Skip to main content
Teknipure TM-QP70G-258 TekniMop 2Ply Polyester Pocket Mop Cover, 2.5″ x 8″, 70% IPA (Refills) (Case Qty.)

Teknipure TM-QP70G-258 TekniMop 2Ply Polyester Pocket Mop Cover, 2.5″ x 8″, 70% IPA (Refills) (Case Qty.)

$432.67
SKU: TM-QP70G-258-CA 7 - 10 Business Days
(No reviews yet)
Availability:
7 - 10 Business Days
Shipping:
Calculated at Checkout
Type:
Pre-Wet Mop

Teknipure TM-QP70G-258 TekniMop 2Ply Polyester Pocket Mop Cover, 2.5″ x 8″, 70% IPA (Refills) (Case Qty.) - SOSCleanroom Standard Specification

The Teknipure TM-QP70G-258 TekniMop™ 2-Ply Polyester Pocket Mop Cover is a non-sterile, ready-to-use cleanroom mop cover presaturated with 70% isopropyl alcohol (IPA). Designed for small-surface and isolator cleaning, its 2-ply polyester construction provides reliable liquid retention and controlled solution release while factory presaturation helps deliver a consistent IPA wetness level without manual measuring, spraying, or saturation before use.

Ready-to-use 70% IPA format: TM-QP70G-258 combines a compact 2.5" x 8" pocket design with durable 2-ply polyester and standardized 70% IPA presaturation. Each resealable gusset bag contains 15 covers and is designed to help reduce chemical evaporation while maintaining consistent mop saturation throughout use.

Specifications:
  • Part Number: TM-QP70G-258
  • Product Type: Presaturated pocket mop cover
  • Size: 2.5" x 8"
  • Material: 2-ply polyester
  • Solution: 70% isopropyl alcohol (IPA)
  • Format: Presaturated
  • Sterility: Non-sterile
  • Cleanroom Environment: Designed for applications in ISO Class 5–8 environments as specified by Teknipure
  • Packaging: 15 covers/resealable gusset bag, 10 bags/case
  • Total Case Quantity: 150 covers/case
  • Compatible Carbon Fiber Frame: TKM27
  • Compatible Stainless Steel System: TM-QP258-SS 2.5" x 8" flat mop frame and extendable handle
Where TM-QP70G-258 Fits in Controlled Environments

TM-QP70G-258 is designed for small-surface cleaning applications where a ready-to-use 70% IPA format can simplify solution preparation and provide consistent saturation from cover to cover. Teknipure identifies applications including isolators, RABS/BSC areas, gloveboxes, pass-through chambers, equipment surfaces, work surfaces, benches, and other confined or difficult-to-access areas.

The 2-ply polyester construction provides liquid retention and controlled release to support uniform surface wetting. Factory presaturation eliminates the need to manually measure or spray IPA onto each mop cover before use, helping standardize solution delivery during routine cleaning procedures.

Typical program fit: Isolator and RABS/BSC cleaning, gloveboxes, pass-through chambers, equipment and work surfaces, benches, confined areas, precleaning, residue removal, sanitizer application, controlled surface wetting, and spill-control procedures.

TM-QP70G-258 is supplied presaturated with 70% IPA and is non-sterile. Suitability for a particular cleaning process should be evaluated according to the target surface, required chemistry, contamination-control objective, validated cleaning procedure, and facility SOP.

About the Manufacturer:

Teknipure develops contamination-control products for cleanrooms and other critical and controlled environments. The TekniMop™ platform combines specialized mop frames, interchangeable handles, and application-specific mop covers to create configurable cleaning systems for pharmaceutical and biologics manufacturing, medical device production, compounding pharmacies, laboratories, and other controlled environments.

Within the TekniMop™ small-surface system, Teknipure offers dry, presaturated, sterile, and non-sterile 2-ply polyester mop-cover configurations. This allows facilities to select a format according to cleaning chemistry, sterility requirements, solution-delivery preferences, contamination-control objectives, and established procedures.

TM-QP70G-258 Features:
  • Durable 2-ply polyester knit construction
  • 2.5" x 8" pocket-style format for small-surface cleaning
  • Presaturated with 70% IPA
  • Ready-to-use format eliminates manual measuring or spraying before use
  • Consistent IPA wetness level for standardized solution delivery
  • Controlled liquid release for uniform surface wetting
  • Reliable liquid retention from thick 2-ply construction
  • Low particulate-generating polyester material
  • Self-standing resealable gusset bag
  • Resealable packaging helps reduce chemical evaporation and maintain mop saturation
  • Non-sterile configuration
  • Compatible with the TKM27 TekniMop™ carbon fiber flat mop frame
  • Compatible with the TM-QP258-SS stainless steel 2.5" x 8" mop system
TM-QP70G-258 Benefits:
  • Ready-to-use convenience: Factory presaturation with 70% IPA eliminates the need to manually measure, spray, or saturate individual covers before cleaning.
  • Consistent solution delivery: Standardized presaturation provides a consistent IPA wetness level for each cleaning cycle.
  • Controlled surface wetting: Thick 2-ply polyester construction retains liquid and releases solution across the target surface during cleaning.
  • Reduced evaporation during use: The resealable gusset bag helps limit IPA evaporation from unused covers after the package has been opened.
  • Convenient work-area packaging: The self-standing bag minimizes its footprint on work surfaces and provides convenient access to covers during cleaning.
  • Compact cleaning access: The 2.5" x 8" format supports cleaning of isolators, equipment, work surfaces, pass-throughs, and other areas where larger mop systems may be difficult to maneuver.
  • Low particulate generation: Durable 2-ply polyester knit construction is designed to minimize particle generation in controlled-environment cleaning.
  • Multiple hardware options: TM-QP70G-258 can be incorporated into compatible carbon fiber or stainless steel TekniMop™ small-surface cleaning configurations.
Common Applications:
  • Cleaning isolators and RABS/BSC areas
  • Cleaning gloveboxes and pass-through chambers
  • Cleaning equipment surfaces, work surfaces, and benches
  • Reaching confined and difficult-to-access areas
  • Precleaning before disinfectant application
  • Residue removal
  • 70% IPA application and controlled surface wetting
  • Sanitizing procedures where 70% IPA is the specified chemistry
  • Spill-control management
Best-Practice Use:
  • Select compatible hardware: Use TM-QP70G-258 with a manufacturer-listed compatible frame or mop system, such as the TKM27 carbon fiber frame or TM-QP258-SS stainless steel system.
  • Use directly from the presaturated package: The cover is supplied with 70% IPA and does not require manual IPA saturation before use.
  • Reseal the package: Close the resealable gusset bag after removing the required cover to help minimize IPA evaporation and maintain saturation of the remaining covers.
  • Use controlled strokes: Follow the directional wiping or mopping technique established by the facility and avoid transferring contamination back into previously cleaned areas.
  • Maintain surface contact: Keep the mop cover evenly engaged with the target surface to support uniform IPA delivery.
  • Allow appropriate wetting and drying: Follow the facility procedure for 70% IPA application and allow the treated surface to remain appropriately wetted and dry according to the established process.
  • Change covers as required: Replace the mop cover according to cleaning area, contamination load, solution condition, room transition, or other changeout criteria established by the facility.
  • Follow non-sterile material controls: TM-QP70G-258 is supplied non-sterile and should be introduced and used according to the facility's material-transfer and contamination-control procedures.
Selection Notes (TM-QP70G-258 vs. Other TekniMop™ Options)
  • TM-QP70G-258: Choose this version when a non-sterile, ready-to-use 2-ply polyester cover presaturated with 70% IPA is appropriate for the cleaning procedure.
  • TM-QP258: Select the dry, non-sterile version when the facility needs to choose its own cleaning chemistry or directly control the saturation level.
  • TM-QP258S: Select the sterile dry version when a sterile 2-ply polyester cover is required but the facility wants to control cleaning chemistry and saturation.
  • TM-QP70G-258S: Select the sterile 70% IPA version when both sterile presentation and ready-to-use IPA presaturation are required.
  • Dry vs. presaturated: Presaturated TM-QP70G-258 eliminates manual IPA preparation at the point of use and provides standardized solution delivery. Dry TM-QP258 provides greater flexibility when different cleaning chemistries are required.
  • 2-ply polyester vs. microfiber or microdenier: 2-ply polyester emphasizes liquid retention, controlled solution delivery, durability, and low particulate generation. Other TekniMop™ materials may be selected when the cleaning objective requires different surface-contact or contamination-removal characteristics.
Compatible TekniMop™ Products

Compatible Carbon Fiber Frame

  • TKM27: 2" x 7" carbon fiber flat mop frame for isolators, equipment, work surfaces, and confined cleaning areas

Compatible Stainless Steel System

  • TM-QP258-SS: 2.5" x 8" stainless steel flat mop frame with extendable handle
Building a TM-QP70G-258 TekniMop™ System

The TM-QP70G-258 is the presaturated disposable mop-cover component of a TekniMop™ small-surface cleaning system. When building a carbon fiber configuration, pair the cover with the compatible TKM27 frame and select a compatible TekniMop™ carbon fiber handle according to the reach required for the cleaning procedure.

Carbon fiber configuration:
TM-QP70G-258 70% IPA 2-Ply Polyester Mop Cover + TKM27 Carbon Fiber Frame + Compatible TekniMop™ Carbon Fiber Handle

Stainless steel configuration:
TM-QP70G-258 70% IPA 2-Ply Polyester Mop Cover + TM-QP258-SS Stainless Steel Frame & Extendable Handle System

Workflow note: TM-QP70G-258 is supplied ready to use with 70% IPA and is non-sterile. Keep the gusset bag resealed when covers are not being removed to help limit IPA evaporation. Material transfer, cover changeout, surface wetting, use, and disposal should follow the applicable cleaning procedure and facility SOP.

Notes: Looking for application guidance or qualification context for the Teknipure TM-QP70G-258 TekniMop™ 2-Ply Polyester Pocket Mop Cover? Open the SOSCleanroom Technical Vault tab above for detailed small-surface cleaning guidance, 70% IPA application considerations, mop-cover selection, system configuration, cleaning technique, compatibility information, and additional considerations for controlled-environment mopping.

SOSCleanroom.com supports contamination-control programs with cleanroom mop covers, frames, handles, cleaning solutions, and critical-environment consumables backed by responsive product support and reliable supply.

Product page updated: Oct. 26, 2026 (SOS Technical Staff)

© 2026 Specialty Optical Systems, Inc. (dba SOSCleanroom) All rights reserved.

The Technical Vault By SOSCleanroom
2-Ply Polyester Knit 2.5" x 8" 70% IPA Presaturated Pocket Mop Cover Non-Sterile ISO 5–8
Teknipure TekniMop™ TM-QP70G-258: a ready-to-use 70% IPA presaturated pocket cover for compact critical-surface cleaning

The Teknipure TekniMop™ TM-QP70G-258 is a 2.5" x 8" non-sterile 2-ply polyester knit pocket mop cover presaturated with 70% isopropyl alcohol (IPA). Designed for pharmaceutical, medical-device, biotech, compounding, laboratory, and other controlled-environment cleaning applications, the presaturated configuration eliminates manual IPA measuring or spraying while providing a consistent wetness level from a ready-to-use mop cover.

Operations takeaway: TM-QP70G-258 is the ready-to-use, non-sterile IPA configuration of Teknipure’s compact 2.5" x 8" 2-ply polyester pocket-cover family. Choose it when the process calls for 70% IPA and standardized factory saturation is preferable to manually wetting a dry TM-QP258 cover.

The cover is the working contamination-control surface

In the assembled TekniMop™ system, the frame establishes cleaning footprint and maneuverability, while the handle establishes reach and leverage. TM-QP70G-258 is the component that directly contacts the critical surface and delivers the presaturated IPA. Its material, wetness, surface contact, cleaning pattern, and change-out point therefore directly influence the cleaning process.

System principle: Frame = access and footprint. Handle = reach and leverage. Cover = direct cleaning interface. Presaturation + technique = solution delivery at the surface.

Specifications (SKU controls for RFQs, SOPs, and receiving)
  • Manufacturer: Teknipure
  • Product: TekniMop™ 2-Ply Polyester Pocket Mop Cover, 70% IPA
  • Part number: TM-QP70G-258
  • Cover size: 2.5" x 8"
  • Material: 2-ply polyester knit
  • Attachment style: Pocket mop cover
  • Condition: Presaturated
  • Presaturation: 70% IPA
  • Sterility: Non-sterile
  • Cleanroom environment: Manufacturer lists ISO Class 5–8
  • Packaging: 15 covers/resealable gusset bag, 10 bags/case
  • Total case quantity: 150 covers/case
  • Compatible carbon fiber frame: TKM27, 2" x 7"
  • Compatible stainless steel system: TM-QP258-SS, 2.5" x 8"

Configuration-control point: Teknipure specifically identifies TM-QP70G-258 for use with its carbon fiber and stainless steel mop systems, including the 2" x 7" TKM27 carbon fiber frame. Do not reject the designated pairing because the nominal cover dimensions are larger than the underlying frame.

70% IPA presaturation: standardized solution loading before the cover reaches the operator

Teknipure supplies TM-QP70G-258 already presaturated with 70% IPA. The manufacturer specifically positions this format as a way to eliminate manual measuring or spraying and provide a consistent IPA wetness level for each cleaning cycle.

  • Ready to use: removes the separate step of manually applying IPA to a dry mop cover.
  • Standardized chemistry: the cover arrives with the specified 70% IPA presaturation rather than relying on operator-selected chemistry.
  • Consistent wetness: factory presaturation helps reduce variation associated with manual spraying or pouring.
  • Reduced preparation: simplifies setup where 70% IPA is already the approved chemistry for the cleaning step.
  • Controlled delivery: the 2-ply construction retains solution and releases it during surface contact.

Process distinction: Presaturation standardizes the starting condition of the mop cover. It does not eliminate the need to control cleaning technique, surface coverage, evaporation, cover change-out, or any process-specific contact requirement.

Self-standing resealable gusset bag: packaging is part of the wetness-control strategy

TM-QP70G-258 is packaged 15 covers per resealable gusset bag. Teknipure specifically designed the packaging to help reduce chemical evaporation after opening and maintain a more consistent mop saturation level during use.

  • Resealable closure: helps limit IPA loss between cover removals.
  • Self-standing design: allows the bag to remain upright during use.
  • Reduced work-surface footprint: Teknipure identifies the standing format as an operator-convenience and contamination-control feature.
  • Multiple covers per bag: 15 covers are available from one working package.
  • Case configuration: 10 bags/case, for a total of 150 covers.

Operational rule: Reseal the package promptly according to the facility procedure after removing a cover. IPA is volatile; leaving the package open unnecessarily can allow solvent loss and change the condition of the remaining covers.

Controlled liquid release: carrying IPA from the package to the surface

Teknipure identifies the thick 2-ply polyester construction as providing reliable liquid retention and controlled release. The purpose is not simply to hold IPA inside the cover, but to deliver solution across the working surface as the mop moves through the cleaning pattern.

  • Liquid retention: the double-layer construction holds the presaturated solution within the cover.
  • Controlled release: IPA transfers from the cover during surface contact.
  • Uniform wetting: Teknipure specifically identifies consistent surface wetting as a benefit of the construction.
  • Compact delivery: the small mop format allows controlled IPA application inside isolators, cabinets, pass-throughs, and other restricted areas.

Surface-control point: A presaturated cover can provide a consistent starting wetness level, but solution delivery will decrease as IPA transfers to the surface and evaporates. Define the coverage or change-out point required by the cleaning procedure.

2-ply polyester knit: low-particulate construction for controlled environments

Teknipure describes TM-QP70G-258 as a low-particulate mop cover manufactured from durable 2-ply polyester knit. The material is designed to minimize particle generation while providing the liquid-holding characteristics required for presaturated cleaning.

Terminology note: Low-particulate or low-linting performance should not be interpreted as particle-free or “lint-free.” Textile cleaning materials can still contribute fibers or particles, and suitability should be evaluated against the requirements of the process.

Non-sterile status: presaturated does not mean sterile

TM-QP70G-258 is supplied non-sterile. Presaturation with 70% IPA does not change the manufacturer-designated sterility status of the product and should not be used as a substitute for a sterile mop cover where the procedure specifically requires sterile consumables.

Sterility control: If the process requires a sterile 2.5" x 8" 2-ply polyester cover presaturated with 70% IPA, select TM-QP70G-258S rather than TM-QP70G-258.

ISO 5–8 positioning: qualify the complete cleaning process

Teknipure lists TM-QP70G-258 for ISO Class 5–8 cleanroom environments. Manufacturer-listed industries include pharmaceutical and biologics operations, medical device and optics, compounding pharmacies, laboratories, and academia.

Qualification point: The manufacturer’s ISO environment listing does not independently qualify the product for every process performed within those classifications. Final suitability depends on the cover SKU, sterility requirement, IPA cleaning step, hardware, target surface, cleaning procedure, and facility contamination-control requirements.

Frame compatibility: compact carbon fiber and stainless steel systems

Teknipure states that TM-QP70G-258 is designed for use with its carbon fiber and stainless steel mop systems and with compatible 2" x 7" or 2.5" x 8" mop frames. The manufacturer specifically lists TKM27 and TM-QP258-SS as compatible products.

  • TKM27: 2" x 7" carbon fiber flat mop frame
  • TM-QP258-SS: 2.5" x 8" stainless steel flat mop frame and extendable handle system
  • Cover: TM-QP70G-258, 2.5" x 8" pocket configuration
  • Carbon fiber handle selection: determined independently by required reach and operator control when using TKM27

Configuration principle: Use manufacturer-designated compatibility rather than attempting to match frame and cover dimensions exactly. The larger cover dimensions provide the material required to fit over and retain the cover on the underlying frame.

TM-QP258 vs. TM-QP70G-258: dry flexibility or ready-to-use consistency?
  • TM-QP258: dry and non-sterile — facility selects and loads the compatible chemistry.
  • TM-QP70G-258: 70% IPA presaturated and non-sterile — chemistry and starting wetness are factory controlled.
  • Choose dry when: multiple approved chemistries may be required or the process specifies facility-controlled wetting.
  • Choose presaturated when: 70% IPA is already the required chemistry and ready-to-use consistency is valuable.

Selection principle: Presaturated is not automatically “better” than dry. The correct configuration is the one that matches the validated chemistry-delivery method used by the facility.

70% IPA in the cleaning process: know what step the cover is performing

TM-QP70G-258 provides a convenient method for applying 70% IPA to compatible controlled-environment surfaces. Depending on the facility process, IPA may be used for cleaning, residue removal, sanitization, or another defined contamination-control step.

  • Preclean where required: visible or heavy soil may require removal before the IPA step.
  • Follow the approved process: use the cover only where 70% IPA is appropriate for the target surface and contamination-control objective.
  • Account for evaporation: IPA is volatile, particularly across exposed surfaces and opened packaging.
  • Maintain adequate wetness: do not continue using a cover after it can no longer deliver the surface condition required by the SOP.
  • Respect material compatibility: verify that 70% IPA is acceptable for the equipment or surface being cleaned.

Important: Do not treat “70% IPA” as a universal cleaning instruction. The facility must define where IPA belongs in the cleaning or disinfection program and how the treated surface is to be processed.

What TM-QP70G-258 is designed to support (typical use cases)
  • Cleaning isolators and RABS
  • Cleaning biological safety cabinets
  • Cleaning gloveboxes and pass-through chambers
  • Cleaning equipment surfaces, work surfaces, and benches
  • Reaching confined and difficult-to-access areas with compatible mop hardware
  • Precleaning before subsequent disinfectant applications where appropriate
  • 70% IPA application to compatible controlled-environment surfaces
  • Removal of compatible process residues
  • Controlled spill-management applications where 70% IPA presaturation is appropriate
Cleaning technique: consistent starting wetness still requires controlled movement

Factory presaturation reduces variation in how the cover begins the cleaning process, but the operator still controls how that cover moves across the surface. A repeatable pass pattern and defined change-out point help prevent skipped areas and unnecessary redistribution of collected contamination.

  • Remove one cover as required: minimize unnecessary exposure of the remaining presaturated covers.
  • Reseal the bag: limit IPA evaporation from covers remaining in the package.
  • Install securely: ensure the pocket cover is properly seated on the compatible frame.
  • Use controlled overlapping passes: maintain complete surface coverage.
  • Progress systematically: work cleaner-to-less-clean where applicable to the facility procedure.
  • Avoid unnecessary backtracking: limit repeated movement of a loaded cover over already treated areas.
  • Monitor wetness and loading: replace the cover when it no longer provides the required solution delivery or reaches the defined contamination threshold.

Contamination-control principle: Factory saturation standardizes the starting point; the SOP must still define the stopping point.

Best-practice use (70% IPA presaturated pocket cover)
  1. Verify the SKU: confirm TM-QP70G-258 when the procedure requires the non-sterile 70% IPA configuration.
  2. Inspect the package: confirm the resealable gusset bag is intact and appropriate for introduction into the process.
  3. Open according to procedure: avoid leaving the package unnecessarily exposed.
  4. Remove the required cover: minimize handling of covers remaining in the bag.
  5. Reseal promptly: close the package to help reduce IPA evaporation.
  6. Install on compatible hardware: fully seat the pocket cover on the designated frame.
  7. Follow the defined pass pattern: maintain cleaning direction, overlap, and zoning requirements.
  8. Monitor IPA delivery: do not continue using the cover after its wetness falls below the process requirement.
  9. Change at the defined trigger: replace based on coverage area, contamination loading, zone transition, wetness, or other SOP criteria.
  10. Handle after use according to procedure: follow facility requirements for disposal and for any contamination encountered during cleaning.
2.5" x 8" 2-ply polyester family: four configurations, four different process roles
  • TM-QP258: dry, non-sterile — maximum chemistry flexibility with facility-controlled wetting
  • TM-QP70G-258: 70% IPA, non-sterile — ready-to-use IPA with factory-controlled starting wetness
  • TM-QP258S: dry, sterile — sterile cleaning interface with facility-controlled chemistry loading
  • TM-QP70G-258S: 70% IPA, sterile — sterile cleaning interface plus ready-to-use IPA presaturation

Do not substitute by appearance: These covers share a common size and material family but are not operationally interchangeable when a procedure specifies sterility or a particular chemistry-delivery method.

Change-out triggers: when a presaturated cover has reached the end of its useful cleaning cycle
  • Insufficient wetness: the cover can no longer provide the surface condition required by the process.
  • Visible contamination: the working face has accumulated obvious soil or residue.
  • Defined coverage limit: the validated method assigns a maximum surface area or cleaning zone per cover.
  • Zone transition: the SOP requires a fresh cover before entering another controlled area.
  • Damage: the cover is torn, compromised, or no longer retained correctly on the frame.
  • Process transition: a different cleaning step or chemistry requires a fresh consumable.

Contamination-control principle: A clean cover can remove contamination; an overloaded cover can redistribute it. Define change-out by the cleaning process rather than waiting for the cover to become obviously unusable.

Misuse controls & selection cautions
  • Do not treat TM-QP70G-258 as sterile: the manufacturer lists this SKU as non-sterile.
  • Do not manually add another chemistry without process approval: the cover is already presaturated with 70% IPA.
  • Do not leave the gusset bag open unnecessarily: IPA evaporation can change the condition of remaining covers.
  • Do not assume presaturation guarantees process efficacy: technique, coverage, wetness, and process requirements still apply.
  • Do not substitute the sterile and non-sterile versions: use the exact SKU required by the procedure.
  • Do not select hardware by dimensions alone: follow Teknipure’s designated compatibility.
  • Do not interpret low-particulate as particle-free or lint-free: use realistic contamination-control terminology.
  • Do not continue using a dry or overloaded cover: follow the defined change-out criteria.
  • Do not assume 70% IPA is suitable for every surface: confirm material and process compatibility.
TM-QP70G-258 selection logic
  • Choose TM-QP70G-258 when: the procedure calls for a non-sterile 2-ply polyester pocket cover already presaturated with 70% IPA.
  • Choose it when consistency matters: factory saturation is preferred over operator-applied IPA.
  • Choose it when preparation time matters: the cleaning step benefits from a ready-to-use consumable.
  • Choose TM-QP258 instead when: the facility needs a dry cover for another compatible chemistry or facility-controlled wetting.
  • Choose TM-QP70G-258S instead when: the process requires both sterile status and 70% IPA presaturation.
  • Choose TM-QP258S instead when: the process requires sterility but calls for a dry cover or another facility-applied compatible chemistry.
  • Pair with TKM27 when: using Teknipure’s compact carbon fiber system.
  • Pair with TM-QP258-SS when: using Teknipure’s designated stainless steel system.

Simple decision rule: If the SOP says non-sterile + 70% IPA + compact pocket mop, TM-QP70G-258 removes the chemistry-loading step while preserving the 2-ply polyester cleaning interface.

Why source TekniMop™ through SOSCleanroom
  • Exact-SKU selection: SOSCleanroom can help distinguish between dry, 70% IPA, sterile, and non-sterile configurations within the same TekniMop™ cover family.
  • System-level support: We can help align the mop cover with the appropriate frame, handle, cleaning step, and other controlled-environment consumables.
  • Configuration control: Standardizing the exact presaturated cover helps reduce unintended variation in chemistry-delivery method across purchasing cycles.
  • Documentation support: We can help customers identify current Teknipure technical documentation for purchasing, qualification, and SOP review.
  • One-cart procurement: Source TekniMop™ covers and hardware alongside disinfectants, IPA, gloves, wipers, and other critical-environment consumables.
Manufacturer documentation (authoritative references)
  • Teknipure TM-QP70G-258 product page: Click Here
  • TekniMop™ Small Surface & Isolator Cleaning Tools Technical Data Sheet: Click Here
If you have any questions please email us at Sales@SOSsupply.com or give us a call at (214)340-8574. OR check out the AI ChatBot powered by SOSCleanroom data libraries - give it a try! THIS IS NEW FOR 2026! © 2026 SOSCleanroom. All rights reserved.