermediate-sized work areas.
Texwipe identifies TX1067 for ISO Classes 5 through 8 and EU GMP Grades B through D. The product is supplied non-sterile and must be evaluated against facility-specific cleanliness, contamination-control, chemical-compatibility, and wiping requirements before use in a qualified manufacturing process.
TX1067 is packaged in reclosable slider bags containing 200 pre-wetted wipers each. One manufacturer case contains 4 slider bags, totaling 800 individual wipers. SOSCleanroom offers TX1067 by the complete manufacturer case. The reclosable bag helps reduce IPA evaporation and protect unused wipes during normal dispensing when properly closed after use.
Ready-to-Use Cleaning Advantage: TX1067 combines a 55% cellulose / 45% polyester nonwoven substrate, factory-prepared USP-grade 70% IPA / 30% DIW, and a convenient 7" x 11" format. Its 200-count reclosable slider bags provide consistent point-of-use wiping without requiring operators to prepare separate alcohol solutions or manually wet dry wipes.
Specifications:
- Manufacturer: Texwipe, an ITW company
- Manufacturer Part Number: TX1067
- SOSCleanroom SKU: TX1067 CASE
- Product Family: TechniSat®
- Substrate Family: TechniCloth®
- Product Type: Non-Sterile Pre-Wetted Cleanroom Wiper
- Material Composition: 55% cellulose / 45% polyester
- Construction: Hydroentangled nonwoven
- Edge Treatment: Cut edge
- Sealed Border: No
- Color: White
- Nominal Wiper Size: 7" x 11" (18 cm x 28 cm)
- Wetting Solution: 70% isopropyl alcohol / 30% deionized water
- IPA Grade: USP grade
- Solution Filtration: 0.2 µm
- Presentation: Factory pre-wetted and ready to use
- Quantitative Solvent Loading: No individual mL-per-wiper loading specified in the reviewed TDS
- Sterility: Non-sterile
- Manufacturer Cleanroom Classification: ISO Classes 5-8
- Traditional Cleanroom Classes: Class 100-100,000
- EU GMP Environment: Grades B-D, subject to facility qualification
- Published Cleanliness Characteristics: Typical particle, fiber, ionic, and nonvolatile-residue measurements
- Typical Sorptive Capacity: 360 mL/m²
- Typical Sorptive Rate: Less than 0.3 seconds
- Typical Basis Weight: 69 g/m²
- Packaging Format: Reclosable slider bag
- Wipers per Slider Bag: 200
- Slider Bags per Manufacturer Case: 4
- Total Wipers per Case: 800
- SOSCleanroom Selling Unit: Case only
- Manufacturer Lot Identification: Lot coded
- Published Shelf Life: 3 years from date of manufacture
- Country of Manufacture: USA
- Manufacturer Quality Registration: ISO 9001:2015
- Primary Application: General controlled-environment surface cleaning
- Use Classification: Disposable, single-use wiper
- Disinfectant Status: No independently established registered disinfectant or sporicidal claim
- Manufacturer Technical Reference: US-TDS-003 Rev. 4/23
Packaging and Case-Only Configuration:
Texwipe TX1067 is packaged in reclosable slider bags containing 200 pre-wetted wipes. The high-count bags help support repetitive cleaning operations while providing a convenient dispensing format for use throughout an approved cleaning shift or work process.
The current manufacturer case contains four individually reclosable bags for a total of 800 wipes. SOSCleanroom's online purchasing configuration is for the complete manufacturer case, rather than an individual 200-count bag.
| Packaging Level |
Quantity |
Description |
| Inner Slider Bag |
200 wipers |
Reclosable bag for controlled dispensing |
| Manufacturer Case |
4 slider bags |
Standard full-case packaging |
| Total Case Contents |
800 wipers |
4 bags x 200 wipers |
| SOSCleanroom Order Unit |
1 case |
Manufacturer case containing all 800 wipes |
The slider closure helps reduce evaporation of the IPA/DIW wetting solution. After dispensing the required number of wipes, operators should completely close the bag and maintain the product under its approved storage and in-use conditions.
Case-Only Ordering Confirmation: TX1067 CASE contains 4 reclosable slider bags of 200 wipes each, totaling 800 wipes. The 200-wipe quantity describes one inner bag; the SOSCleanroom online purchasing unit is the complete 800-wipe manufacturer case.
About the Manufacturer:
Texwipe, an ITW company, manufactures cleanroom wipers, swabs, pre-wetted cleaning products, cleaning-validation supplies, and contamination-control consumables for pharmaceutical manufacturing, biotechnology, medical devices, semiconductor processing, laboratories, and other controlled environments.
Texwipe's TechniCloth® material combines cellulose absorbency with polyester strength in a nonwoven substrate suitable for general controlled-environment wiping. TechniSat® incorporates factory-prepared IPA/DIW solutions into this substrate, providing a ready-to-use product intended to help standardize solvent application.
SOSCleanroom is an authorized Texwipe distributor, providing manufacturer technical resources, cleanroom wiper selection assistance, packaging information, and procurement support for contamination-controlled facilities.
TX1067 Features:
- 55% cellulose / 45% polyester substrate
- Hydroentangled nonwoven construction
- Cut-edge wiping material
- 7" x 11" nominal dimensions
- Soft and absorbent material for general cleaning
- Cellulose liquid sorption with polyester reinforcement
- Manufactured to provide low particle and extractables levels
- Factory pre-wetted with 70% USP-grade IPA / 30% DIW
- 0.2 µm filtered wetting solution
- Ready-to-use cleaning presentation
- Non-sterile product configuration
- Manufacturer positioning for ISO Classes 5-8
- EU GMP Grades B-D environmental positioning
- Consistent wetness and VOC-control design
- Reduced need for manual IPA dilution and mixing
- Reclosable slider-bag dispenser
- Controlled point-of-use wipe dispensing
- Manufacturer lot identification
- Three-year published shelf life
- Made in the USA
- 200 pre-wetted wipes per slider bag
- 4 slider bags per case
- 800 wipes per manufacturer case
- Case-only purchasing through SOSCleanroom
TX1067 Benefits:
- Absorbent Cellulose/Polyester Blend: Combines liquid pickup properties with added material strength during appropriate wiping operations.
- Convenient 7" x 11" Dimensions: Provides useful surface coverage without requiring the larger width of a 9" x 11" wiper.
- Consistent IPA Formulation: Manufacturer-prepared 70% IPA / 30% DIW reduces variability associated with manual dilution.
- Reduced Solvent Preparation: Eliminates routine mixing and individual wetting of dry wipes.
- Controlled Wetness: Factory pre-wetting helps provide repeatable wipe condition when properly stored and dispensed.
- Reduced Open-Solvent Handling: Pre-wetted wipes minimize the need to pour or spray alcohol onto work surfaces.
- Less Overspray: Cleaning solution is applied through the wipe to the intended surface.
- Durable Nonwoven Construction: Hydroentangled fibers support strength during normal cleaning.
- Convenient High-Count Bags: Each slider bag contains 200 wipes for repetitive cleaning operations.
- Evaporation Management: Promptly closing the package helps protect the wetness of unused wipes.
- Controlled Surface Contact: Wipes can be folded and handled using a defined cleaning pattern.
- General Residue Removal: Suitable for removing compatible light soils, lubricants, and processing aids.
- Traceability: Manufacturer lot identification supports inventory and material-use records.
- Convenient Procurement: The 800-wipe manufacturer case provides a defined purchasing unit for recurring operations.
Common Applications:
- Routine cleanroom bench and workstation cleaning
- Wiping compatible manufacturing equipment exteriors
- Cleaning laboratory benches and equipment surfaces
- Removing compatible handling residues and light soils
- Wiping cleanroom carts, fixtures, and material-handling accessories
- General cleaning in qualified ISO Classes 5-8 environments
- Cleaning equipment between approved production steps
- Wiping tools and accessories before controlled-area introduction
- Removal of compatible lubricants and processing aids
- Cleaning pass-through accessories and staging surfaces
- Pharmaceutical and biotechnology support-area cleaning
- Medical device manufacturing work surface wiping
- General semiconductor and electronics support-area cleaning where suitable
- Controlled application of IPA to approved surfaces
- Wiping medium-sized components and fixtures
- Routine equipment maintenance cleaning using a pre-wetted solution
- Approved environmental surface cleaning in controlled manufacturing facilities
Cellulose/Polyester Material Construction:
TX1067 uses a hydroentangled nonwoven substrate consisting of 55% cellulose and 45% polyester. The blend is designed to combine useful liquid sorption with the durability of a synthetic component, supporting general wiping and compatible residue collection.
- 55% Cellulose: Contributes absorbency and liquid pickup capability.
- 45% Polyester: Adds fabric strength and durability during ordinary wiping.
- Hydroentangled Nonwoven: Mechanically entangled fibers form the wiping material.
- Cut-Edge Construction: Suitable for general wiping but does not offer sealed-border fiber containment.
- Soft Surface Contact: Supports wiping compatible equipment and environmental surfaces.
- Liquid Sorption: The blended substrate is useful for collecting compatible liquids and light soils.
- Particle and Extractables Control: Manufactured to provide low contamination contribution for its intended general-cleaning applications.
- Fiber Considerations: Cellulose-blend materials may not meet the most stringent fiber limits required for some highly critical processes.
- Surface Suitability: Evaluate the substrate and solvent chemistry against the intended surface and residue.
- Critical Wiping: Consider a qualified sealed-border polyester alternative when the process requires tighter particle and fiber control.
Material Selection Guidance: TX1067 is an absorbent cellulose/polyester cut-edge wiper. It is intended for general controlled-environment cleaning and should not automatically be substituted for sealed-border polyester or other specialized wipers in processes with exceptionally stringent particle, fiber, or residue acceptance limits.
70% USP-Grade IPA / 30% DIW Wetting Chemistry:
TX1067 is factory pre-wetted with USP-grade 70% isopropyl alcohol and 30% deionized water. Texwipe identifies the wetting solution as filtered to 0.2 µm and designed to provide repeatable wetness and solvent characteristics under appropriate handling conditions.
- 70% IPA: Supports removal of compatible processing soils, lubricants, and light residues.
- 30% DIW: Provides the water component of the formulated cleaning solution.
- USP-Grade Alcohol: Explicitly identified by Texwipe for TX1067.
- 0.2 µm Filtration: Used in preparation of the wetting solution.
- Factory Pre-Wetting: Helps standardize chemistry and avoid operator-to-operator dilution differences.
- Consistent Wetness: Designed to help maintain repeatable solvent application during approved use.
- Reduced Free-Liquid Handling: Limits separate solvent pouring or spraying.
- Quantitative Solvent Loading: The reviewed TDS does not provide an exact mL-per-wipe value for TX1067.
- IPA Evaporation: Improperly closed bags and prolonged exposure can reduce wetness.
- Surface Compatibility: Evaluate coatings, plastics, adhesives, labels, and sensitive materials before wiping.
- Non-Sterile Supply: Filtering the wetting solution does not make the finished wiper sterile.
- Disinfection: The nominal 70% IPA concentration does not independently establish product-specific registered disinfectant efficacy or validated contact times.
- Sporicidal Activity: A separately qualified sporicidal product is required when specified.
Chemistry Guidance: Texwipe confirms TX1067 uses USP-grade 70% IPA / 30% DIW filtered to 0.2 µm. The product is non-sterile, and the reviewed manufacturer TDS does not establish a fixed solvent-loading volume per wipe. Always follow the facility's approved chemistry, cleaning, and disinfection requirements.
Best-Practice Wiping Procedure:
TX1067 supports repeatable cleaning when operators follow an approved procedure defining wipe handling, contact pressure, wiping direction, surface coverage, and replacement frequency. Proper use also helps minimize contamination transfer between cleaned and uncleaned areas.
- Verify Product Suitability: Confirm that TX1067 is approved for the cleaning surface, ISO classification, and procedure.
- Inspect the Bag: Verify the correct part number, lot identification, expiration date, and package integrity.
- Prepare the Work Area: Follow the approved cleaning sequence and required contamination-control procedures.
- Use Appropriate Gloves: Wear the required cleanroom gloves and task-specific protective equipment.
- Open the Slider Bag: Open only as far as needed to remove the appropriate number of wipes.
- Dispense Carefully: Avoid touching the remaining unused wipers with contaminated gloves or equipment.
- Reseal Immediately: Close the slider to help preserve the remaining solution and protect the bag contents.
- Fold the Wiper: Create manageable wiping faces when the approved procedure permits.
- Apply Controlled Strokes: Wipe in straight, overlapping passes according to the specified cleaning direction.
- Maintain Consistent Pressure: Avoid unnecessary scrubbing or aggressive abrasion.
- Rotate Wiping Faces: Use a clean portion of the wipe to reduce redeposition of collected contamination.
- Replace When Necessary: Discard wipes that become soiled, damaged, dry, or unsuitable for continued cleaning.
- Do Not Reuse: Never return a used wipe to the original bag.
- Complete Cleaning Records: Document material lot information and cleaning activity as required.
Wiping Guidance: Factory-prepared pre-wetted wipes reduce solvent preparation steps, but effective surface cleaning still depends on approved wiping direction, coverage, wipe-change practices, and proper package handling. Replace used wipes before contamination is redistributed.
Reclosable Slider-Bag Handling and Evaporation Control:
The TX1067 reclosable slider bag helps reduce evaporation of the IPA/DIW cleaning solution. Proper storage and dispensing are important for preserving wetness across the life of an opened package.
- Open Only When Needed: Limit unnecessary exposure of unused wipes.
- Close the Slider Completely: Check the full length of the closure after dispensing.
- Protect the Bag Opening: Avoid contaminated gloves, tools, surfaces, and splashes.
- Limit Heat Exposure: Do not place open or closed packs near excessive heat or ignition sources.
- Inspect Wipe Wetness: Discard inadequately wetted material when a consistent pre-wet condition is required.
- Do Not Add Solvent Without Approval: Adding liquid can alter the original manufacturer-prepared condition.
- Observe In-Use Limits: Follow facility requirements for opened-bag handling and replacement.
- Preserve Lot Identification: Keep the packaging label available when material traceability is required.
- Store Appropriately: Follow the current manufacturer SDS and applicable flammable-material storage requirements.
Packaging Guidance: Reclosable slider bags help preserve pre-wetted condition but do not prevent all solvent loss after opening. Prompt closure, appropriate storage, and approved open-package limits are necessary for consistent use.
Typical Particle, Fiber, Ionic and Extractables Performance:
Texwipe publishes typical laboratory performance measurements for the TechniCloth® material used in TechniSat® wipers. These measurements assist material selection but are not certified lot-specific TX1067 acceptance limits.
| Typical Manufacturer Characteristic |
Reported Value |
| Particles ≥0.5 µm |
72 x 106 particles/m² |
| Fibers >100 µm |
55,000 fibers/m² |
| Nonvolatile Residue - IPA Extractant |
0.01 g/m² |
| Nonvolatile Residue - DIW Extractant |
0.03 g/m² |
| Nonvolatile Residue - Ethanol Extractant |
0.01 g/m² |
| Sodium |
12 ppm |
| Potassium |
1 ppm |
| Chloride |
10 ppm |
| Sorptive Capacity |
360 mL/m² |
| Sorptive Rate |
Less than 0.3 seconds |
| Basis Weight |
69 g/m² |
These values represent manufacturer-reported typical analyses using the applicable Texwipe testing methods. The analytical data characterize the substrate and should not be represented as guaranteed performance limits for every TX1067 production lot.
Performance Data Guidance: Typical particle, fiber, ionic, sorption, and residue results help guide wiper selection but do not establish the cleanliness of a specific finished surface. For critical applications, qualify the wiper under the facility's applicable analytical and cleaning acceptance requirements.
Selection Notes: TX1067 vs. Other TechniSat® Wipers:
Texwipe offers multiple TechniSat® formats using the same cellulose/polyester substrate family. Dimensions, solvent formulation, dispensing format, and case quantity vary between products.
| Product |
Size |
Pre-Wet Chemistry |
Manufacturer Packaging |
| TX1045 |
6" x 8" |
70% IPA / 30% DIW |
100/bag; 12 bags/case; 1,200 wipes |
| TX1067 |
7" x 11" |
70% USP-grade IPA / 30% DIW |
200/bag; 4 bags/case; 800 wipes |
| TX1041 |
9" x 11" |
70% IPA / 30% DIW |
70/bag; 12 bags/case; 840 wipes |
| TX1065 |
9" x 11" |
70% USP-grade IPA / 30% DIW |
50/flexpack; 20 packs/case; 1,000 wipes |
| TX1048 |
8" x 5" |
6% IPA / 94% DIW |
210/refill pack; 12 refills plus tub/case |
- Choose TX1067: When a 7" x 11" pre-wetted wiper and high-count 200-wipe slider bags are preferred.
- Choose TX1045: When the procedure requires a smaller 6" x 8" wipe.
- Choose TX1041: When a larger 9" x 11" wipe supplied in 70-count reclosable bags is appropriate.
- Choose TX1065: When 9" x 11" dimensions and smaller 50-count flexpacks better suit the application.
- Choose TX1048: When the cleaning procedure specifically calls for 6% IPA rather than 70% IPA.
- Check IPA Grade: The current manufacturer TDS distinguishes semiconductor-grade IPA used for TX1045 from USP-grade IPA used for TX1067, TX1041, and TX1065.
- Verify Packaging: Similar substrate and chemistry do not indicate identical bag or case quantities.
- Evaluate Sterility: Non-sterile TechniSat® must not replace a sterile wiping product without approved process qualification.
Selection Guidance: TX1067 is a non-sterile 7" x 11" TechniSat® wiper with 70% USP-grade IPA / 30% DIW and 200 wipers per slider bag. Other TechniSat® variants may differ in dimensions, IPA grade, concentration, dispensing format, and case quantity. Confirm the complete specification before substituting an approved product.
Safety and Chemical Compatibility:
TX1067 contains isopropyl alcohol, a flammable solvent. Appropriate chemical safety precautions, surface compatibility checks, storage procedures, and disposal requirements must be followed when using or handling the product.
- Flammability: Keep away from ignition sources, open flames, sparks, and excessive heat.
- Ventilation: Follow workplace controls for alcohol vapor exposure.
- Personal Protective Equipment: Use gloves, eye protection, and other protective equipment required by the task and applicable SDS.
- Surface Compatibility: Evaluate IPA-sensitive coatings, plastics, adhesives, labels, and finishes before wiping.
- Electrical Equipment: Follow the equipment manufacturer's approved cleaning and electrical safety procedures.
- Material Shedding: Evaluate cellulose/polyester cut-edge construction against applicable particle and fiber-control requirements.
- Non-Sterile Supply: Do not substitute TX1067 for a sterile wiping consumable where sterile material is specified.
- Disinfection: Do not infer registered disinfectant efficacy or a universal wet contact time from the 70% IPA concentration alone.
- Sporicidal Requirements: Use a separately qualified sporicide when the cleaning program requires it.
- Hazardous Drug Residues: Do not assume IPA wiping alone provides validated hazardous-drug deactivation or decontamination.
- Shipping: Observe applicable current dangerous-goods classifications, package quantities, transportation modes, and carrier restrictions.
- Waste Disposal: Follow approved requirements for used alcohol-containing wipes and contaminated materials.
Safety Guidance: TX1067 is non-sterile and pre-wetted with flammable 70% IPA. Confirm compatibility with the intended surface and use the current manufacturer Safety Data Sheet and approved facility procedures. Its wetting chemistry does not independently establish registered disinfectant or sporicidal performance.
Shelf Life, Storage and Disposal:
- Manufacturer Part Number: TX1067
- SOSCleanroom SKU: TX1067 CASE
- Inner Packaging: 200 pre-wetted wipes per reclosable slider bag
- Manufacturer Case: 4 bags / 800 wipes
- Purchasing Unit: Complete manufacturer case
- Supplied Sterility: Non-sterile
- Published Shelf Life: 3 years from manufacture
- Expiration: Follow manufacturer packaging identification
- Traceability: Manufacturer lot coded
- Bag Condition: Inspect for damage, leakage, or compromised closure
- Storage Environment: Follow manufacturer recommendations and the applicable product SDS
- Flammable-Material Controls: Keep away from flames, sparks, and excessive heat
- Controlled-Area Introduction: Follow the facility's approved material-transfer procedure
- Dispensing: Avoid unnecessary contact with unused wipers
- Evaporation Control: Close the slider bag promptly after dispensing
- Opened-Bag Use: Follow applicable facility in-use and replacement requirements
- Wiper Condition: Discard dried, soiled, damaged, or otherwise compromised material
- Reuse: Single use only
- Disposal: Follow approved solvent-containing waste procedures
Manufacturer Technical Documents:
Other Similar Products Available From SOSCleanroom.com
TechniSat® Pre-Wetted and TechniCloth® Dry Wiper Alternatives
Notes: Need assistance comparing TechniSat® sizes, confirming TX1067 manufacturer case quantities, or selecting a pre-wetted cellulose/polyester cleanroom wiper? SOSCleanroom provides product selection assistance, manufacturer technical resources, packaging information, and procurement support.
SOSCleanroom.com supports pharmaceutical, biotechnology, medical device, semiconductor, laboratory, and other controlled environments with cleanroom wipers, pre-wetted cleaning products, protective apparel, and contamination-control supplies.
Product description updated: November 3, 2026 (SOS Technical Staff)
© 2026 SOS Supply. All rights reserved.
