Teknipure TM-MFP-516P-ST TekniMop Sterile Microfiber Knit Pocket Mop Cover, Integrated Pad, 5″x16″ (Refills) (Case Qty.)

Teknipure TM-MFP-516P-ST TekniMop Sterile Microfiber Knit Pocket Mop Cover, Integrated Pad, 5″x16″ (Refills) (Case Qty.) - SOSCleanroom Standard Specification

The Teknipure TM-MFP-516P-ST TekniMop™ Sterile Microfiber Knit Pocket Mop Cover is a dry, sterile cleanroom mop cover with an integrated absorbent pad designed for large-surface cleaning in pharmaceutical, biotech, and other critical environments. Its knit microfiber cleaning surface supports effective capture and retention of small particles and contaminants, while the integrated pad provides increased absorbency, liquid retention, and controlled solution release without requiring a separate mop pad.

• Part Number: TM-MFP-516P-ST
• Product Type: Sterile microfiber knit pocket mop cover with integrated absorbent pad
• Size: 5" x 16"
• Material: Knit microfiber
• Pad: Integrated absorbent pad
• Attachment: Pocket-style
• Format: Dry
• Sterility: Sterile
• Sterilization Method: Gamma irradiation
• Sterility Assurance Level: SAL 10^-6
• Sterility Validation: Validated according to AAMI guidelines
• Cleanroom Environment: Designed for applications in ISO Class 5–8 environments as specified by Teknipure
• Packaging: 1 cover/bag, 5 bags/pack, 10 packs/case
• Total Case Quantity: 50 covers/case
• Compatible Hardware: Designed for TekniMop™ 5" x 16" frame systems; TM-PFM516HF is directly listed by Teknipure

TM-MFP-516P-ST is designed for sterile large-surface cleaning where facilities require a sterile mop cover while retaining control over the cleaning or disinfecting chemistry applied at the point of use. Its 5" x 16" format provides practical coverage for floors, walls, ceilings, large equipment surfaces, and other broad controlled-environment areas.

The knit microfiber cleaning surface supports capture and retention of small particles and contaminants, while the integrated absorbent pad provides additional liquid capacity and controlled solution release. Because the pad is built into the cover and enclosed on all sides, no separate pad component is required during system setup.

TM-MFP-516P-ST is supplied sterile and dry. Final suitability should be evaluated according to the target surface, cleaning chemistry, contamination-control objective, required saturation level, sterile material-flow requirements, compatible hardware, validated cleaning procedure, and facility SOP.

Teknipure develops contamination-control products for cleanrooms and other critical and controlled environments. The TekniMop™ platform combines specialized mop frames, handles, and application-specific mop covers to create configurable cleaning systems for pharmaceutical and biologics manufacturing, medical device production, compounding pharmacies, laboratories, and other controlled environments.

Within the TekniMop™ microfiber mop-cover family, Teknipure offers dry, presaturated, sterile, and non-sterile configurations. Integrated-pad constructions combine the microfiber cleaning surface and absorbent layer into a single cover to simplify setup and support controlled liquid management during cleaning procedures.

• High-density knit microfiber cleaning surface
• 5" x 16" format for large-surface controlled-environment cleaning
• Integrated absorbent pad for increased liquid capacity
• Pad covered on all sides to eliminate particle generation from exposed pad material
• Pocket-style construction for quick and easy cover changes
• No separate mop pad required
• Microfiber material captures and retains small particles and contaminants
• Good absorbency and liquid retention for spill control and disinfectant application
• Dry format allows facility-controlled chemistry selection and saturation
• Compatible with IPA and common cleanroom disinfectants
• Gamma irradiated for sterile cleaning applications
• Sterility assurance level (SAL) of 10^-6
• Sterility validated according to AAMI guidelines

• Sterility assurance: Gamma irradiation to an SAL of 10^-6 supports cleaning programs requiring sterile consumables.
• Effective contamination pickup: Knit microfiber construction provides high surface contact to support capture and retention of small particles and contaminants.
• Integrated-pad convenience: The built-in absorbent pad eliminates the need to purchase, install, and manage a separate mop pad.
• Increased fluid capacity: The integrated pad provides additional liquid-holding capacity for wet-cleaning, disinfectant-application, and spill-control procedures.
• Flexible sterile chemistry selection: The dry format allows facilities to select the cleaning or disinfecting chemistry required by the validated sterile cleaning procedure.
• Controlled saturation: Operators can establish the required wetness level rather than relying on a predetermined factory-presaturated amount.
• Controlled solution release: The integrated pad supports consistent liquid retention and release during surface cleaning.
• Large-area efficiency: The 5" x 16" footprint provides practical coverage for floors, walls, ceilings, equipment surfaces, and other broad areas.
• Reduced component handling: Integrating the absorbent pad into the cover removes a separate assembly step and reduces the number of components handled in the cleaning workflow.

• Sterile cleanroom floor cleaning
• Wall cleaning
• Ceiling cleaning
• Large equipment and facility surfaces
• Application of disinfectants and sanitizers
• Particle and residue removal
• Controlled surface wetting
• Spill control and liquid pickup
• General cleaning of large sterile and controlled-environment areas

• Maintain sterile handling: Introduce and handle the sterile cover according to the facility's material-transfer, aseptic handling, and contamination-control procedures.
• Install securely: Fit the pocket-style cover fully onto compatible 5" x 16" mop hardware so the integrated absorbent pad remains evenly positioned beneath the microfiber cleaning surface.
• Select the appropriate chemistry: Because TM-MFP-516P-ST is supplied dry, apply the cleaning or disinfecting solution according to the chemistry manufacturer's instructions and facility SOP.
• Control saturation: Wet the microfiber surface and integrated pad sufficiently for the procedure without unnecessary oversaturation, dripping, or excessive solution deposition.
• Use controlled cleaning patterns: Follow the unidirectional, overlapping, or other validated mopping pattern established by the facility for the surface being cleaned.
• Work from cleaner to less-clean areas: Follow the facility's established contamination-control sequence and avoid moving collected contamination back into previously cleaned areas.
• Observe required contact time: When applying disinfectants or sanitizers, maintain the required surface wetness and contact time specified by the chemistry manufacturer and facility procedure.
• Change covers as required: Replace the cover according to surface area, contamination load, room transition, chemistry condition, or other changeout criteria established by the facility.

• TM-MFP-516P-ST: Choose this version when a sterile, dry 5" x 16" microfiber cover with an integrated absorbent pad is required and the facility needs direct control over cleaning chemistry and saturation.
• TM-MFP-516P: Select the dry, non-sterile 5" x 16" microfiber version when sterile presentation is not required.
• TM-MFP9G-516P: Select the non-sterile 9% IPA presaturated version when standardized ready-to-use IPA delivery is preferred.
• TM-MFPK-516P: Select the dry, non-sterile integrated-pad microfiber version when sterile presentation is not required.
• TM-MFPK9G-516P: Select the 9% IPA presaturated integrated-pad version when ready-to-use chemistry and increased liquid capacity are desired.
• Sterile dry vs. presaturated: TM-MFP-516P-ST provides chemistry flexibility while maintaining sterile presentation; presaturated alternatives reduce point-of-use preparation when their supplied chemistry matches the validated procedure.

Directly Listed Compatible Mop System

• TM-PFM516HF: 5" x 16" polyethylene frame with extendable aluminum handle

The TM-MFP-516P-ST is the sterile dry microfiber integrated-pad mop-cover component of a TekniMop™ large-surface cleaning system. Pair the cover with compatible 5" x 16" mop hardware and prepare it with the cleaning chemistry and saturation level required by the validated sterile cleaning procedure.

Workflow note: TM-MFP-516P-ST is supplied sterile and dry. Sterile material transfer, package opening, solution application, cover changeout, surface wetting, use, and disposal should follow the facility's validated cleaning and contamination-control procedures.

Notes: Looking for application guidance or qualification context for the Teknipure TM-MFP-516P-ST TekniMop™ Sterile Microfiber Knit Pocket Mop Cover with Integrated Pad? Open the SOSCleanroom Technical Vault tab above for detailed sterile large-surface cleaning guidance, microfiber mop-cover selection, integrated-pad considerations, chemistry application, system configuration, cover changeout considerations, and compatibility information.

SOSCleanroom.com supports contamination-control programs with cleanroom mop covers, frames, handles, cleaning solutions, and critical-environment consumables backed by responsive product support and reliable supply.

Product page updated: Oct. 28, 2026 (SOS Technical Staff)

© 2026 Specialty Optical Systems, Inc. (dba SOSCleanroom) All rights reserved.